VoIP Mailing List Archives

[mdiehlenator at gmail.com]

Hi all,

I've got a device that seems to become unreachable for about 2 minutes, every
hour. From what I can tell, it isn't due to network or server issues. Any
ideas?

TIA.


--
Mike Diehl
Diehlnet Communications, LLC.
Voice: (505) 903-5700
Fax: (505) 903-5701


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[support at telium.ca]

I would guess conflicting IP addresses. It comes back up at regular
intervals, detects the conflict, and shuts down..

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Mike Diehl
Sent: Friday, June 17, 2016 5:57 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] SPA112 flapping

Hi all,

I've got a device that seems to become unreachable for about 2 minutes,
every
hour. From what I can tell, it isn't due to network or server issues. Any
ideas?

TIA.


--
Mike Diehl
Diehlnet Communications, LLC.
Voice: (505) 903-5700
Fax: (505) 903-5701


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[brian at wildsong.biz]

I gave up on a couple devices here in my home network (an old SPA2000 and a cheap DP715 grandstream) and plugged their IP addreses into Asterisk and turned off registration. No more annoying messages. 


On Fri, Jun 17, 2016 at 2:56 PM, Mike Diehl <mdiehlenator@gmail.com (mdiehlenator@gmail.com)> wrote:

[csibra at gmail.com]

Friday, June 17, 2016, 11:56:34 PM, Mike wrote:

[crt.rojas at gmail.com]

Hi
It sounds like a keep alive issue
On Sun, Jun 19, 2016, 4:39 PM Gergo Csibra <csibra@gmail.com (csibra@gmail.com)> wrote:

[mefhigoseth at gmail.com]

Hi Mike,


I would try the following:


* If you can login through HTTP, check the uptime of the Cisco device. Make sure the device is not rebooting.

* If you can, make a 'ping' from the PBX to the device and annotate milli-seconds of response. Then compare then to the default 'qualify' sip setting for the Cisco peer (width sip show peer _SPA112_PEER_NAME_). Maybe you can set 'qualify=X' where 'X' is the measured round-trip time to a peer.

* If the Cisco is behind a NAT device/router, maybe the default 60 seconds for the 'qualifyfreq=60' sip setting is not enough to keep active the session. Try changing this value to something lower like 15 or 30 seconds.


Cheers

--
GnuPG Key ID: 0x39BCA9D8
https://www.github.com/mefhigoseth
...:::[ God Rulz ! ]:::...