VoIP Mailing List Archives

[andrew at convergedgro...]

Hi Guys

I have a 4 port PRI card that I need to setup each port in their own group.
In chan_dahdi.conf I have the following which works for one port
How do I add the rest of the ports in their own groups so that I can have different signaling on each?


[channels]
language=en
switchtype=euroisdn
pridialplan=unknown
resetinterval=600
echocancel=yes
echotraining=yes
;echocancelwhenbridged=no
;rxgain=0
;txgain=0
callerid=asreceived
musiconhold=default
group=1
overlapdial=yes
signalling=pri_cpe
context=extensions
channel => 1-15,17-31
jbenable= yes
jbforce= yes
jbmaxsize= 120
jbimpl= fixed
jbresyncthreshold= 1000

[webaccounts173 at jgoe...]

[andrew at convergedgro...]

4 Port PRI sangoma a104
From: jg [mailto:webaccounts173@jgoettgens.de]
Sent: Wednesday, March 18, 2015 2:09 PM
To: Andrew Colin; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] 4 Port PRI

[dnoll at wi.rr.com]

When parsing the config file, all the current settings are applied when the 'channel => ' directive is encountered.  So something like this will make the three remaining groups and set signalling on ports 1 & 3 as pri_cpe and ports 2 & 4 as pri_net. 

; setting specific to Group 2
group=2
signalling=pri_net
channel =>  <channels for group 2>


; settings specific to group 3
group=3
signalling=pri_cpe
channel => <channels for group 3>


; settings specific to group 4
group=4
signalling=pri_net
channel => <channels for group 4>




BTW, this also means that the jitter buffer settings in your example are not in effect for the first group, but would be for the rest.  All other settings would be the same for all ports.

On Wed, Mar 18, 2015 at 7:20 AM, Andrew Colin <andrew@convergedgroup.net (andrew@convergedgroup.net)> wrote: