VoIP Mailing List Archives

[billk at iinet.net.au]

sipura 3102 set to bridge. Works but I find that when rebooting a PC
bridged it sometimes (randomly) doesnt get a dhcp lease, necessitating a
powercycle of the 3102. I think the PC drops the ethernet as it reb
oots and the sipura doesnt recognise it coming back.

BillK
On Thu, 2008-03-13 at 19:59 -1000, Thermal Wetland wrote:

[joakimsen at gmail.com]

Linksys SPA2102 does. It even has the option to auto-detect so if it
is assigned an RFC1819 address it will act as a switch and otherwise
just as a NAT router.

So does Grandstream HT496 (and I'm sure others) but it must be
manually configured.

On Fri, Mar 14, 2008 at 1:59 AM, Thermal Wetland
<thermalwetland at gmail.com> wrote:

[jra at baylink.com]

On Fri, Mar 14, 2008 at 02:32:54AM -0400, Andreas van dem Helge wrote:

[joakimsen at gmail.com]

I know about them... KCL.net in Miami does (did?) the same assigning
10.x address for basic home connections...

What's your point? It's configurable on the 2102 as
switch/nat/autodetect, ht496 as nat/switch. If you have such ISP and
want to use the device as a router just manually set the NAT option.

On Fri, Mar 14, 2008 at 11:47 AM, Jay R. Ashworth <jra at baylink.com> wrote:

[jra at baylink.com]

On Fri, Mar 14, 2008 at 12:10:21PM -0400, Andreas van dem Helge wrote:

[billk at iinet.net.au]

its not a bad device - I have 2 problems with it. It doesn't do echo cancellation very well & is particularly badly matched to the PSTN here in Oz. Hint: keep it well cooled - echo goes up badly when its hot& it runs very hot if there is no ventilation. I use the 3102 to bridge a mythtv box instead of putting in an extra switch - works except for the occaisional failure to get a dhcp address. I use a linux gateway for dhcp, most devices (3102+mythtv box, lynksys PAP2, bt100 ip phones, wireless and hosts) are all dhcp

-----Original Message-----

From: "Thermal Wetland" <thermalwetland at gmail.com>
Subj: Re: [asterisk-users] Anyone know of a pass through ATA
Date: Sat 15 Mar 2008 10:23
Size: 2K
To: billk at iinet.net.au, "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>

That is awesome. I dont know why the manual doesnt mention that.

I want to have the device use a static IP & the computer use DCHP from a central DHCP server...sounds like it wont be a problem.

Thanks.

On Thu, Mar 13, 2008 at 8:14 PM, W.Kenworthy <billk at iinet.net.au> wrote:
sipura 3102 set to bridge. Works but I find that when rebooting a PC
bridged it sometimes (randomly) doesnt get a dhcp lease, necessitating a
powercycle of the 3102. I think the PC drops the ethernet as it reb
oots and the sipura doesnt recognise it coming back.

BillK



On Thu, 2008-03-13 at 19:59 -1000, Thermal Wetland wrote:

[joakimsen at gmail.com]

SPA1001 is 1FXS only. SPA3102 is 1FXS + 1FXO... if you don't need FXO
why not get the SPA2102? It should be cheaper and you have the extra
port for future use.

On Sat, Mar 15, 2008 at 12:08 AM, Thermal Wetland
<thermalwetland at gmail.com> wrote: