VoIP Mailing List Archives :: View topic - [asterisk-users] CALLERID on pjsip doesn't work?

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[asterisk-users] CALLERID on pjsip doesn't work?

VoIP Mailing List Archives Forum Index -> Asterisk Users

View previous topic :: View next topic

Author

Message

andrew at ivins.id.au
Guest

Posted: Fri Jul 01, 2016 1:33 am Post subject: [asterisk-users] CALLERID on pjsip doesn't work?

Asterisk 13.8 Is CALLERID(all) supposed to wok for pjsip? When I do this: exten => 1234,Set(CALLERID(all)="Jon Doe" <+123456789>) same => n,Dial(PJSIP/phone123, 30) I expect the callerid to be as set, but is always seems to be "phone123", the name of the endpoint. Andrew

jcolp at digium.com
Guest

Posted: Fri Jul 01, 2016 4:41 am Post subject: [asterisk-users] CALLERID on pjsip doesn't work?

Andrew Ivins wrote:

Quote:

Asterisk 13.8

Is CALLERID(all) supposed to wok for pjsip? When I do this:

exten => 1234,Set(CALLERID(all)="Jon Doe" <+123456789>)
same => n,Dial(PJSIP/phone123, 30)

Your exten line has no priority, is that how it is in your dialplan?

If not you can isolate things a bit further by trying the following:

Set(CALLERID(all)=Jon Doe <+123456789>)

Or individually:

Set(CALLERID(name)=Jon Doe)
Set(CALLERID(num)=+123456789)

If those don't work I'd suggest showing the console and your
configuration for the endpoint as it's something there instead.

Cheers,

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

andrew at ivins.id.au
Guest

Posted: Sun Jul 03, 2016 9:21 pm Post subject: [asterisk-users] CALLERID on pjsip doesn't work?

On 1 July 2016 at 17:41, Joshua Colp <jcolp@digium.com (jcolp@digium.com)> wrote:

Quote:

exten => 1234,Set(CALLERID(all)="Jon Doe" <+123456789>)
same => n,Dial(PJSIP/phone123, 30)

Your exten line has no priority, is that how it is in your dialplan?

Actually no, I stole that line from an earlier email to this list. Mine has a priority.

Quote:

If not you can isolate things a bit further by trying the following:

Set(CALLERID(all)=Jon Doe <+123456789>)

Or individually:

Set(CALLERID(name)=Jon Doe)
Set(CALLERID(num)=+123456789)

Tried many permutations of this, and the only thing I can get to happen is to make the call present as Anonymous by changing the pres-name/pres-num setting.

It's not a production system, dialplan is pretty simple:

same => _X.1,Set(CALLERID(name-pres)=allowed)
same => n,Set(CALLERID(num-pres)=allowed)
same => n,Set(CALLERID(name)=Fred)
same => n,Set(CALLERID(num)=6123)
same => n,Dial(PJSIP/DEADDEADBEEF, 30)

same => n,Hangup()

DEADDEADBEEF is the name of the endpoint and the endpoint works. I use MAC addresses and plan to dynamically map extensions to them later on (kind of like user mode in freepbx).

In the console, if I log the value of CALLERID, it is what I expect to it to be.

In the pjsip debug, the callerid I am trying to set doesn't appear anywhere.

I'm using your Sorcery stuff backing into astb for pjsip, but I've done a little script to dump it back into text so I can override it in the config file. Therefore it's a bit verbose. Thanks for looking.

[DEADDEADBEEF]
type=aor
support_path=true
default_expiration=3600
qualify_timeout=3.000000
mailboxes=
minimum_expiration=60
outbound_proxy=
voicemail_extension=
maximum_expiration=7200
qualify_frequency=0
authenticate_qualify=false
contact=
max_contacts=1
remove_existing=true

[DEADDEADBEEF]
type=auth
md5_cred=
realm=
auth_type=userpass
password=4D7D9A7F1822
nonce_lifetime=32
username=507B495E565B

[DEADDEADBEEF]
type=endpoint
timers_sess_expires=1800
device_state_busy_at=0
dtls_cipher=
from_domain=
dtls_rekey=0
dtls_fingerprint=SHA-256
direct_media_method=invite
send_rpid=false
pickup_group=
sdp_session=Asterisk
dtls_verify=No
message_context=
mailboxes=
named_pickup_group=
record_on_feature=automixmon
dtls_private_key=
named_call_group=
t38_udptl_maxdatagram=0
media_encryption_optimistic=false
aors=DEADDEADBEEF
rpid_immediate=false
outbound_proxy=
identify_by=username
inband_progress=false
rtp_symmetric=false
transport=transport-udp
rtp_keepalive=0
t38_udptl_ec=none
fax_detect=false
t38_udptl_nat=false
allow_transfer=true
tos_video=0
srtp_tag_32=false
timers_min_se=90
call_group=
sub_min_expiry=0
100rel=yes
direct_media=true
rtp_timeout_hold=0
g726_non_standard=false
dtmf_mode=rfc4733
voicemail_extension=
rtp_timeout=0
dtls_cert_file=
media_encryption=no
media_use_received_transport=false
direct_media_glare_mitigation=none
trust_id_inbound=false
force_avp=false
record_off_feature=automixmon
send_diversion=true
language=
mwi_from_user=
rtp_ipv6=false
ice_support=false
callerid=unknown
aggregate_mwi=true
one_touch_recording=false
cos_video=0
accountcode=
allow=(g722|ulaw|alaw)
rewrite_contact=false
t38_udptl_ipv6=false
tone_zone=
user_eq_phone=false
allow_subscribe=true
rtp_engine=asterisk
auth=DEADDEADBEEF
from_user=DEADDEADBEEF
bind_rtp_to_media_address=false
disable_direct_media_on_nat=false
set_var=
use_ptime=false
outbound_auth=
media_address=
tos_audio=0
dtls_ca_path=
dtls_setup=active
force_rport=false
connected_line_method=invite
callerid_tag=
timers=yes
sdp_owner=-
trust_id_outbound=false
use_avpf=false
context=default
moh_suggest=default
send_pai=false
t38_udptl=false
dtls_ca_file=
callerid_privacy=allowed_not_screened
mwi_subscribe_replaces_unsolicited=false
cos_audio=0

jcolp at digium.com
Guest

Posted: Mon Jul 04, 2016 6:19 am Post subject: [asterisk-users] CALLERID on pjsip doesn't work?

Andrew Ivins wrote:

Quote:

On 1 July 2016 at 17:41, Joshua Colp <jcolp@digium.com
<mailto:jcolp@digium.com>> wrote:

exten => 1234,Set(CALLERID(all)="Jon Doe" <+123456789>)
same => n,Dial(PJSIP/phone123, 30)

Your exten line has no priority, is that how it is in your dialplan?

Actually no, I stole that line from an earlier email to this list. Mine
has a priority.

If not you can isolate things a bit further by trying the following:

Set(CALLERID(all)=Jon Doe <+123456789>)

Or individually:

Set(CALLERID(name)=Jon Doe)
Set(CALLERID(num)=+123456789)

Tried many permutations of this, and the only thing I can get to happen
is to make the call present as Anonymous by changing the
pres-name/pres-num setting.

It's not a production system, dialplan is pretty simple:

same => _X.1,Set(CALLERID(name-pres)=allowed)
same => n,Set(CALLERID(num-pres)=allowed)
same => n,Set(CALLERID(name)=Fred)
same => n,Set(CALLERID(num)=6123)
same => n,Dial(PJSIP/DEADDEADBEEF, 30)
same => n,Hangup()

DEADDEADBEEF is the name of the endpoint and the endpoint works. I use
MAC addresses and plan to dynamically map extensions to them later on
(kind of like user mode in freepbx).

In the console, if I log the value of CALLERID, it is what I expect to
it to be.

<snip>

You have from_user set which will override the user in the From header
which is where callerid would be. You also don't have send_rpid or
send_pai turned on so there would be no alternate way to send it. Try
setting send_rpid or send_pai to yes and trying again.

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

andrew at ivins.id.au
Guest

Posted: Tue Jul 05, 2016 9:10 am Post subject: [asterisk-users] CALLERID on pjsip doesn't work?

Thanks Joshua. That did the trick.

On 4 July 2016 at 19:18, Joshua Colp <jcolp@digium.com (jcolp@digium.com)> wrote:

Quote:

Andrew Ivins wrote:

Quote:

On 1 July 2016 at 17:41, Joshua Colp <jcolp@digium.com (jcolp@digium.com)
<mailto:jcolp@digium.com (jcolp@digium.com)>> wrote:

exten => 1234,Set(CALLERID(all)="Jon Doe" <+123456789>)
same => n,Dial(PJSIP/phone123, 30)

Your exten line has no priority, is that how it is in your dialplan?

Actually no, I stole that line from an earlier email to this list. Mine
has a priority.

If not you can isolate things a bit further by trying the following:

Set(CALLERID(all)=Jon Doe <+123456789>)

Or individually:

Set(CALLERID(name)=Jon Doe)
Set(CALLERID(num)=+123456789)

Tried many permutations of this, and the only thing I can get to happen
is to make the call present as Anonymous by changing the
pres-name/pres-num setting.

It's not a production system, dialplan is pretty simple:

same => _X.1,Set(CALLERID(name-pres)=allowed)
same => n,Set(CALLERID(num-pres)=allowed)
same => n,Set(CALLERID(name)=Fred)
same => n,Set(CALLERID(num)=6123)
same => n,Dial(PJSIP/DEADDEADBEEF, 30)
same => n,Hangup()

DEADDEADBEEF is the name of the endpoint and the endpoint works. I use
MAC addresses and plan to dynamically map extensions to them later on
(kind of like user mode in freepbx).

In the console, if I log the value of CALLERID, it is what I expect to
it to be.

<snip>

You have from_user set which will override the user in the From header which is where callerid would be. You also don't have send_rpid or send_pai turned on so there would be no alternate way to send it. Try setting send_rpid or send_pai to yes and trying again.

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> Asterisk Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum