Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] תשובה: Dialing a call back out on same SIP trunk as it came in


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
isrlgb at gmail.com
Guest





PostPosted: Wed Nov 25, 2015 8:30 am    Post subject: [asterisk-users] תשובה: Dialing a call back out on sam Reply with quote

Try putting progress instead of answer


  הודעה מקורית  
מאת: Tony Mountifield
נשלח: יום רביעי, 25 בנובמבר 2015 08:14
אל: asterisk-users@lists.digium.com
השב ל: Asterisk Users Mailing List - Non-Commercial Discussion
נושא: [asterisk-users] Dialing a call back out on same SIP trunk as it came in

I have a puzzling situation, and would be grateful for any insight.

I have a dialplan that forwards an incoming call out to another
number via the same SIP trunk as it came in on. e.g.

[from-siptrunk]
exten => 0123456789,1,NoOp
exten => 0123456789,n,Dial(SIP/siptrunk/0987654321)

Now, if I use a different SIP trunk for the outbound call, than the
inbound call came on, the call is set up fine - the Answer signal from the
called party gets propagated back to the caller, and they can hear each
other.

But if the outbound SIP trunk is the same as the one the call came in on,
the caller doesn't hear any progress, and has no notification of when the
call was answered. Neither can the parties hear each other.

I have tried this on two different machines using two different SIP
providers.

However, if I change the above NoOp to be Answer(100), i.e. answer the
inbound call before placing the outbound Dial, the caller hears progress
and when the called party answers, they hear each other fine.

Of course, if the called party is busy, the caller just hears in-band
busy tone, as the caller's inbound call was already answered.

Can anyone explain why I need the Answer? It feels wrong that I should.

The siptrunk entry contains canreinvite=no and directmedia=no.

The version of Asterisk on these boxes is 10.5.1, if that's relevant.

Thanks for any insight!

Cheers
Tony

--
Tony Mountifield
Work: tony@softins.co.uk - http://www.softins.co.uk
Play: tony@mountifield.org - http://tony.mountifield.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services