Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] asterisk 13.33 and polycom


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
jerry.geis at gmail.com
Guest





PostPosted: Thu Aug 06, 2020 7:10 am    Post subject: [asterisk-users] asterisk 13.33 and polycom Reply with quote

I am using asterisk 13.33.0 and POlycom phone with the latest firmware.

The polycom phone is behind a firewall, the server is in the cloud.
If the polycom has just booted - it receives a call, after some time (couple minutes) it no longer receives a ring. I see no errors in the CLI - looks just like the previous call as far as I can tell.


Then reboot the phone and as soon as its ready call it and it rings just liek before. then some time later no longer rings.


   -- Executing [something@smvoice-dialout:4] Dial("SIP/1005-000000ab", "SIP/526,30000,tT") in new stack
  == Using SIP RTP CoS mark 5
    -- Called SIP/526
    -- SIP/526-000000ac is ringing



526 is the extension in question. (my definition follows):
[526]
type=friend
defaultname=526
defaultuser=526
secret=XXXXXXXXX
dtmfmode=RFC2833
host=dynamic
description=Polycom                                                     
context=sip
qualify=yes
rtptimeout=60
rtpholdtimeout=60
rtpkeepalive=60
callerid="Polycom "
qualify=no
canreinvite=yes
timezone=1
nat=force_rport,comedia
disallow=all
allow=ulaw
allow=alaw
allow=gsm



Thoughts on what is happening here or what to try?


Jerry 
Back to top
andres at telesip.net
Guest





PostPosted: Thu Aug 06, 2020 8:48 am    Post subject: [asterisk-users] asterisk 13.33 and polycom Reply with quote

On 8/6/20 8:09 AM, Jerry Geis wrote:

Quote:
I am using asterisk 13.33.0 and POlycom phone with the latest firmware.

The polycom phone is behind a firewall, the server is in the cloud.
If the polycom has just booted - it receives a call, after some time (couple minutes) it no longer receives a ring. I see no errors in the CLI - looks just like the previous call as far as I can tell.


Then reboot the phone and as soon as its ready call it and it rings just liek before. then some time later no longer rings.



Sounds to me like you need to enable keep alives on the Polycom so it keeps the NAT pinhole open in the outbound direction.  It will also help to enable the qualify setting on the PBX itself for the extension so it keeps sending SIP messages to the phone ensuring connectivity in the inbound direction.

qualify=yes

Quote:
   -- Executing [something@smvoice-dialout:4] Dial("SIP/1005-000000ab", "SIP/526,30000,tT") in new stack
  == Using SIP RTP CoS mark 5
    -- Called SIP/526
    -- SIP/526-000000ac is ringing



526 is the extension in question. (my definition follows):
[526]
type=friend
defaultname=526
defaultuser=526
secret=XXXXXXXXX
dtmfmode=RFC2833
host=dynamic
description=Polycom                                                     
context=sip
qualify=yes
rtptimeout=60
rtpholdtimeout=60
rtpkeepalive=60
callerid="Polycom "
qualify=no
canreinvite=yes
timezone=1
nat=force_rport,comedia
disallow=all
allow=ulaw
allow=alaw
allow=gsm



Thoughts on what is happening here or what to try?


Jerry 


--
Andres
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services