VoIP Mailing List Archives

[cervajs at fpf.slu.cz]

hi,

i need migrate customers from severeal to one asterisk server with
multiple ip aliases
like
eth0 192.168.10.1
eth0:1 192.168.10.20
eth0:2 192.168.10.30

i must preserve endpoint configuration to these ip adressess

the problem is if i register to 192.168.10.30, the answer is from
192.168.10.1

are there some ways for this scenario?
1) chan_pjsip?
2) kamailio in front of asterisk on the same server?
3) iptables magic?
4) ...

thanks

--
---------------------------------------
Marek Cervenka
=======================================


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[Derek.Andrew at usask.ca]

You can achieve your goal with policy based routing (http://en.wikipedia.org/wiki/Policy-based_routing). You would need to install the iproute2 package and set up ip rules for routing.


This would allow you to answer endpoints registering on 192.168.10.30 with the address 192.168.10.30.

On Fri, Aug 29, 2014 at 3:26 AM, Marek Cervenka <cervajs@fpf.slu.cz (cervajs@fpf.slu.cz)> wrote:

[cervajs at fpf.slu.cz]

it looks like i found solution with chan_pjsip

/etc/asterisk/pjsip.conf
[transport-udp-net1]
type=transport
protocol=udp
bind=192.168.10.20

[transport-udp-net2]
type=transport
protocol=udp
bind=192.168.10.30

[net1_user1]
type=endpoint
transport=transport-udp-net1

[net2_user1]
type=endpoint
transport=transport-udp-net2

can you someone confirm this solution?


Dne 29.8.2014 v 11:26 Marek Cervenka napsal(a):