Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] Asterisk PJSIP Multi-tenant


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
annusfictus at gmail.com
Guest





PostPosted: Sun May 15, 2016 1:01 pm    Post subject: [asterisk-users] Asterisk PJSIP Multi-tenant Reply with quote

Hello List,

following this thread:

http://asterisk-users.digium.narkive.com/ulR5hd1M/same-pjsip-username-with-differents-domains

I tried to configure on the pjsip.conf the same endpoint with different
domains like:

[1000@sip.domain.com]
type=endpoint

[1000@sip1.domain.com]
type=endpoint

I can register the two 1000 endpoints using different domain but on the
Asterisk console:

ERROR[1748]: res_pjsip.c:2946 create_out_of_dialog_request: Unable to
create outbound OPTIONS request to endpoint 1000@sip.domain.com

ERROR[1748]: res_pjsip/pjsip_options.c:350 qualify_contact: Unable to
create request to qualify contact
sip:1000@95.250.29.3:53570;rinstance=d90827763e4353c0

in the aor section I'm using:

qualify_frequency=30

Any hint?

Regards


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
gjoseph at digium.com
Guest





PostPosted: Sun May 15, 2016 7:52 pm    Post subject: [asterisk-users] Asterisk PJSIP Multi-tenant Reply with quote

On Sun, May 15, 2016 at 12:00 PM, Annus Fictus <annusfictus@gmail.com (annusfictus@gmail.com)> wrote:
Quote:
Hello List,

following this thread:

http://asterisk-users.digium.narkive.com/ulR5hd1M/same-pjsip-username-with-differents-domains

I tried to configure on the pjsip.conf the same endpoint with different domains like:

[1000@sip.domain.com (1000@sip.domain.com)]
type=endpoint

[1000@sip1.domain.com (1000@sip1.domain.com)]
type=endpoint

I can register the two 1000 endpoints using different domain but on the Asterisk console:

ERROR[1748]: res_pjsip.c:2946 create_out_of_dialog_request: Unable to create outbound OPTIONS request to endpoint 1000@sip.domain.com (1000@sip.domain.com)

ERROR[1748]: res_pjsip/pjsip_options.c:350 qualify_contact: Unable to create request to qualify contact sip:1000@95.250.29.3:53570;rinstance=d90827763e4353c0

in the aor section I'm using:

qualify_frequency=30


If you set qualify_frequency=0, can that endpoint make and receive calls?  Not suggesting this as a solution, just asking to narrow possibilities down.



 
Quote:

Any hint?

Regards


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users




--
George JosephDigium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org
Back to top
annusfictus at gmail.com
Guest





PostPosted: Sun May 15, 2016 11:17 pm    Post subject: [asterisk-users] Asterisk PJSIP Multi-tenant Reply with quote

Hello,
with qualify_frequency=0 I can't receive calls from others endpoints.
Other strange think is if I set mailboxes parameter on the console, when the endpoint registering, i can see:
ERROR[2208]: res_pjsip.c:2946 create_out_of_dialog_request: Unable to create outbound NOTIFY request to endpoint 1001@sip.domain.com (1001@sip.domain.com)
WARNING[2208]: res_pjsip_mwi.c:379 send_unsolicited_mwi_notify_to_contact: Unable to create unsolicited NOTIFY request to endpoint 1001@sip.domain.com (1001@sip.domain.com) URI [url=sip:1001@95.250.29.3:50673;rinstance=1af959e7c0059fc4]sip:1001@95.250.29.3:50673;rinstance=1af959e7c0059fc4[/url]
Regards
El 16/05/2016 a las 02:52, George Joseph escribió:

Quote:



On Sun, May 15, 2016 at 12:00 PM, Annus Fictus <annusfictus@gmail.com (annusfictus@gmail.com)> wrote:
Quote:
Hello List,

following this thread:

http://asterisk-users.digium.narkive.com/ulR5hd1M/same-pjsip-username-with-differents-domains

I tried to configure on the pjsip.conf the same endpoint with different domains like:

[1000@sip.domain.com (1000@sip.domain.com)]
type=endpoint

[1000@sip1.domain.com (1000@sip1.domain.com)]
type=endpoint

I can register the two 1000 endpoints using different domain but on the Asterisk console:

ERROR[1748]: res_pjsip.c:2946 create_out_of_dialog_request: Unable to create outbound OPTIONS request to endpoint 1000@sip.domain.com (1000@sip.domain.com)

ERROR[1748]: res_pjsip/pjsip_options.c:350 qualify_contact: Unable to create request to qualify contact sip:1000@95.250.29.3:53570;rinstance=d90827763e4353c0

in the aor section I'm using:

qualify_frequency=30


If you set qualify_frequency=0, can that endpoint make and receive calls?  Not suggesting this as a solution, just asking to narrow possibilities down.



 
Quote:

Any hint?

Regards


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users




--
George Joseph Digium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org








Back to top
gjoseph at digium.com
Guest





PostPosted: Mon May 16, 2016 7:41 am    Post subject: [asterisk-users] Asterisk PJSIP Multi-tenant Reply with quote

On Sun, May 15, 2016 at 10:17 PM, Annus Fictus <annusfictus@gmail.com (annusfictus@gmail.com)> wrote:
Quote:

Hello,
with qualify_frequency=0 I can't receive calls from others endpoints.
Other strange think is if I set mailboxes parameter on the console, when the endpoint registering, i can see:
ERROR[2208]: res_pjsip.c:2946 create_out_of_dialog_request: Unable to create outbound NOTIFY request to endpoint 1001@sip.domain.com (1001@sip.domain.com)
WARNING[2208]: res_pjsip_mwi.c:379 send_unsolicited_mwi_notify_to_contact: Unable to create unsolicited NOTIFY request to endpoint 1001@sip.domain.com (1001@sip.domain.com) URI sip:1001@95.250.29.3:50673;rinstance=1af959e7c0059fc4
Unsolicited NOTIFY and OPTIONS both use the out-of-dialog path so I'm guessing we have an issue there.  Open an issue at https://issues.asterisk.org






 
Quote:

Regards
El 16/05/2016 a las 02:52, George Joseph escribió:

Quote:



On Sun, May 15, 2016 at 12:00 PM, Annus Fictus <annusfictus@gmail.com (annusfictus@gmail.com)> wrote:
Quote:
Hello List,

following this thread:

http://asterisk-users.digium.narkive.com/ulR5hd1M/same-pjsip-username-with-differents-domains

I tried to configure on the pjsip.conf the same endpoint with different domains like:

[1000@sip.domain.com (1000@sip.domain.com)]
type=endpoint

[1000@sip1.domain.com (1000@sip1.domain.com)]
type=endpoint

I can register the two 1000 endpoints using different domain but on the Asterisk console:

ERROR[1748]: res_pjsip.c:2946 create_out_of_dialog_request: Unable to create outbound OPTIONS request to endpoint 1000@sip.domain.com (1000@sip.domain.com)

ERROR[1748]: res_pjsip/pjsip_options.c:350 qualify_contact: Unable to create request to qualify contact sip:1000@95.250.29.3:53570;rinstance=d90827763e4353c0

in the aor section I'm using:

qualify_frequency=30


If you set qualify_frequency=0, can that endpoint make and receive calls?  Not suggesting this as a solution, just asking to narrow possibilities down.



 
Quote:

Any hint?

Regards


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by [/url][url=http://www.api-digital.com]http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users




--
George Joseph Digium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: [/url][url=http://www.digium.com]www.digium.com & [/url][url=http://www.asterisk.org]www.asterisk.org













--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




--
George JosephDigium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org
Back to top
annusfictus at gmail.com
Guest





PostPosted: Mon May 16, 2016 3:57 pm    Post subject: [asterisk-users] Asterisk PJSIP Multi-tenant Reply with quote

Done.
ASTERISK-26026
El 16/05/2016 a las 14:40, George Joseph escribió:
Quote:


On Sun, May 15, 2016 at 10:17 PM, Annus Fictus <annusfictus@gmail.com (annusfictus@gmail.com)> wrote:
Quote:

Hello,
with qualify_frequency=0 I can't receive calls from others endpoints.
Other strange think is if I set mailboxes parameter on the console, when the endpoint registering, i can see:
ERROR[2208]: res_pjsip.c:2946 create_out_of_dialog_request: Unable to create outbound NOTIFY request to endpoint [url=mailto:1001@sip.domain.com]1001@sip.domain.com (1001@sip.domain.com)[/url]
WARNING[2208]: res_pjsip_mwi.c:379 send_unsolicited_mwi_notify_to_contact: Unable to create unsolicited NOTIFY request to endpoint [url=mailto:1001@sip.domain.com]1001@sip.domain.com (1001@sip.domain.com)[/url] URI sip:1001@95.250.29.3:50673;rinstance=1af959e7c0059fc4
Unsolicited NOTIFY and OPTIONS both use the out-of-dialog path so I'm guessing we have an issue there.  Open an issue at https://issues.asterisk.org






 
Quote:

Regards
El 16/05/2016 a las 02:52, George Joseph escribió:

Quote:



On Sun, May 15, 2016 at 12:00 PM, Annus Fictus <[url=mailto:annusfictus@gmail.com]annusfictus@gmail.com (annusfictus@gmail.com)[/url]> wrote:
Quote:
Hello List,

following this thread:

http://asterisk-users.digium.narkive.com/ulR5hd1M/same-pjsip-username-with-differents-domains

I tried to configure on the pjsip.conf the same endpoint with different domains like:

[1000@sip.domain.com (1000@sip.domain.com)]
type=endpoint

[1000@sip1.domain.com (1000@sip1.domain.com)]
type=endpoint

I can register the two 1000 endpoints using different domain but on the Asterisk console:

ERROR[1748]: res_pjsip.c:2946 create_out_of_dialog_request: Unable to create outbound OPTIONS request to endpoint 1000@sip.domain.com (1000@sip.domain.com)

ERROR[1748]: res_pjsip/pjsip_options.c:350 qualify_contact: Unable to create request to qualify contact sip:1000@95.250.29.3:53570;rinstance=d90827763e4353c0

in the aor section I'm using:

qualify_frequency=30


If you set qualify_frequency=0, can that endpoint make and receive calls?  Not suggesting this as a solution, just asking to narrow possibilities down.



 
Quote:

Any hint?

Regards


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users




--
George Joseph Digium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org













--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




--
George Joseph Digium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org








Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services