VoIP Mailing List Archives

[peder at networkoblivi...]

How does the g729 encoder/decoder count in regards to the total number
of licenses and how does it count an encoder/decoder? I looked on the
wiki and don't really see anything that explains it. In other words,
how do the calls below count (assume no reinvite)?

g729 phone calls into voicemail

g729 phone calls g711 phone

g729 phone calls other g729 phone

[vicky.r at gmail.com]

When g729 phone calls another g729 phone and you are not recording
calls or doing meetme with them then license is not required ... g729
phone calling g711 will require a license to transcode the g729 side (
no license for g711 side of call ) . In short anytime u need to
convert g729 into some other codec ( transcoding ) you need 1 license
.

On Wed, Apr 2, 2008 at 1:59 AM, Peder @ NetworkOblivion
<peder at networkoblivion.com> wrote:

[peder at networkoblivi...]

That makes sense. A call from 729 to 711 would require one encoder and
one decoder, right?

So if you have 10 licenses, is it 10 total encoders+decoders, or 10
calls (some may require encode, or decode, or both)? Because I had 10
licenses, but my encoders+decoders was more than 10 and calls worked
fine. However I also ran out of licenses when neither number was >=10.

Jaswinder Singh wrote:

[digium at sanguinarius...]

Peder @ NetworkOblivion wrote: