VoIP Mailing List Archives :: View topic - [asterisk-users] Simultaneous Ring

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[asterisk-users] Simultaneous Ring

VoIP Mailing List Archives Forum Index -> Asterisk Users

View previous topic :: View next topic

Author

Message

scott.haley at edwardj...
Guest

Posted: Wed Jul 16, 2014 1:46 pm Post subject: [asterisk-users] Simultaneous Ring

I have a need to issue a dial command to a number: same => n,Dial(${DIALGROUP1},${TIMER1},t) After a number of seconds, let's say 10 seconds. I want to dial another set of numbers while continuing to ring, or interrupting the first group of numbers. same => n,Dial(${DIALGROUP2},${TIMER1},t) Is there a way to do this without interrupting the first call? Thanks, Scott Haley If you are not the intended recipient of this message (including attachments), or if you have received this message in error, immediately notify us and delete it and any attachments. If you do not wish to receive any email messages from us, excluding administrative communications, please email this request to messages@edwardjones.com along with the email address you wish to unsubscribe. For important additional information related to this email, visit www.edwardjones.com/US_email_disclosure. Edward D. Jones & Co., L.P. d/b/a Edward Jones, 12555 Manchester Road, St. Louis, MO 63131 © Edward Jones. All rights reserved.

kevin.larsen at pionee...
Guest

Posted: Wed Jul 16, 2014 1:53 pm Post subject: [asterisk-users] Simultaneous Ring

asterisk-users-bounces@lists.digium.com wrote on 07/16/2014 01:46:09 PM:

Quote:

From: "Haley,Scott A" <scott.haley@edwardjones.com>
To: "asterisk-users@lists.digium.com" <asterisk-users@lists.digium.com>,
Date: 07/16/2014 01:46 PM
Subject: [asterisk-users] Simultaneous Ring
Sent by: asterisk-users-bounces@lists.digium.com

I have a need to issue a dial command to a number:

same => n,Dial(${DIALGROUP1},${TIMER1},t)

After a number of seconds, let's say 10 seconds. I want to dial
another set of numbers while continuing to ring, or interrupting the
first group of numbers.

same => n,Dial(${DIALGROUP2},${TIMER1},t)

Is there a way to do this without interrupting the first call?

Thanks,
Scott Haley

I believe that what you want to do is best done with Local Channels. See this link:
http://www.asteriskdocs.org/en/3rd_Edition/asterisk-book-html-chunk/DeeperDialplan_id324598.html
for more information.

support at drdos.info
Guest

Posted: Wed Jul 16, 2014 2:01 pm Post subject: [asterisk-users] Simultaneous Ring

Quote:

After a number of seconds, let's say 10 seconds. I want to dial another set of numbers while continuing to ring, or interrupting the first group of numbers.

I'd use queues.

First set of numbers in queue 1, both the first set and second set of number in queue 2. If the call falls out of queue 1, it should fall into queue 2.

Then use the ringall strategy on both queues

Doug

asterisk_list at earth...
Guest

Posted: Thu Jul 17, 2014 2:58 am Post subject: [asterisk-users] Simultaneous Ring

On Wednesday 16 Jul 2014, Haley,Scott A wrote:

Quote:

I have a need to issue a dial command to a number:

same => n,Dial(${DIALGROUP1},${TIMER1},t)

After a number of seconds, let's say 10 seconds. I want to dial another set
of numbers while continuing to ring, or interrupting the first group of
numbers.

same => n,Dial(${DIALGROUP2},${TIMER1},t)

Is there a way to do this without interrupting the first call?

scott.haley at edwardj...
Guest

Posted: Thu Jul 17, 2014 6:57 am Post subject: [asterisk-users] Simultaneous Ring

Thanks AJ, this sounds like what I need.

Thanks,
Scott Haley

If you are not the intended recipient of this message (including attachments), or if you have received this message in error, immediately notify us and delete it and any attachments.

If you do not wish to receive any email messages from us, excluding administrative communications, please email this request to messages@edwardjones.com along with the email address you wish to unsubscribe.

For important additional information related to this email, visit www.edwardjones.com/US_email_disclosure. Edward
D. Jones & Co., L.P. d/b/a Edward Jones, 12555 Manchester Road, St. Louis, MO 63131 © Edward Jones. All rights reserved.

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of A J Stiles
Sent: Thursday, July 17, 2014 2:57 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Simultaneous Ring

On Wednesday 16 Jul 2014, Haley,Scott A wrote:

Quote:

I have a need to issue a dial command to a number:

same => n,Dial(${DIALGROUP1},${TIMER1},t)

After a number of seconds, let's say 10 seconds. I want to dial
another set of numbers while continuing to ring, or interrupting the
first group of numbers.

same => n,Dial(${DIALGROUP2},${TIMER1},t)

Is there a way to do this without interrupting the first call?

This sounds exactly like the sort of situation for which local channels were invented .....

Dial(${DIALGROUP1}&LOCAL/foo@bar) with a longer timeout than 10 seconds. Then in your local channel, wait 10" and Dial(${DIALGROUP2}). The first Dial() will be satisfied when someone answers either a phone in dial group 1, or a phone in dial group 2 set ringing by the Dial() in the local channel.

--
AJS

Note: Originating address only accepts e-mail from list! If replying off- list, change address to asterisk1list at earthshod dot co dot uk .

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

scott.haley at edwardj...
Guest

Posted: Fri Jul 18, 2014 8:02 am Post subject: [asterisk-users] Simultaneous Ring

I have this working but I have one problem. I need to grab values from variables that I have set in the calling context to dial. How would I do that.

[tbs-utils]
exten => s,1,NoOp(Entering tbs-utils for extension ${ARG1})
;Set local variables to be used in the call
same => n,Set(NUMBER=${ARG1})
same => n,Set(GLOBAL(DIALGROUP1)=)
same => n,Set(GLOBAL(DIALGROUP2)=)
same => n,Set(_VM=)
same => n,Set(_TIMER1=)
same => n,Set(_TIMER2=)
same => n,Set(BRANCH=)
same => n,Set(_TO_VM=0)

;Check to see if the Primary SIP trunk is up
same => n,Set(NETWORKSTATUS=${SIPPEER(${GLOBAL(TRUNK1)},status)})

;Setting the TRUNK variable based upon the status of whether Trunk1 is reachable
same => n,Set(TRUNK=${IF($[$[NETWORKSTATUS=UNREACHABLE]]?${GLOBAL(TRUNK2)}:${GLOBAL(TRUNK1)})})

;Calling the agi script
same => n,AGI(agi://localhost/tbs.agi)

;Displaying the values of the variables set in the agi script
same => n,NoOp(Branch number is: ${BRANCH})
same => n,NoOp(DIALGROUP1 is: ${DIALGROUP1})
same => n,NoOp(DIALGROUP2 is: ${DIALGROUP2})
same => n,NoOp(TIMER1 is: ${TIMER1})
same => n,NoOp(TIMER2 is: ${TIMER2})
same => n,NoOp(VM is: ${VM})
same => n,NoOp(TO_VM is: ${TO_VM})

;Check to see if we should go straight to VM
same => n,Gotoif($[${TO_VM} = 1]?200:)

;Dial the primary number and to to the return status
same => n,Dial(Local/Group1-101@Delay&Local/Group2-101@Delay,30)
same => n,Hangup();

[Delay]
;Dial Group 1
exten => Group1-101,1,Verbose(2,Dialing Group 1 set of phones ${GLOBAL(DIALGROUP1)})
same => n,Dial(${DIALGROUP1},20,t)

;Dial Group 2
exten => Group2-101,1,Verbose(2,Dialing Group2 set of phones)
same => n,Verbose(2, Waiting 10 seconds before dialing)
same => n,Wait(10)
same => n,Dial(${DIALGROUP2},${TIMER2},t)

Thanks,
Scott Haley
5-2244

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Haley,Scott A
Sent: Thursday, July 17, 2014 6:57 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Simultaneous Ring

Thanks AJ, this sounds like what I need.

Thanks,
Scott Haley

If you are not the intended recipient of this message (including attachments), or if you have received this message in error, immediately notify us and delete it and any attachments.

If you do not wish to receive any email messages from us, excluding administrative communications, please email this request to messages@edwardjones.com along with the email address you wish to unsubscribe.

For important additional information related to this email, visit www.edwardjones.com/US_email_disclosure. Edward D. Jones & Co., L.P. d/b/a Edward Jones, 12555 Manchester Road, St. Louis, MO 63131 © Edward Jones. All rights reserved.

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of A J Stiles
Sent: Thursday, July 17, 2014 2:57 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Simultaneous Ring

On Wednesday 16 Jul 2014, Haley,Scott A wrote:

Quote:

I have a need to issue a dial command to a number:

same => n,Dial(${DIALGROUP1},${TIMER1},t)

After a number of seconds, let's say 10 seconds. I want to dial
another set of numbers while continuing to ring, or interrupting the
first group of numbers.

same => n,Dial(${DIALGROUP2},${TIMER1},t)

Is there a way to do this without interrupting the first call?

This sounds exactly like the sort of situation for which local channels were invented .....

Dial(${DIALGROUP1}&LOCAL/foo@bar) with a longer timeout than 10 seconds. Then in your local channel, wait 10" and Dial(${DIALGROUP2}). The first Dial() will be satisfied when someone answers either a phone in dial group 1, or a phone in dial group 2 set ringing by the Dial() in the local channel.

--
AJS

Note: Originating address only accepts e-mail from list! If replying off- list, change address to asterisk1list at earthshod dot co dot uk .

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

asterisk_list at earth...
Guest

Posted: Fri Jul 18, 2014 9:16 am Post subject: [asterisk-users] Simultaneous Ring

On Friday 18 Jul 2014, Haley,Scott A wrote:

Quote:

I have this working but I have one problem. I need to grab values from
variables that I have set in the calling context to dial. How would I do
that.

I think you need to prefix your variable names with *two* underscores, to make
them indefinitely heritable down the succession of channels. If they are
prefixed with a single underscore, then they only get inherited *once*; so if
the child channel spawns a grandchild, then any _VARS it inherited from the
parent channel won't exist in the grandchild, but any __VARS will.

--
AJS

Note: Originating address only accepts e-mail from list! If replying off-
list, change address to asterisk1list at earthshod dot co dot uk .

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

scott.haley at edwardj...
Guest

Posted: Fri Jul 18, 2014 9:56 am Post subject: [asterisk-users] Simultaneous Ring

That worked. I had to use the *two* underscores in the agi script where I was setting the values. Thanks.

Thanks,
Scott Haley

If you are not the intended recipient of this message (including attachments), or if you have received this message in error, immediately notify us and delete it and any attachments.

If you do not wish to receive any email messages from us, excluding administrative communications, please email this request to messages@edwardjones.com along with the email address you wish to unsubscribe.

For important additional information related to this email, visit www.edwardjones.com/US_email_disclosure. Edward
D. Jones & Co., L.P. d/b/a Edward Jones, 12555 Manchester Road, St. Louis, MO 63131 © Edward Jones. All rights reserved.

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of A J Stiles
Sent: Friday, July 18, 2014 9:15 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Simultaneous Ring

On Friday 18 Jul 2014, Haley,Scott A wrote:

Quote:

I have this working but I have one problem. I need to grab values from
variables that I have set in the calling context to dial. How would I
do that.

I think you need to prefix your variable names with *two* underscores, to make them indefinitely heritable down the succession of channels. If they are prefixed with a single underscore, then they only get inherited *once*; so if the child channel spawns a grandchild, then any _VARS it inherited from the parent channel won't exist in the grandchild, but any __VARS will.

--
AJS

Note: Originating address only accepts e-mail from list! If replying off-
list, change address to asterisk1list at earthshod dot co dot uk .

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

asterisk_list at earth...
Guest

Posted: Fri Jul 18, 2014 10:24 am Post subject: [asterisk-users] Simultaneous Ring

On Friday 18 Jul 2014, Haley,Scott A wrote:

Quote:

That worked. I had to use the *two* underscores in the agi script where I
was setting the values. Thanks.

Glad you got it working in the end!

I always like to use plenty of NoOp() statements to make sure the variables
I'm setting are correct, especially when it requires fiendish logic which has
to jump around between contexts and spawn channels. If you are in the habit
of using "n" for "next" instead of explicit step numbers, so much the better,
as this means extraneous NoOp()s can easily be commented out or removed later.

--
AJS

Note: Originating address only accepts e-mail from list! If replying off-
list, change address to asterisk1list at earthshod dot co dot uk .

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> Asterisk Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum