VoIP Mailing List Archives

[bilmar_gh at yahoo.com]

Hi All;

I am facing a problem that the telephon line in Egypt
does not work with the FXO port at the digium card
(TDM22B), and I tried to play in loadzone and
defaultzone without any success, when we call to the
PBX it gives Busy signal sometimes, and othertimes it
rings without any response in Asterisk.

Is there any other configuration I have to do it to
resolve this issue? Any advise about a troubleshooting
method to resolve it?

Any help?
Regards
Bilal
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs

[tzafrir.cohen at xorco...]

On Wed, Feb 13, 2008 at 04:35:43AM -0800, bilal ghayyad wrote:

[bilmar_gh at yahoo.com]

Hi;

The PBX located in Egypt at Cairo city.

I am able to receive calls on the FXO ports at 3rd and
4th ports, but I am not able to place outgoing call
(it gives busy tone that coming from the service
provider, or it gives an voice message from the
service provider that the dialed number is wrong).

I am posting now the needed data that I was able to
collect it:

Asterisk version: Asterisk SVN-branch-1.4-r90231

localhost*CLI> show globals
ignorepat=9
TRUNKMSD=1
IAXINFO=guest
CONSOLE=Console/dsp
PSTNTRUNK=Zap/g1
TRUNK=Zap/g2
zap show status
Description Alarms
IRQ bpviol CRC4
Wildcard TDM400P REV I Board 1 OK 0
0 0


zap show cadences
r1: 125,125,2000,4000
r2: 250,250,500,1000,250,250,500,4000
r3: 125,125,125,125,125,4000
r4: 1000,500,2500,5000

zapata.conf:

[channels]
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=no
hidecallerid=no
callwaiting=yes
usecallingpres=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=no
relaxdtmf=yes
rxgain=15.0
txgain=15.0
group=1
channel => 3
callgroup=1
pickupgroup=1
immediate=yes
busydetect=yes
busycount=3
hanguponpolarityswitch=yes
callprogress=yes

context=Internal
signalling=fxo_ks
channel => 1,2

context=External
signalling=fxs_ks
channel => 3,4

zaptel.conf:

loadzone = uk
defaultzone=uk
fxoks=1,2
fxsks=3,4

Any advise?
Regards
Bilal


---------------------

[bilmar_gh at yahoo.com]

Hi;

Sorry, I forgot to post the zapata version, it is 1.4
but I do not know the release and I do not know how to
know the exact release.

Regards
Bilal
----------