VoIP Mailing List Archives

[sias at cpdata.co.za]

Hi,

Im sure this has been beaten to death somewhere... but I have no idea
where. I have spent most of the day trying to get this sorted out but
now its just confounding me.

OK ... I have a trixswitch 0.4 server that I want to add a tdm400p to.
I install all of the requirements (gcc, make, kernel-devel) to actually
compile zaptel and managed to get the card show the following

[root@trixswitch1 conf]# ztcfg -vvv

Zaptel Version: 1.4.12.1
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

4 channels to configure.

So all seems fine up to here. However starting freeswitch yields

2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot
open wanpipe.conf
2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot
open zt.conf
2008-10-21 16:19:32 [ERR] zap_io.c:2155 zap_global_init() No modules
configured!
2008-10-21 16:19:32 [ERR] mod_openzap.c:1861 mod_openzap_load() Error
loading OpenZAP
2008-10-21 16:19:32 [CRIT] switch_loadable_module.c:734
switch_loadable_module_load_file() Error Loading module
/opt/freeswitch/mod/mod_openzap.so
**Module load routine returned an error**

I have been messing arround with the conf/openzap.conf and
conf/autoload_configs/openzap.conf.xml but that message is the only thing I
can get it to show. I have checked the permissions on those files and
moved them arround in between the config dirs... but still no luck.

Any ideas? I know im missing something silly, I just dont know what?.
Thanks,
Sias

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[msc at freeswitch.org]

Does trixswitch build openzap by default?

-MC

Sent from my iPhone

On Oct 21, 2008, at 7:28 AM, Sias Mey <sias@cpdata.co.za> wrote:

[msc at freeswitch.org]

Do you have wanpipe.conf and zt.conf in your conf directory? Are there any permissions issues that need to be addressed?
-MC

On Tue, Oct 21, 2008 at 8:25 AM, Sias Mey <sias@cpdata.co.za (sias@cpdata.co.za)> wrote:

[sias at cpdata.co.za]

I dont have a wanpipe.conf or zt.conf but all the documentation I can
find say I need an openzap.conf.

I was thinking permissions myself so I have tried pretty much everything
I could there starting with the same permissions as the other configs
and ending with world writable files and still no good, so I dont think
its a permission issue.

I am currently installing all the other stuff I need to checkout and
compile from svn, since with nothing else to try that might at least be
a step forward.

Thanks,
Sias

On Tue, Oct 21, 2008 at 08:49:47AM -0700, Michael Collins wrote:

[msc at freeswitch.org]

I don't know about trixswitch but I do know about a regular svn checkout. These files get put into the conf directory:
zt.conf, wanpipe.conf, pika.conf, tones.conf, and openzap.conf

There was a change somewhat recently; formerly all of those files were found in /etc/openzap/ but that is no more. I don't know if trixswitch is up to date on that.

Once you get downloaded make sure that you uncomment the line in src/modules.conf that has openzap because it is not built by default. When openzap builds (as part of the overall freeswitch build process) it will place the above files in the conf directory for you to edit as needed. If you do a "make samples" after the make && make install (and you should) then you will get all of the default config xml files, including conf/autoload_configs/openzap.conf.xml.

Hope this helps!
-MC

On Tue, Oct 21, 2008 at 10:21 AM, Sias Mey <sias@cpdata.co.za (sias@cpdata.co.za)> wrote:

[sias at cpdata.co.za]

Ah Ha ...

That sounds to me like a greatly likely problem... hmmm I shall
experiment further.. but I am thinking that trixswitch probably wanted
the files in /etc ... Thank you very much for your help. I am really
looking forward to some experimentation with this.

Sias


On Tue, Oct 21, 2008 at 11:59:00AM -0700, Michael Collins wrote:

[sias at cpdata.co.za]

It would seem that way... since it is openzap complaining when it starts
up.

and there is a mod_openzap.so in the mods directory.

On Tue, Oct 21, 2008 at 07:56:59AM -0700, Michael S Iokytwjnmiwqasxz Collins wrote: