VoIP Mailing List Archives :: View topic - [asterisk-users] Problem with "pri show channels" on rasterisk (11.7)

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[asterisk-users] Problem with "pri show channels" on rasterisk (11.7)

VoIP Mailing List Archives Forum Index -> Asterisk Users

View previous topic :: View next topic

Author

Message

rodrigoborgespereira a...
Guest

Posted: Tue Feb 25, 2014 2:58 pm Post subject: [asterisk-users] Problem with "pri show channels"

Hi, I'm running a test system with Ast 11.7 and DAHDI 2.9.0. I loaded a TE205P card. Then I enter asterisk console, and once I do a "pri show channels", the console no longer works correctly. There's no output for any command after that. If I type "pri show" and hit tab for completion, console freezes there, I need to kill session. Any hints? new bug? known issue? Tks

rodrigoborgespereira a...
Guest

Posted: Wed Feb 26, 2014 12:34 pm Post subject: [asterisk-users] Problem with "pri show channels"

Sorry to insist. Maybe I should submit this as a bug?

Thanks.

On Tue, Feb 25, 2014 at 7:57 PM, Rodrigo Borges Pereira <rodrigoborgespereira@gmail.com (rodrigoborgespereira@gmail.com)> wrote:

Quote:

Hi,

I'm running a test system with Ast 11.7 and DAHDI 2.9.0. I loaded a TE205P card. Then I enter asterisk console, and once I do a "pri show channels", the console no longer works correctly. There's no output for any command after that. If I type "pri show" and hit tab for completion, console freezes there, I need to kill session.

Any hints? new bug? known issue?

Tks

sruffell at digium.com
Guest

Posted: Wed Feb 26, 2014 2:28 pm Post subject: [asterisk-users] Problem with "pri show channels"

On Wed, Feb 26, 2014 at 05:34:02PM +0000, Rodrigo Borges Pereira wrote:

Quote:

Sorry to insist. Maybe I should submit this as a bug?

Thanks.

As the owner of a TE205P, it might be easiest to contact Digium's
technical support for installation assistance.

I personally am not aware of any general issues when running "pri
show channels"

Quote:

On Tue, Feb 25, 2014 at 7:57 PM, Rodrigo Borges Pereira <
rodrigoborgespereira@gmail.com> wrote:

Quote:

Hi,

I'm running a test system with Ast 11.7 and DAHDI 2.9.0. I loaded a TE205P
card. Then I enter asterisk console, and once I do a "pri show channels",
the console no longer works correctly. There's no output for any command
after that. If I type "pri show" and hit tab for completion, console
freezes there, I need to kill session.

Any hints? new bug? known issue?

Tks

--
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

rodrigoborgespereira a...
Guest

Posted: Wed Feb 26, 2014 4:04 pm Post subject: [asterisk-users] Problem with "pri show channels"

Indeed, I tested two more cards on this system, and I don't get the same problem with them. Unfortunately, different models (TE122P and TE110P), but still it seems to suggest a problem with the TE205P. Weird manifestation though, because everything else seems ok with, even a patlooptest is just fine. Too bad it's OOW by now Smile

Thanks.

On Wed, Feb 26, 2014 at 7:21 PM, Shaun Ruffell <sruffell@digium.com (sruffell@digium.com)> wrote:

Quote:

On Wed, Feb 26, 2014 at 05:34:02PM +0000, Rodrigo Borges Pereira wrote:

Quote:

Sorry to insist. Maybe I should submit this as a bug?

Thanks.

As the owner of a TE205P, it might be easiest to contact Digium's
technical support for installation assistance.

I personally am not aware of any general issues when running "pri
show channels"

Quote:

On Tue, Feb 25, 2014 at 7:57 PM, Rodrigo Borges Pereira <
rodrigoborgespereira@gmail.com (rodrigoborgespereira@gmail.com)> wrote:

Quote:

Hi,

I'm running a test system with Ast 11.7 and DAHDI 2.9.0. I loaded a TE205P
card. Then I enter asterisk console, and once I do a "pri show channels",
the console no longer works correctly. There's no output for any command
after that. If I type "pri show" and hit tab for completion, console
freezes there, I need to kill session.

Any hints? new bug? known issue?

Tks

sruffell at digium.com
Guest

Posted: Wed Feb 26, 2014 5:22 pm Post subject: [asterisk-users] Problem with "pri show channels"

On Wed, Feb 26, 2014 at 09:03:49PM +0000, Rodrigo Borges Pereira wrote:

Quote:

Indeed, I tested two more cards on this system, and I don't get the same
problem with them. Unfortunately, different models (TE122P and TE110P), but
still it seems to suggest a problem with the TE205P. Weird manifestation
though, because everything else seems ok with, even a patlooptest is just
fine. Too bad it's OOW by now Smile

Thanks.

I would be very surprised this has anything to do with the TE205P
specifically. The command "pri show channels" does not result in any
calls to the drivers. My guess is this has more to do with the state
/ configuration of Asterisk.

--
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

rodrigoborgespereira a...
Guest

Posted: Wed Feb 26, 2014 5:34 pm Post subject: [asterisk-users] Problem with "pri show channels"

I actually meant that card specifically, not a general issue with the model.

But I defer more considerations to when I have the chance to test another TE205.

Quote:

On 26/02/2014, at 22:22, Shaun Ruffell <sruffell@digium.com> wrote:

Quote:

On Wed, Feb 26, 2014 at 09:03:49PM +0000, Rodrigo Borges Pereira wrote:
Indeed, I tested two more cards on this system, and I don't get the same
problem with them. Unfortunately, different models (TE122P and TE110P), but
still it seems to suggest a problem with the TE205P. Weird manifestation
though, because everything else seems ok with, even a patlooptest is just
fine. Too bad it's OOW by now Smile

Thanks.

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> Asterisk Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum