VoIP Mailing List Archives

[greg at gregandeva.net]

I have found several places where it is explained how to do this, and I have got the following setup, but it is not working (the provider claims they are not getting a proper caller ID setting from me).

I have a number of extensions that are shorthand, that I will use one of as an example (real number hidden):


exten => 2473,1,Macro(callout,##########)



Then this (actual number hidden again):


[macro-callout]
exten => s,1,Set(CALLERID(num)=##########)
exten => s,2,Set(CALLERID(name)=##########)
exten => s,3,Set(CALLERID(all)="##########" <##########>)
exten => s,4,Dial(${PROVIDER}/"1${ARG1}",30,tr)
exten => s,n,Hangup()





I have also tried setting only the number with the same results:


exten => s,1,Set(CALLERID(num)=##########)
exten => s,2,Dial .....


When I dial that extension, the call goes through, but the caller ID is not correct at the destination.

Does this look right?


My provider claims that I am somehow sending an old number that doesn't appear anywhere in my /etc/asterisk directory where the config files are kept. I think they are screwed up somehow, but I wanted to see if anyone can see anything obviously wrong with what I am doing here, because unless I can find something wrong with my Asterisk configuration, I am probably going to have to change providers and port my number again (I just moved from a POTS provider Century Link to a VOIP provider).


Thank you,
--Greg

[darcy at Vex.Net]

On Thu, 18 Jun 2015 11:27:08 -0600
Greg Woods <greg@gregandeva.net> wrote:

[kenner at gnat.com]

[support at drdos.info]

[darcy at Vex.Net]

On Thu, 18 Jun 2015 13:45:10 EDT
kenner@gnat.com (Richard Kenner) wrote:

[support at drdos.info]

[kujensen at gmail.com]

Set(CALLERID(number)=XXXXXXXXXX) works here.

Also check with your VoIP provider what format they want for the number. (I believe) most accept a  10-digit number, but I seem to remember reading about the odd provider that wanted a leading "1".


On Thu, Jun 18, 2015 at 11:47 AM, D'Arcy J.M. Cain <darcy@vex.net (darcy@vex.net)> wrote:

[mark.wiater at greybea...]

On 6/18/2015 1:27 PM, Greg Woods wrote:

[greg at gregandeva.net]

Thanks very much for all the responses. I now have a few more things to try.

I should have noted that I am using IAX2 rather than SIP to connect to my provider.  I do have some internal phones that use SIP to connect to my asterisk box, as well as some corded phones connected through a Digium DAHDI-driven card.


I am certain that the old number that is showing up as my caller ID is not present in any of my config files (that includes sip.conf and iax.conf, everything in the /etc/asterisk directory has been checked). 


A few things I will try tonight when I get home:

1) Turning on iax debugging (don't know why I didn't think of that)
2) Setting callerid= in the outbound dialing context in iax.conf
3) Trying a leading "1" on the number I use in the Set(CALLERID(num) call.


Since this is a thread that someone down the road is sure to stumble across, I will post results whether or not I am successful.


--Greg

[darcy at Vex.Net]

On Thu, 18 Jun 2015 11:58:34 -0600
Kai-Uwe Jensen <kujensen@gmail.com> wrote:

[lists at venturevoip.com]

[greg at gregandeva.net]

On Thu, Jun 18, 2015 at 1:26 PM, Matt Riddell <lists@venturevoip.com (lists@venturevoip.com)> wrote:

[lists at venturevoip.com]

[johng at motorolasolut...]

You may need to set this up with the web portal of your ITSP. My provider allows both caller ID to be passed in via SIP or alternatively to have a pre-provisioned caller ID to be applied to all calls.

John


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[asterisk.org at sedwar...]

On Thu, 18 Jun 2015, Matt Riddell wrote: