VoIP Mailing List Archives

[himbeere at meine-oma.de]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Am 21.04.15 um 13:38 schrieb akhilesh chand:

[omakhileshchand at gma...]

Hi Thomas,

Could you tell how can I change the protocol of corresponding port means 5060 is configured with tcp protocol I want to configured with udp. When I execute nmap -p5060 xx.xx.xx.xx I got below output




[root@ip-172-31-32-117 cel]# nmap -p5060 xx.xx.xx.xx


Starting Nmap 5.51 ( http://nmap.org ) at 2015-04-21 11:19 UTC
Nmap scan report for ec2-xx-xx-xx-xx.us-west-2.compute.amazonaws.com (xx.xx.xx.xx)
Host is up (0.00080s latency).
PORT     STATE    SERVICE
5060/tcp filtered sip


Nmap done: 1 IP address (1 host up) scanned in 0.23 seconds



Where I'm seeing 5060 is configured with tcp. 




Regards
Akhilesh




On Tue, Apr 21, 2015 at 5:10 PM, Thomas Stein <himbeere@meine-oma.de (himbeere@meine-oma.de)> wrote:

[gboelter at gmail.com]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 04/24/2015 03:34 PM, akhilesh chand wrote:

[gboelter at gmail.com]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 04/24/2015 03:34 PM, akhilesh chand wrote:

[omakhileshchand at gma...]

Hi Guenther,

Thanks for ur reply I have concern from long time I'm not able to login through softphone with AWS Cloud.Please let me know is there any document or guide line for the same.






Regards
Akhilesh


On Fri, Apr 24, 2015 at 1:26 PM, Guenther Boelter <gboelter@gmail.com (gboelter@gmail.com)> wrote:

[gboelter at gmail.com]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 04/24/2015 05:35 PM, akhilesh chand wrote:

[helvio.listas at gmail...]

Hi Akhilesh,

SIP protocol use port 5060 (default) and many other ports to stablish
calls. You need to check if there is AWS firewall rule that allow your
communication from your client external IP and your AWS host.

Also, think in use IAX intead of SIP, because SIP protocol has many
trouble when used with NAT, also IAX protocol use only one port (4569)
to everything. When i need allow external clients (throught NAT or not)
i used to use IAX.

If you want i can help you in your environment (SIP or IAX).

Att,
Hélvio Junior
SafeId - Gestão de identidades e Acessos
+55 41 | 9893-2694, single-sign-on.com.br
helvio.junior@safetrend.com.br

On 24/04/2015 06:35, akhilesh chand wrote:

[ghomri.nasser at gmail...]

Hi,

Try as a first step a tcpdump capture to verify if the softphone is actually sending the register message to the server.


For me it seems like the softphone is not able to reach the server !


Best Regards,


On Fri, Apr 24, 2015 at 10:55 AM, Helvio Junior <helvio.listas@gmail.com (helvio.listas@gmail.com)> wrote:

[helvio.listas at gmail...]

I think in a same way.

Or you can run "sip set debug on" on asterisk console to enable sip debugging.

[omakhileshchand at gma...]

Hi Helvio,

Could you tell me what is process to setup an environment for IAX. 




Regards
Akhilesh


On Fri, Apr 24, 2015 at 4:25 PM, Helvio Junior <helvio.listas@gmail.com (helvio.listas@gmail.com)> wrote:

[webaccounts173 at jgoe...]

Am 27.04.2015 um 14:53 schrieb akhilesh chand:

[jcass78 at gmail.com]

Akhilesh,
I have implemented several ec2 instances with both sip and iax2 and have no problems with xlite or hard phones. Have you already opened the ports in the vpc security group on the Amazon side?  Let me know is I can help.
--James On Apr 24, 2015 3:34 AM, "akhilesh chand" <omakhileshchand@gmail.com (omakhileshchand@gmail.com)> wrote:

[omakhileshchand at gma...]

Hi James,

Please let me know how could I implement for sip.I will appreciate your help.  


Regards
Akhilesh


On Mon, Apr 27, 2015 at 7:01 PM, James Cass <jcass78@gmail.com (jcass78@gmail.com)> wrote:

[jcass78 at gmail.com]

Akhilesh, for sip, just make sure you have up 5060 open and up 10000-20000 open in the security group to the public address where your phones will be (soft or hard phones). You shouldn't need the address of your trunk provider (since you should register to them). Of course you'll still need 22 open to manage the server, but you already have that. That's all you need from a security group perspective.  Make sure that right then we can inspect your config files. On Apr 28, 2015 1:09 AM, "akhilesh chand" <omakhileshchand@gmail.com (omakhileshchand@gmail.com)> wrote: