VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
broadbandvoice at gmai...
Guest
|
 Posted: Fri Mar 14, 2008 7:13 pm Post subject: [asterisk-users] DID T1 PRI |
 |
|
I had Cavalier turn up a T1 PRI. How can I put in the DIDs to direct to
Asterisk. Here is a log
Zaptel Tool (C)2002 Linux Support Services, Inc.
?????????????????? T2XXP (PCI) Card 0 Span 1
??????????????????[3;10H?terfaces ?????????????????
?????[3;37H? ? ?
?
? ?
? Current Alarms: No alarms. ? rd 0
Span 1 ? ?
? Sync Source: T2XXP (PCI) Card 0 Span 1 ? rd 0
Span 2 ?(R) ?
? IRQ Misses: 0
? ? ?
? Bipolar Viol: 0
? ? ?
? Tx/Rx Levels: 0/ 0
? ?(R) ?
? Total/Conf/Act: 24/ 24/ 0
? ? ?
? 111111111122222 ????????
? ? ?
? 123456789012345678901234 ? Back ?
? ? ?
? TxA ------------------------ ????????
? ? ?
? TxB ------------------------
? ? ?
? TxC ------------------------
? ?
? TxD ------------------------
? ?
? ???????? ?14C?
? RxA ------------------------ ? Loop ?
? ? Quit ? ?
? RxB ------------------------ ????????
? ???????? ?
? RxC ------------------------
? ?
? RxD ------------------------ ?
??????????????????????????????????????
? ?
??????????????????????????????????????????????????????????????
T2XXP (PCI) Card 0 Span 1
F10=Back
I need to add 215-xxx-xxxx etc to come in to the Asterisk box.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080314/6c8aee54/attachment.htm |
|
| Back to top |
|
 |
stotaro at totarotechn...
Guest
|
| Posted: Fri Mar 14, 2008 7:53 pm Post subject: [asterisk-users] DID T1 PRI |
|
|
On Fri, Mar 14, 2008 at 8:13 PM, broadband Voice
<broadbandvoice at gmail.com> wrote:
| Quote: | I had Cavalier turn up a T1 PRI. How can I put in the DIDs to direct to
Asterisk. Here is a log
Zaptel Tool (C)2002 Linux Support Services, Inc.
?????????????????? T2XXP (PCI) Card 0 Span 1
??????????????????[3;10H?terfaces ????????????????? ?????[3;37H?
? ?
? ?
?
? Current Alarms: No alarms. ? rd 0
Span 1 ? ?
? Sync Source: T2XXP (PCI) Card 0 Span 1 ? rd
0 Span 2 ?(R) ?
? IRQ Misses: 0 ?
? ?
? Bipolar Viol: 0 ?
? ?
? Tx/Rx Levels: 0/ 0 ?
?(R) ?
? Total/Conf/Act: 24/ 24/ 0 ?
? ?
? 111111111122222 ???????? ?
? ?
? 123456789012345678901234 ? Back ? ?
? ?
? TxA ------------------------ ???????? ?
? ?
? TxB ------------------------ ?
? ?
? TxC ------------------------ ?
?
? TxD ------------------------ ?
?
? ???????? ?14C?
? RxA ------------------------ ? Loop ? ?
? Quit ? ?
? RxB ------------------------ ???????? ?
???????? ?
? RxC ------------------------ ?
?
? RxD ------------------------ ?
??????????????????????????????????????
? ?
??????????????????????????????????????????????????????????????
T2XXP (PCI) Card 0 Span 1
F10=Back
I need to add 215-xxx-xxxx etc to come in to the Asterisk box.
|
Do you have DIDs already? When you call a DID and watch the Asterisk
console with a little verbose, you should see the call come and how
many digits the telco is sending.
Then you need to make matching entries for those DIDs either in the
form of exact matches or pattern matches to do pretty much whatever
you can imagine.
Are you in Philly?
Thanks,
Steve Totaro |
|
| Back to top |
|
|
dwright at d2-tech.com
Guest
|
| Posted: Fri Mar 14, 2008 11:01 pm Post subject: [asterisk-users] DID T1 PRI |
|
|
Feel free to ping me off list. I've setup quite a few Cavtel PRI's with *.the paperwork they asked you to setup?
Typically, they only send 4 digits.
Do you have the questionnare they asked you to fill out?
dwright at d2 - tech dot com.
________________________________
From: asterisk-users-bounces at lists.digium.com on behalf of broadband Voice
Sent: Fri 3/14/2008 9:04 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DID T1 PRI
Thanks. I am in Philly. I may have to configure the extensions.conf well to pass the incoming channels.
On 3/14/08, Steve Totaro <stotaro at totarotechnologies.com> wrote:
On Fri, Mar 14, 2008 at 8:13 PM, broadband Voice
<broadbandvoice at gmail.com> wrote:
> I had Cavalier turn up a T1 PRI. How can I put in the DIDs to direct to
> Asterisk. Here is a log
>
>
>
> Zaptel Tool (C)2002 Linux Support Services, Inc.
> ?????????????????? T2XXP (PCI) Card 0 Span 1
> ??????????????????[3;10H?terfaces ????????????????? ?????[3;37H?
> ? ?
>
> ? ?
> ?
> ? Current Alarms: No alarms. ? rd 0
> Span 1 ? ?
> ? Sync Source: T2XXP (PCI) Card 0 Span 1 ? rd
> 0 Span 2 ?(R) ?
> ? IRQ Misses: 0 ?
> ? ?
> ? Bipolar Viol: 0 ?
> ? ?
> ? Tx/Rx Levels: 0/ 0 ?
> ?(R) ?
> ? Total/Conf/Act: 24/ 24/ 0 ?
> ? ?
> ? 111111111122222 ???????? ?
> ? ?
> ? 123456789012345678901234 ? Back ? ?
> ? ?
> ? TxA ------------------------ ???????? ?
> ? ?
> ? TxB ------------------------ ?
> ? ?
> ? TxC ------------------------ ?
> ?
> ? TxD ------------------------ ?
> ?
> ? ???????? ?14C?
> ? RxA ------------------------ ? Loop ? ?
> ? Quit ? ?
> ? RxB ------------------------ ???????? ?
> ???????? ?
> ? RxC ------------------------ ?
> ?
> ? RxD ------------------------ ?
> ??????????????????????????????????????
> ? ?
> ??????????????????????????????????????????????????????????????
>
> T2XXP (PCI) Card 0 Span 1
> F10=Back
>
>
> I need to add 215-xxx-xxxx etc to come in to the Asterisk box.
>
>
Do you have DIDs already? When you call a DID and watch the Asterisk
console with a little verbose, you should see the call come and how
many digits the telco is sending.
Then you need to make matching entries for those DIDs either in the
form of exact matches or pattern matches to do pretty much whatever
you can imagine.
Are you in Philly?
Thanks,
Steve Totaro
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com <http://www.api-digital.com/> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This message was sent from D2 Technology, INC. |
|
| Back to top |
|
|
broadbandvoice at gmai...
Guest
|
| Posted: Sat Mar 15, 2008 5:33 am Post subject: [asterisk-users] DID T1 PRI |
|
|
Can you share with me sample extensions.conf? This is what I have
exten => 215xxxxxxx,1,Dial(Zap/1)
in zapata.conf
[channels]
context=external
switchtype=ni1
resetinterval=3600
overlapdial=no
priindication=outofband
facilityenable=yes
signalling=pri_cpe
usecallerid=yes
cidsignalling=bell
hidecallerid=no
restrictcid=no
usecallingpres=yes
echocancel=yes
callerid=asreceived
faxdetect=incoming
nsf=sdn
group=1
channel=>1-23
zaptel.conf
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
On 3/15/08, Darren Wright <dwright at d2-tech.com> wrote:
| Quote: |
Feel free to ping me off list. I've setup quite a few Cavtel PRI's with
*.the paperwork they asked you to setup?
Typically, they only send 4 digits.
Do you have the questionnare they asked you to fill out?
dwright at d2 - tech dot com.
________________________________
From: asterisk-users-bounces at lists.digium.com on behalf of broadband Voice
Sent: Fri 3/14/2008 9:04 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DID T1 PRI
Thanks. I am in Philly. I may have to configure the extensions.conf well
to pass the incoming channels.
On 3/14/08, Steve Totaro <stotaro at totarotechnologies.com> wrote:
On Fri, Mar 14, 2008 at 8:13 PM, broadband Voice
<broadbandvoice at gmail.com> wrote:
| Quote: | I had Cavalier turn up a T1 PRI. How can I put in the DIDs to
|
direct to
| Quote: | Asterisk. Here is a log
Zaptel Tool (C)2002 Linux Support Services, Inc.
?????????????????? T2XXP (PCI) Card 0 Span 1
??????????????????[3;10H?terfaces ????????????????? ?????[3;37H?
? ?
|
| Quote: | ? ?
?
? Current Alarms: No
|
alarms. ? rd 0
| Quote: | Span 1 ? ?
? Sync Source: T2XXP (PCI) Card 0 Span
|
1 ? rd
| Quote: | 0 Span 2 ?(R) ?
? IRQ Misses:
|
0 ?
| Quote: | ? ?
? Bipolar Viol:
|
0 ?
| Quote: | ? ?
? Tx/Rx Levels:
|
0/ 0 ?
| Quote: | ?(R) ?
? Total/Conf/Act: 24/
|
24/ 0 ?
111111111122222 ???????? ?
| Quote: | ? ?
? 123456789012345678901234 ? Back
|
? ?
------------------------ ???????? ?
------------------------ ?
------------------------ ?
------------------------ ?
| Quote: | ? ???????? ?14C?
? RxA ------------------------ ? Loop
|
? ?
------------------------ ???????? ?
------------------------ ?
------------------------ ?
| Quote: | ??????????????????????????????????????
|
| Quote: | ??????????????????????????????????????????????????????????????
T2XXP (PCI) Card 0 Span 1
F10=Back
I need to add 215-xxx-xxxx etc to come in to the Asterisk box.
|
Do you have DIDs already? When you call a DID and watch the
Asterisk
console with a little verbose, you should see the call come and how
many digits the telco is sending.
Then you need to make matching entries for those DIDs either in the
form of exact matches or pattern matches to do pretty much whatever
you can imagine.
Are you in Philly?
Thanks,
Steve Totaro
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com<
http://www.api-digital.com/> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This message was sent from D2 Technology, INC.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080315/b2bda2fe/attachment-0001.htm |
|
| Back to top |
|
|
broadbandvoice at gmai...
Guest
|
| Posted: Sat Mar 15, 2008 12:34 pm Post subject: [asterisk-users] DID T1 PRI |
|
|
Additional output
[root at localhost ~]# /sbin/ztcfg -vv
Zaptel Version: 1.4.9
Echo Canceller: MG2
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 0
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: Clear channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 1
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: D-channel (Default) (Slaves: 24)
24 channels to configure.
On 3/15/08, broadband Voice <broadbandvoice at gmail.com> wrote:
| Quote: |
Can you share with me sample extensions.conf? This is what I have
exten => 215xxxxxxx,1,Dial(Zap/1)
in zapata.conf
[channels]
context=external
switchtype=ni1
resetinterval=3600
overlapdial=no
priindication=outofband
facilityenable=yes
signalling=pri_cpe
usecallerid=yes
cidsignalling=bell
hidecallerid=no
restrictcid=no
usecallingpres=yes
echocancel=yes
callerid=asreceived
faxdetect=incoming
nsf=sdn
group=1
channel=>1-23
zaptel.conf
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
On 3/15/08, Darren Wright <dwright at d2-tech.com> wrote:
| Quote: |
Feel free to ping me off list. I've setup quite a few Cavtel PRI's with
*.the paperwork they asked you to setup?
Typically, they only send 4 digits.
Do you have the questionnare they asked you to fill out?
dwright at d2 - tech dot com.
________________________________
From: asterisk-users-bounces at lists.digium.com on behalf of broadband
Voice
Sent: Fri 3/14/2008 9:04 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DID T1 PRI
Thanks. I am in Philly. I may have to configure the extensions.conf well
to pass the incoming channels.
On 3/14/08, Steve Totaro <stotaro at totarotechnologies.com> wrote:
On Fri, Mar 14, 2008 at 8:13 PM, broadband Voice
<broadbandvoice at gmail.com> wrote:
| Quote: | I had Cavalier turn up a T1 PRI. How can I put in the DIDs to
|
direct to
| Quote: | Asterisk. Here is a log
Zaptel Tool (C)2002 Linux Support Services, Inc.
?????????????????? T2XXP (PCI) Card 0 Span 1
??????????????????[3;10H?terfaces ?????????????????
|
?????[3;37H?
| Quote: | ? ?
?
? Current Alarms: No
|
alarms. ? rd 0
| Quote: | Span 1 ? ?
? Sync Source: T2XXP (PCI) Card 0 Span
|
1 ? rd
| Quote: | 0 Span 2 ?(R) ?
? IRQ Misses:
|
0 ?
| Quote: | ? ?
? Bipolar Viol:
|
0 ?
| Quote: | ? ?
? Tx/Rx Levels:
|
0/ 0 ?
| Quote: | ?(R) ?
? Total/Conf/Act: 24/
|
24/ 0 ?
111111111122222 ???????? ?
| Quote: | ? ?
? 123456789012345678901234 ?
|
Back ? ?
------------------------ ???????? ?
------------------------ ?
------------------------ ?
------------------------ ?
| Quote: | ? ???????? ?14C?
? RxA ------------------------ ?
|
Loop ? ?
------------------------ ???????? ?
------------------------ ?
------------------------ ?
| Quote: | ??????????????????????????????????????
|
| Quote: | ??????????????????????????????????????????????????????????????
T2XXP (PCI) Card 0 Span 1
F10=Back
I need to add 215-xxx-xxxx etc to come in to the Asterisk box.
|
Do you have DIDs already? When you call a DID and watch the
Asterisk
console with a little verbose, you should see the call come and
how
many digits the telco is sending.
Then you need to make matching entries for those DIDs either in
the
form of exact matches or pattern matches to do pretty much
whatever
you can imagine.
Are you in Philly?
Thanks,
Steve Totaro
_______________________________________________
-- Bandwidth and Colocation Provided by
http://www.api-digital.com <http://www.api-digital.com/> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This message was sent from D2 Technology, INC.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080315/d506fd61/attachment.htm |
|
| Back to top |
|
|
dwright at d2-tech.com
Guest
|
| Posted: Sat Mar 15, 2008 8:22 pm Post subject: [asterisk-users] DID T1 PRI |
|
|
That's not going to tell you anything about the digits in transit. That's just telling you that your PRI is up.
you are going to need exten => 4DIGITS
________________________________
From: asterisk-users-bounces at lists.digium.com on behalf of broadband Voice
Sent: Sat 3/15/2008 1:34 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DID T1 PRI
Additional output
[root at localhost ~]# /sbin/ztcfg -vv
Zaptel Version: 1.4.9
Echo Canceller: MG2
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 0
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: Clear channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 1
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: D-channel (Default) (Slaves: 24)
24 channels to configure.
On 3/15/08, broadband Voice <broadbandvoice at gmail.com> wrote:
Can you share with me sample extensions.conf? This is what I have
exten => 215xxxxxxx,1,Dial(Zap/1)
in zapata.conf
[channels]
context=external
switchtype=ni1
resetinterval=3600
overlapdial=no
priindication=outofband
facilityenable=yes
signalling=pri_cpe
usecallerid=yes
cidsignalling=bell
hidecallerid=no
restrictcid=no
usecallingpres=yes
echocancel=yes
callerid=asreceived
faxdetect=incoming
nsf=sdn
group=1
channel=>1-23
zaptel.conf
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
On 3/15/08, Darren Wright <dwright at d2-tech.com> wrote:
Feel free to ping me off list. I've setup quite a few Cavtel PRI's with *.the paperwork they asked you to setup?
Typically, they only send 4 digits.
Do you have the questionnare they asked you to fill out?
dwright at d2 - tech dot com.
________________________________
From: asterisk-users-bounces at lists.digium.com on behalf of broadband Voice
Sent: Fri 3/14/2008 9:04 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DID T1 PRI
Thanks. I am in Philly. I may have to configure the extensions.conf well to pass the incoming channels.
On 3/14/08, Steve Totaro <stotaro at totarotechnologies.com> wrote:
On Fri, Mar 14, 2008 at 8:13 PM, broadband Voice
<broadbandvoice at gmail.com> wrote:
> I had Cavalier turn up a T1 PRI. How can I put in the DIDs to direct to
> Asterisk. Here is a log
>
>
>
> Zaptel Tool (C)2002 Linux Support Services, Inc.
> ?????????????????? T2XXP (PCI) Card 0 Span 1
> ??????????????????[3;10H?terfaces ????????????????? ?????[3;37H?
> ? ?
>
> ? ?
> ?
> ? Current Alarms: No alarms. ? rd 0
> Span 1 ? ?
> ? Sync Source: T2XXP (PCI) Card 0 Span 1 ? rd
> 0 Span 2 ?(R) ?
> ? IRQ Misses: 0 ?
> ? ?
> ? Bipolar Viol: 0 ?
> ? ?
> ? Tx/Rx Levels: 0/ 0 ?
> ?(R) ?
> ? Total/Conf/Act: 24/ 24/ 0 ?
> ? ?
> ? 111111111122222 ???????? ?
> ? ?
> ? 123456789012345678901234 ? Back ? ?
> ? ?
> ? TxA ------------------------ ???????? ?
> ? ?
> ? TxB ------------------------ ?
> ? ?
> ? TxC ------------------------ ?
> ?
> ? TxD ------------------------ ?
> ?
> ? ???????? ?14C?
> ? RxA ------------------------ ? Loop ? ?
> ? Quit ? ?
> ? RxB ------------------------ ???????? ?
> ???????? ?
> ? RxC ------------------------ ?
> ?
> ? RxD ------------------------ ?
> ??????????????????????????????????????
> ? ?
> ??????????????????????????????????????????????????????????????
>
> T2XXP (PCI) Card 0 Span 1
> F10=Back
>
>
> I need to add 215-xxx-xxxx etc to come in to the Asterisk box.
>
>
Do you have DIDs already? When you call a DID and watch the Asterisk
console with a little verbose, you should see the call come and how
many digits the telco is sending.
Then you need to make matching entries for those DIDs either in the
form of exact matches or pattern matches to do pretty much whatever
you can imagine.
Are you in Philly?
Thanks,
Steve Totaro
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com <http://www.api-digital.com/> <http://www.api-digital.com/> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This message was sent from D2 Technology, INC.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com <http://www.api-digital.com/> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This message was sent from D2 Technology, INC.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 17628 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20080315/56cab520/attachment.bin |
|
| Back to top |
|
|
rjoffe at yahoo.com
Guest
|
| Posted: Sat Mar 15, 2008 10:32 pm Post subject: [asterisk-users] DID T1 PRI |
|
|
On Saturday 15 March 2008 21:22, Darren Wright wrote:
| Quote: | That's not going to tell you anything about the digits in transit. That's
just telling you that your PRI is up.
you are going to need exten => 4DIGITS
|
How about trying this out:
exten => _X.,1,NoOp
exten => _X.,n,SOMETHING
exten => _X.,n,Hangup
That should capture just about anything that is all digits.
Ron |
|
| Back to top |
|
|
rjoffe at yahoo.com
Guest
|
| Posted: Sun Mar 16, 2008 9:02 am Post subject: [asterisk-users] DID T1 PRI |
|
|
On Sunday 16 March 2008 08:09, broadband Voice wrote:
| Quote: | Cavalier did not leave me any paperwork to sign. I check with the colo as
well and they did not receive anything. I have a feeling I have not defined
my trunk groups well in zaptel.conf.
|
Your zapata.conf looks ok.
Try this for your zaptel.conf
[channels]
language=en
group=1
callgroup=1
pickupgroup=1
context=external
switchtype=national
pridialplan=unknown
signalling=pri_cpe
group=1
channel => 1-23
relaxdtmf=yes
dtmfmode=rfc2833
Then a simple way to log everything is to run the command script. This will
create a file called typescript.
Then run asterisk -vvvvvvvcTn.
Then make a call inbound over the PRI.
Then exit asterisk with "stop now".
then exit script with "exit".
You should now have a typescript file with all of your asterisk session.
let's see what you get.
Ron |
|
| Back to top |
|
|
broadbandvoice at gmai...
Guest
|
| Posted: Sun Mar 16, 2008 5:19 pm Post subject: [asterisk-users] DID T1 PRI |
|
|
I tried that and got 14 errors, see below:
[root at localhost etc]# service zaptel restart
Unloading zaptel hardware drivers:ERROR: Module zaptel is in use
.
Loading zaptel framework: [ OK ]
Waiting for zap to come online...OK
Loading zaptel hardware modules: tor2.
wct4xxp.
wcte12xp.
wct1xxp.
wcte11xp.
wctdm24xxp.
wcfxo.
wctdm.
wcusb.
xpp_usb.
Running ztcfg: Notice: Configuration file is /etc/zaptel.conf
line 236: Syntax error. Should be <keyword>=<value>
line 236: Unknown keyword '[channels]'
line 237: Unknown keyword 'language'
line 238: Unknown keyword 'group'
line 239: Unknown keyword 'callgroup'
line 240: Unknown keyword 'pickupgroup'
line 242: Unknown keyword 'context'
line 243: Unknown keyword 'switchtype'
line 244: Unknown keyword 'pridialplan'
line 245: Unknown keyword 'signalling'
line 247: Unknown keyword 'group'
line 248: Syntax error. Start of range '> 1-23' should be a number from 1
to 1023
line 250: Unknown keyword 'relaxdtmf'
line 251: Unknown keyword 'dtmfmode'
14 error(s) detected
On 3/16/08, Ron Joffe <rjoffe at yahoo.com> wrote:
| Quote: |
On Sunday 16 March 2008 08:09, broadband Voice wrote:
| Quote: | Cavalier did not leave me any paperwork to sign. I check with the colo
|
as
| Quote: | well and they did not receive anything. I have a feeling I have not
|
defined
| Quote: | my trunk groups well in zaptel.conf.
|
Your zapata.conf looks ok.
Try this for your zaptel.conf
[channels]
language=en
group=1
callgroup=1
pickupgroup=1
context=external
switchtype=national
pridialplan=unknown
signalling=pri_cpe
group=1
channel => 1-23
relaxdtmf=yes
dtmfmode=rfc2833
Then a simple way to log everything is to run the command script. This
will
create a file called typescript.
Then run asterisk -vvvvvvvcTn.
Then make a call inbound over the PRI.
Then exit asterisk with "stop now".
then exit script with "exit".
You should now have a typescript file with all of your asterisk session.
let's see what you get.
Ron
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080316/a7d7d38b/attachment.htm |
|
| Back to top |
|
|
rjoffe at yahoo.com
Guest
|
| Posted: Sun Mar 16, 2008 7:06 pm Post subject: [asterisk-users] DID T1 PRI |
|
|
On Sunday 16 March 2008 18:19, broadband Voice wrote:
| Quote: | I tried that and got 14 errors, see below:
|
Sorry, switch those around, I gave you a zapata.conf, your original
zaptel.conf looks fine.
Ron |
|
| Back to top |
|
|
tzafrir.cohen at xorco...
Guest
|
| Posted: Mon Mar 17, 2008 3:30 am Post subject: [asterisk-users] DID T1 PRI |
|
|
On Sun, Mar 16, 2008 at 06:19:04PM -0400, broadband Voice wrote:
| Quote: | Running ztcfg: Notice: Configuration file is /etc/zaptel.conf
line 236: Syntax error. Should be <keyword>=<value>
line 236: Unknown keyword '[channels]'
line 237: Unknown keyword 'language'
|
[snip]
| Quote: | line 248: Syntax error. Start of range '> 1-23' should be a number from 1
to 1023
|
'channel' Is actually a valid keyword in zaptel.conf 
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.cohen at xorcom.com
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
