VoIP Mailing List Archives

[vitor.mazuco at gmail.com]

Hi to everybody,

My IAX is not working, When I type reload IAX it returns me:

AsteriskSlave*CLI> iax2 reload
== Parsing '/etc/asterisk/iax.conf': Found
== Parsing '/etc/asterisk/users.conf': Found
[Aug 26 10:05:04] NOTICE[18078]: chan_iax2.c:13546 set_config:
Ignoring bindport on reload
[Aug 26 10:05:04] NOTICE[18078]: chan_iax2.c:13610 set_config:
Ignoring bindaddr on reload

And the peers is not working:

Name/Username Host Mask
Port Status
Description
prote1-prote2/p 192.168.25.26 (S)
255.255.255.255 4569 (T) UNREACHABLE
1 iax2 peers [0 online, 1 offline, 0 unmonitored]


See my both iax.conf

SERVER 1
[General]
bindport=4659
bindaddr = all
disallow=all
allow=ulaw;alaw
;Contas para os servidores das filiais.
;;
[prote1-prote2]
secret= password
username=prote1-prote2
host=192.168.25.26
type=friend
context=ramais
qualify=yes
trunk=yes
auth = md5
;;


SERVER 2

[General]
bindport=4659
bindaddr=all
disallow=all
allow=ulaw;alaw
;Contas para os servidores das filiais.
;;
[prote1-prote2]
secret= password
username=prote1-prote2
host=192.168.25.25
type=friend
context=ramais
qualify=yes
trunk=yes
auth = md5
;;
;;


How can I fix it?


Thanks.

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
http://www.asterisk.org/community/astricon-user-conference

New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[mailinglist at linuxis...]

On Fri, 2016-08-26 at 10:12 -0300, Vitor Mazuco wrote:

[vitor.mazuco at gmail.com]

Hi, I have already tried to change for bindaddr=0.0.0.0

but it didn't worked.

2016-08-26 11:44 GMT-03:00, Frank Vanoni <mailinglist@linuxista.com>:

[vitor.mazuco at gmail.com]

Hi, see the log below

root@AsteriskSlave:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff
3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff
inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1
valid_lft forever preferred_lft forever
inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic
valid_lft 86398sec preferred_lft 43198sec
inet6 fe80::2e0:4cff:fe44:195/64 scope link
valid_lft forever preferred_lft forever
4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff

and

root@AsteriskSlave:~# netstat -anp | grep ast
tcp 0 0 0.0.0.0:2000 0.0.0.0:*
OUÇA 2050/asterisk
tcp 0 0 0.0.0.0:5338 0.0.0.0:*
OUÇA 2050/asterisk
udp 0 0 0.0.0.0:38180 0.0.0.0:*
2050/asterisk
udp 0 0 0.0.0.0:4520 0.0.0.0:*
2050/asterisk
udp 0 0 0.0.0.0:4659 0.0.0.0:*
2050/asterisk
udp 0 0 0.0.0.0:2727 0.0.0.0:*
2050/asterisk
udp 0 0 0.0.0.0:5000 0.0.0.0:*
2050/asterisk
udp 0 0 0.0.0.0:5089 0.0.0.0:*
2050/asterisk
unix 2 [ ACC ] STREAM OUVINDO 484
2050/asterisk /var/run/asterisk/asterisk.ctl
unix 2 [ ] DGRAM 11686 2050/asterisk

2016-08-26 19:21 GMT-03:00, Telium Technical Support <support@telium.ca>:

[vitor.mazuco at gmail.com]

I just see warning?


2016-08-29 11:30 GMT-03:00, Telium Technical Support <support@telium.ca>:

[vitor.mazuco at gmail.com]

Sorry,

I just see warning.



2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco@gmail.com>:

[vitor.mazuco at gmail.com]

Hummm, but why It is with that problem?

I use UCARP, maybe is this the problem?


2016-08-29 12:17 GMT-03:00, Telium Technical Support <support@telium.ca>:

[vitor.mazuco at gmail.com]

Humm right
I think the UCARP can be the problem
It is the problem about sip and rtp ports
I will remove it and make the tests
Thanks man
Em 29/08/2016 14:19, "Telium Technical Support" <support@telium.ca (support@telium.ca)> escreveu:

[vitor.mazuco at gmail.com]

Yes, UCARP is the problem about the sip ports

It conflict with ports IAX, SIP, RTP, etc.

Thanks man.

2016-08-29 21:44 GMT-03:00, Vitor Mazuco <vitor.mazuco@gmail.com>: