VoIP Mailing List Archives

[markmorreny at gmail.com]

Hi all,

I am using Digium PCI board to receive PSTN call through regular phone
line. It is no problem for me to receive calls, but I am not able to obtain
the Caller ID if the calls are from the phone line.
exten => s,1,Answer()
exten => s, n, Verbose(1|incoming number is ${CHANNEL} calling to ${EXTEN}
routing to ${phonenum} )
exten => s,n, Verbose(1|callid is ${CALLID(num)})
exten => s,n,Verbose(1|callpres is ${CALLINGPRES})
exten => s,n,Dial(SIP/${phonenum}@voipuser,60)



-- Executing [s at incoming:3] Verbose("Zap/1-1", "1|incoming number is
Zap/1-1 calling to s routing to ") in new stack
-- Executing [s at incoming:4] Verbose("Zap/1-1", "1| callidall is ") in
new stack
callidall is
-- Executing [s at incoming:5] Verbose("Zap/1-1", "1|callid is ") in new
stack
callid is
-- Executing [s at incoming:6] Verbose("Zap/1-1", "1|callpres is 0") in new
stack

How come I am not able to get the call from ID and call to ID? Is this
something with my setup?

Thanks,
Mark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080323/8e701396/attachment.htm

[spamsucks2005 at gmail...]

On Sun, Mar 23, 2008 at 3:54 PM, mark morreny <markmorreny at gmail.com> wrote:

[gordon+asterisk at dro...]

On Sun, 23 Mar 2008, mark morreny wrote:

[markmorreny at gmail.com]

Hi Gordon and all,

Thank you! It works. The other problem is that I also want to get the
destination numbers as I have multiple DIDs on the same line.
When I use exten => s,n,Noop(Destination number is ${EXTEN}) in
extentions.conf, I get "s" as the return value.
Is there anyway to get the actual calling number?

Thanks again,
Mark