VoIP Mailing List Archives :: View topic - [asterisk-users] Detected alarm on channel 3: Red Alarm

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[asterisk-users] Detected alarm on channel 3: Red Alarm

VoIP Mailing List Archives Forum Index -> Asterisk Users

View previous topic :: View next topic

Author

Message

vitor.mazuco at gmail.com
Guest

Posted: Tue Jan 05, 2016 9:21 am Post subject: [asterisk-users] Detected alarm on channel 3: Red Alarm

Hi everyone! I have a Digium Card TDM410 But, it appear for me this massege chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm But my line is ok! But sometimes it back sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2 But it again back to red alarm. What can be happen? My lines is all ok! But when I put on Digium Card TDM410 is very inconsistent Thanks -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

RyanT at OscarWinski.com
Guest

Posted: Tue Jan 05, 2016 9:38 am Post subject: [asterisk-users] Detected alarm on channel 3: Red Alarm

Quote:

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-
bounces@lists.digium.com] On Behalf Of Vitor Mazuco
Sent: Tuesday, January 05, 2016 9:21 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Detected alarm on channel 3: Red Alarm

Hi everyone!

I have a Digium Card TDM410

But, it appear for me this massege

chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm

But my line is ok!

But sometimes it back

sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2

But it again back to red alarm.

What can be happen?

My lines is all ok! But when I put on Digium Card TDM410 is very
inconsistent

Thanks

--

Honestly, I've only had red alarms on any of my cards if there was a problem with the lines or service over those lines. Maybe someone else could speak to other reasons the red light might appear.

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

vitor.mazuco at gmail.com
Guest

Posted: Tue Jan 05, 2016 9:42 am Post subject: [asterisk-users] Detected alarm on channel 3: Red Alarm

Humm, if I put a filter in this lines, maybe back?

2016-01-05 12:36 GMT-02:00, Ryan, Travis <RyanT@oscarwinski.com>:

Quote:

Honestly, I've only had red alarms on any of my cards if there was a problem
with the lines or service over those lines. Maybe someone else could speak
to other reasons the red light might appear.

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

RyanT at OscarWinski.com
Guest

Posted: Tue Jan 05, 2016 9:46 am Post subject: [asterisk-users] Detected alarm on channel 3: Red Alarm

Quote:

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-

users-

Quote:

bounces@lists.digium.com] On Behalf Of Vitor Mazuco
Sent: Tuesday, January 05, 2016 9:21 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Detected alarm on channel 3: Red Alarm

Hi everyone!

I have a Digium Card TDM410

But, it appear for me this massege

chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red
Alarm

But my line is ok!

But sometimes it back

sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel
2

But it again back to red alarm.

What can be happen?

My lines is all ok! But when I put on Digium Card TDM410 is very
inconsistent

Thanks

--

Honestly, I've only had red alarms on any of my cards if there was a
problem with the lines or service over those lines. Maybe someone

else

Quote:

could speak to other reasons the red light might appear.

--

[Ryan, Travis] Is your line pretty long? Maybe the distance is far so the signal is weak?

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

vitor.mazuco at gmail.com
Guest

Posted: Tue Jan 05, 2016 9:58 am Post subject: [asterisk-users] Detected alarm on channel 3: Red Alarm

My line is comming from a monden ADSL that it provide internet too.

2016-01-05 12:46 GMT-02:00, Ryan, Travis <RyanT@oscarwinski.com>:

Quote:

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-

users-

Quote:

Honestly, I've only had red alarms on any of my cards if there was a
problem with the lines or service over those lines. Maybe someone

else

Quote:

could speak to other reasons the red light might appear.

--

[Ryan, Travis] Is your line pretty long? Maybe the distance is far so the
signal is weak?

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

sruffell at digium.com
Guest

Posted: Tue Jan 05, 2016 10:24 am Post subject: [asterisk-users] Detected alarm on channel 3: Red Alarm

On Tue, Jan 05, 2016 at 02:36:42PM +0000, Ryan, Travis wrote:

Quote:

Honestly, I've only had red alarms on any of my cards if there was
a problem with the lines or service over those lines. Maybe
someone else could speak to other reasons the red light might
appear.

The red alarm on the analog cards, like the TDM410, appear when the
card does not detect a sufficient battery voltage from the central
office.

Typically this will happen when the cable is disconnected from the
card, there is something flaky in the connection with the central
office, a filter is causing a voltage drop, etc..

One thing to check is that the 'opermode' module parameter is set
for the country that you're in, if you're not in the United States
or Canada.

--
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

vitor.mazuco at gmail.com
Guest

Posted: Tue Jan 05, 2016 10:29 am Post subject: [asterisk-users] Detected alarm on channel 3: Red Alarm

Oh, thanks very much Shaun,
I'm from Brazil
And about the voltage, how can I fix this red alarm? Em 05/01/2016 13:23, "Shaun Ruffell" <sruffell@digium.com (sruffell@digium.com)> escreveu:

Quote:

On Tue, Jan 05, 2016 at 02:36:42PM +0000, Ryan, Travis wrote:

Quote:

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com (asterisk-users-bounces@lists.digium.com) [mailto:asterisk-users- ([email]asterisk-users-[/email])
bounces@lists.digium.com (bounces@lists.digium.com)] On Behalf Of Vitor Mazuco
Sent: Tuesday, January 05, 2016 9:21 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Detected alarm on channel 3: Red Alarm

Hi everyone!

I have a Digium Card TDM410

But, it appear for me this massege

chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm

But my line is ok!

But sometimes it back

sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2

But it again back to red alarm.

What can be happen?

My lines is all ok! But when I put on Digium Card TDM410 is very
inconsistent

Thanks

Honestly, I've only had red alarms on any of my cards if there was
a problem with the lines or service over those lines. Maybe
someone else could speak to other reasons the red light might
appear.

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> Asterisk Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum