VoIP Mailing List Archives

[oza.4h07 at gmail.com]

Hello,

I'm preparing a setup before installing it within the next few days.

In this setup, I'm using a SPA112 as an ATA for an analog phone.
The target phone is a Gigaset A400 DECT handset.

In my lab, I've got another A400 handset and an old Matracom 46 handset.

When I connect my Matracom 46 handset to my SPA112, I can send and
receive calls.
When I connect my A400 handset to the same SPA112 port, I can receive
calls (from SIP to analog) but cannot send (from analog to SIP) :
nothing shows at asterisk console.

When connecting this A400 handset to my provider box (which also has
an FXS port), I can successfully send and receive.

From this, I conclude my A400 works but differently from my other handset.

Basically, when dialing out with my A400, I'm observing this:
- I dial my full number (eg 0123456789) then press Send key (as with a
mobile phone),
- then I hear a long dialing tone from the SPA112 (unplugging the
cable between both cut this tone off),
- then I hear dialing tones back (those are sent quite fast, one tone
for each dialed digit),
- then I hear a busy tone and nothing shows at asterisk console.

Which SPA112 settings shall I change to get this A400 to work ?
What would you suggest ?

Regards

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[oza.4h07 at gmail.com]

After hours of testing, adding a comma into my FXS port dialplan made it.
This obviously relates to some timout handling but beside that, I
still have to understand why this seems mandatory.

Regards

2014-10-03 11:33 GMT+02:00 Olivier <oza.4h07@gmail.com>: