VoIP Mailing List Archives :: View topic - [asterisk-users] DUNDi with two servers

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[asterisk-users] DUNDi with two servers

VoIP Mailing List Archives Forum Index -> Asterisk Users

View previous topic :: View next topic

Author

Message

jmr.richardson at gmai...
Guest

Posted: Sun Feb 24, 2008 2:14 pm Post subject: [asterisk-users] DUNDi with two servers

JR Richardson

Quote:

Hi,

I'm having difficulties with using DUNDi between two servers. If it were
three I think I could control looping by limiting TTL, but with two I'm
not
sure how to prevent a loop causing bad things to happen. I've tried ttl=1
but things still blow up.

The DUNDi configurations are pretty simple and work just fine in both
directions as long as only one of them is using the switch =>
DUNDi/context.
dundi lookup <number>@dundified works great as well as test calls.

What is the proper method of handling DUNDi between only two servers?
Should
I be using a dummy context on one server to handle this?

I'm listing the relevant files below for only one server for brevities
sake.

-----------------------------------
dundi.conf

[general]
department=Test Lab
organization=My Test lab
locality=Anywhere
stateprov=CA
country=US
email=email at email.com
phone=+5555555555
entityid=00:11:22:33:44:55
cachetime=5
ttl=1
autokill=yes

[mappings]
dundified =>
internal,0,SIP,${NUMBER}@server1.domain.com<NUMBER%7D at server1.domain.com>
,nopartial

[55:44:33:22:11:00]
model=symmetric
host=server2.domain.com
inkey=dundikey
outkey=dundikey
include=dundified
permit=dundified
qualify=yes
order=primary

-----------------------------------
extensions.conf

[general]
static = yes
writeprotect = no
clearglobalvars = no

[globals]

[default]
include => internal
include => parkedcalls

[internal]
include => external
include => parkedcalls
switch => DUNDi/dundified

exten => 300,1,Dial(SIP/300)
exten => 300,n,Hangup()
exten => 5551234567,1,Goto(300,1)

exten => 301,1,Dial(SIP/301)
exten => 301,n,Hangup()
exten => 8885551212,1,Goto(301,1)

exten => _NXXNXXXXXX,1,Dial({$EXTEN}@voipprovider)
exten => _NXXNXXXXXX,n,Hangup()

[external]
exten => 5551234567,1,Goto(internal,300,1)

-----------------------------------
sip.conf

[dundified]
type=friend
dbsecret=dundi/secret
context=internal

[voipprovider]
type=friend
host=voipprovider.web
dtmfmode=rfc2833
insecure=port,invite
disallow=all
allow=g729
context=external

[300]
type=peer
callerid=300
username=300
secret=secret
host=dynamic
context=internal
mailbox=300 at default
notifyringing=yes
notifyhold=yes
limitonpeers=yes
call-limit=2

[301]
type=peer
callerid=301
username=301
secret=secret
host=dynamic
context=internal
mailbox=301 at default
notifyringing=yes
notifyhold=yes
limitonpeers=yes
call-limit=2

Thanks in advance!

You can't map the [internal] context in dundi.conf because you have the
switch => DUNDi/dandified statement in there. That is causing your loop.

Map dundi to a dial plan [context] that doesn't have access to the
[internal] context. Put your dundi extensions in the new context as a NoOp
and things should work fine.

JR
---
Engineering for the Masses.

thrills3k3r at gmail.com
Guest

Posted: Sun Feb 24, 2008 5:02 pm Post subject: [asterisk-users] DUNDi with two servers

Aha, thanks guys. I like the idea of just using NoOp extensions that don't
actually do anything so I'm going to give that a shot.
On Sun, Feb 24, 2008 at 2:14 PM, JR Richardson <jmr.richardson at gmail.com>
wrote:

Quote:

JR Richardson

You can't map the [internal] context in dundi.conf because you have the
switch => DUNDi/dandified statement in there. That is causing your loop.

Map dundi to a dial plan [context] that doesn't have access to the
[internal] context. Put your dundi extensions in the new context as a
NoOp
and things should work fine.

JR
---
Engineering for the Masses.

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080224/cb03ca85/attachment.htm

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> Asterisk Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum