VoIP Mailing List Archives

[el.es.cr at gmail.com]

Hi,
please whoever has some expertise in choice of BRI ISDN cards,
please restore my faith in community support

(on private email I can probably explain more than fits for a public forum)

Most I'd like to ask is about what to choose, out of what is available...

My locality is United Kingdom, lines from British Telecom (BT),
but any advice / pointers (I googled around already) are welcome...

My system to fit this card into, is FreePBX Distro with Asterisk 11,
already running with incoming SIP trunk(s);
I wish to extend it to accept incoming 'landline' ISDN BRI (6 channels / 3 ports).

So far the interesting option(s) were Sangoma A500 and Digium B410P...
(the appliance is adopted from an old desktop that still only ever has PCI2.0 slots,
no PCIE)
(there are also OpenVOX's cards, although their installation guide is somewhat, well...
in the old kernel era...)

Anyone who use(d) any of the above, not necessarily on a FreePBX - you're welcome...

Kind Regards,
Lukasz


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[oza.4h07 at gmail.com]

2015-05-26 12:17 GMT+02:00 Lukasz Sokol <el.es.cr@gmail.com (el.es.cr@gmail.com)>:

[mvakondios at gmail.com]

Checkout Beronet ISDN cards and Berofix Gateway (appliance or pci card)

Personally for my last installation I chose Berofix card which is rock solid and reliable, yet easily configurable.


With berofix you don't need telephony drivers on the host system, the isdn card is detected as a NIC and all configuration is done using a web interface.


Then you configure FreePBX a new trunk to use the berofix IP and that's it!


This way the mISDN and other channel drivers' burden is skipped and works very well for me so far!










On 26 May 2015 at 16:52, Olivier <oza.4h07@gmail.com (oza.4h07@gmail.com)> wrote:

[toufic.khreish at gmai...]

Beronet Gateway BFSB2HY , it works well for me two.

From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Markos Vakondios
Sent: Tuesday, May 26, 2015 4:00 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Seeking advice about ISDN BRI Cards

Checkout Beronet ISDN cards and Berofix Gateway (appliance or pci card)


Personally for my last installation I chose Berofix card which is rock solid and reliable, yet easily configurable.



With berofix you don't need telephony drivers on the host system, the isdn card is detected as a NIC and all configuration is done using a web interface.



Then you configure FreePBX a new trunk to use the berofix IP and that's it!



This way the mISDN and other channel drivers' burden is skipped and works very well for me so far!











On 26 May 2015 at 16:52, Olivier <oza.4h07@gmail.com (oza.4h07@gmail.com)> wrote:

[el.es.cr at gmail.com]

On 26/05/15 14:52, Olivier wrote:

[el.es.cr at gmail.com]

Hi,

Looking that up too, Interesting, thanks !

Lukasz

On 26/05/15 14:59, Markos Vakondios wrote:

[el.es.cr at gmail.com]

Replying to myself thanks for all the suggestions, they are helpful.
but if someone, somewhere, whatever time zone you're in,
can bear to answer a few n00b questions, regarding any of the mentioned cards,
please email me
(in case gmane hid my email : el (dot) es (dot) cr (at) (the google mail service)...)

Thanks in advance,
Lukasz


On 26/05/15 11:17, Lukasz Sokol wrote:

[jd.girard at sysnux.pf]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

HI,

I'm happy with OpenVox BRI ISDN cards, using Dahdi.


Thanks,
- --
Jean-Denis Girard

SysNux Systèmes Linux en Polynésie française
http://www.sysnux.pf/ Tél: +689 40.50.10.40 / GSM: +689 87.79.75.27

Le 26/05/2015 00:17, Lukasz Sokol a écrit :

[el.es.cr at gmail.com]

Thank you all for valuable input,

another question: when do I actually need the echo cancellation
(hardware / on board /on module ) ?

Lukasz

On 26/05/15 11:17, Lukasz Sokol wrote:

[webaccounts173 at jgoe...]

[el.es.cr at gmail.com]

On 28/05/15 10:18, jg wrote: