VoIP Mailing List Archives

[support at drdos.info]

Hopefully someone can point me in the correct direction.

I had a 1.4x system die on me yesterday, while I was prepping a new machine to replace it. Took the machine on site yesterday and spent the day and part of the evening getting things working.

This morning, I finished up converting my dial plan, knowing there'd be calls of things that I missed.

While testing, I've noted that all inbound and outbound calls over the PRI give no ring indications. This is my second converted system and the first system doesn't have this issue. The system is out of the Detroit, MI area and the provider is TDS.

One thing of note: I originally started off with 11.12.0, but was having problems with paging and the sound card, so I back dated to 11.9.0 (Same as my first convert) after I deleted the /var/lib/asterisk/modules folder.

Machine setup below:

lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 7.6 (wheezy)
Release: 7.6
Codename: wheezy

uname -a

Linux livasterisk 3.9.11-custom-3.9.11 #1 SMP Thu Jan 9 12:18:01 EST 2014 x86_64 GNU/Linux

dahdi config:

cat system.conf
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
defaultzone=us
loadzone=us
echocanceller=oslec,1-23

span=2,0,0,esf,b8zs
fxsks=25-32
fxoks=33-48
defaultzone=us
loadzone=us

chan_dahdi:

[channels]
;
;

switchtype=national
context=pri
signalling=pri_cpe
echocancel=yes
echotraining = yes
;echocancelwhenbridged = yes
pridialplan=unknown
group=1
rxgain=-1.0
txgain=-4.0
usecallerid=yes
callerid=asreceived
channel=1-23

Any suggestions would be appreciated!

Doug

--
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[nengelberth at team-me...]

Have you checked your /etc/asterisk/indications.conf file? I know I had a couple systems where I tried to be minimalist with the config files I used, and forgot to bring the indications.conf over from the samples -- the symptom those times was that the caller (inbound, outbound, or extension to extension) wouldn't hear any ringing tone while the call was ringing at the other end.

At the CLI, you can use "indication show" to list all loaded indication types, and "indication show <zone>" to see the details about a specific one. I can't remember/find the way to display in CLI what the currently loaded default indication zone is, though there should be a line in the indications.conf file at a minimum.


Thank you,

Noah Engelberth
System Administration
MetaLINK Technologies
nengelberth@team-meta.net
419-990-0342

[support at drdos.info]

[support at drdos.info]

Doug Lytle wrote:

[EWieling at nyigc.com]

Ringback problems are a pain in the neck to troubleshoot. You don't mention your endpoint, but if the endpoint is sip, play around with the prematuremedia and progressinband options in sip.conf. The comments for these two settings in sip.conf.sample are completely and totally confuzing. Try different compications and see if any of them make any difference.

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Doug Lytle
Sent: Thursday, September 18, 2014 7:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk 11.9.0 PRI no ring indications

Doug Lytle wrote:

[support at drdos.info]

Eric Wieling wrote:

[terry at brummell.net]

[support at drdos.info]

[support at drdos.info]

Doug Lytle wrote: