VoIP Mailing List Archives

[peter.reid at morodo.c...]

Hi Guys,

Just new to Asterisk and am completely stumped. I have created two accounts as instructed. Please see below for the config of the user accounts.

[Peter]
type=friend
host=IP address
disallow=all
allow=ulaw
allow=alaw
callerid=Peter <6004>
secret=XXXXXXX
context=default
port=9060
nat=force_rport,comedia
deny=0.0.0.0
permit=IP/255.255.0.0,IP/255.255.0.0,PrvIP/255.255.0.0, PrvIP/255.255.0.0

When attempting to register there appears to be something not allowing the authentication of the client against Asterisk. I am getting a 401 Unauthorized on first attempt and then 403 (Bad auth) on second. Is there any ACL config that I have missed which is not allow a good authentication. I have enabled nat and allowed all public and private IP’s of the two clients with masks.

The CLI console returns the following:

ignore - Apr 16 11:09:57] NOTICE[24359]: chan_sip.c:27724 handle_request_register: Registration from '"6004"<[url=sip:6004@xx.xx.xx.xx:9060]sip:6004@xx.xx.xx.xx:9060[/url]>' failed for 'IP:57836' - No matching peer found
[Apr 16 11:09:57] NOTICE[24359]: chan_sip.c:27724 handle_request_register: Registration from '"6004"<[url=sip:6004@IP:9060]sip:6004@IP:9060[/url]>' failed for 'IP:57836' - No matching peer found
serverIP*CLI>

Have searched under No matching peer found and although there is some info on this it does not appear to satisfy my situation.

Please help.

Best Regards,

Peter



[/url]
This email is free from viruses and malware because [url=http://www.avast.com/]avast! Antivirus protection is active.

[asghar144 at gmail.com]

Hello,Try this



[6004]
type=friend
host=dynamic
disallow=all
allow=ulaw
allow=alaw
callerid=6004 <Peter>

secret=XXXXXXX
context=default
port=9060
nat=force_rport,comedia
deny=0.0.0.0
permit=IP/255.255.0.0,IP/255.255.0.0,PrvIP/255.255.0.0, PrvIP/255.255.0.0







On Wed, Apr 16, 2014 at 12:56 PM, Peter Reid <peter.reid@morodo.co.uk (peter.reid@morodo.co.uk)> wrote:

[jcolp at digium.com]

Peter Reid wrote:

[kevin.larsen at pionee...]

asterisk-users-bounces@lists.digium.com wrote on 04/16/2014 05:56:32 AM:

[peter.reid at morodo.c...]

Hi All,

Thank you guys – your advice was spot on. I will now reach out earlier and not struggle with issues like this for 2 weeks J

Best Regards,

From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kevin Larsen
Sent: Wednesday, April 16, 2014 1:08 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] FW: clients unable to auth


asterisk-users-bounces@lists.digium.com (asterisk-users-bounces@lists.digium.com) wrote on 04/16/2014 05:56:32 AM:

[kevin.larsen at pionee...]

[joshdmetzger at gmail.com]

I would modify the suggestions slightly and either add to it, or replace the reference to voip-info with a link to https://wiki.asterisk.org 


I was just thinking yesterday that voip-info seems out of date for many things I search for, but at this point I'm usually looking up things that are probably not used as frequently, so maybe the more "regular" stuff is more up-to-date on voip-info.  In any case, the Asterisk Wiki seems quite up-to-date and useful.  Also, you can quickly get some good info by doing "core show application <app>" or "core show function <func>" from the Asterisk console, like "core show application dial" gives you all the possible arguments for "Dial", including some useful notes.  Quite handy.


Josh






On Wed, Apr 16, 2014 at 9:22 AM, Kevin Larsen <kevin.larsen@pioneerballoon.com (kevin.larsen@pioneerballoon.com)> wrote:

[jcolp at digium.com]

Josh Metzger wrote: