VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
tzafrir.cohen at xorco...
Guest
|
 Posted: Wed Feb 27, 2008 7:01 am Post subject: [asterisk-users] [URGENT] Zap channels fail to load |
 |
|
On Wed, Feb 27, 2008 at 10:25:28AM +0000, linuxian iandsd wrote:
| Quote: | i believe your problem is at the hardware/driver/provider level so you will
be looking at the :
zaptel.conf & zapata.conf files
i don't know if this will help but here is my config for a E1 euroISDN line:
|
But this is not the case here.
If your provider gives you a full PRI and you configure it as a
fractional PRI (and configure it properly), Asterisk will start and
configure the span. Some calls from the provider may not go through. But
that only happens after Asterisk configures the span. And the OP did not
get that far.
The problem of the OP was a failed ioctl. Which means that the version
of Asterisk was built with a version of zaptel.h that is incompatible
with the one used to build the zaptel kernel modules running on that
system.
I had a theory on how this had happened in the specific case. But so far
the OP has not confirmed or denied it.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.cohen at xorcom.com
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir |
|
| Back to top |
|
 |
gandresin at gmail.com
Guest
|
| Posted: Wed Feb 27, 2008 7:05 am Post subject: [asterisk-users] [URGENT] Zap channels fail to load |
|
|
On Wed, Feb 27, 2008 at 12:45 PM, Tzafrir Cohen
<tzafrir.cohen at xorcom.com> wrote:
| Quote: | Are the new zaptel drivers loaded?
cat /sys/module/zaptel/version
|
Yes. I did fix it upgrading it back (and rebuilding asterisk and
libpri) to zaptel 1.4.8
--
Andres Jimenez
GPG : http://www.andresin.com/gpg/gandresin at gmail.com.asc |
|
| Back to top |
|
|
tzafrir.cohen at xorco...
Guest
|
| Posted: Wed Feb 27, 2008 7:45 am Post subject: [asterisk-users] [URGENT] Zap channels fail to load |
|
|
On Tue, Feb 26, 2008 at 12:27:16PM +0000, Andres Jimenez wrote:
| Quote: | Comes from a previous message.
On Tue, Feb 26, 2008 at 12:25 PM, Tzafrir Cohen
<tzafrir.cohen at xorcom.com> wrote:
| Quote: | Here's my guess:
You built Asterisk vs. a newer Zaptel (that happened to have the
Astribank drivers).
Now you reverted to the old Zaptel drivers. And those are of a version
before 1.4.8 . Hence the new ZT_GET_PARAMS of 1.4.8 does not exist
there. The ZT_GET_PARAMS ioctl Asterisk sends is thus not understood by
Zaptel and fails.
Unrevert to the new Zaptel version (of the modules. Stick with the
original zaptel.conf). Does this help?
|
I did build asterisk using zaptel 1.4.8 about 10 days ago. We were
having issues with DTMF , so I downgraded zaptel (rebuilding Asterisk
and libpri, of course) to 1.4.7, but the problems remained.
|
Are the new zaptel drivers loaded?
cat /sys/module/zaptel/version
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.cohen at xorcom.com
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
