VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
bwessels at macsbone.de
Guest
|
 Posted: Fri Apr 04, 2008 4:52 am Post subject: [asterisk-users] Problems with E400P Cards |
 |
|
Hi All,
i?ve dealed around with two E400P Cards the last 3 Days and I cant
figure out why this problem exists.
Here the description:
I have two E400P Quad E1 Cards. One is in NT Mode and the other is in
TE(CPE) Mode.
When I connect both cards via E1-Cross Cabel the cards wont sync. I see
in zttool Red Alarm and SyncSource:Internally Clocked.
I see Bipolar Voilations Counting up.
Now comes the tricky part.
I have a third Card. A Rhino R4T1 in E1 Mode(TE). When i plugg my
crosscable from E400P to Rhina. Pling Sync is perfect.
zttool says : no alarms, SyncSource : Tormenta PCI...... Everything is fine.
What the hell (sorry) is the problem?!? Dont know why both E400P Cards
wont sync. But they sync if i plug it into a rhino port.?!?!
Anybody has some idea?!?!
Here is my zaptel.conf of the E400P in NT Mode:
span=1,0,4,ccs,hdb3,crc4
span=2,0,4,ccs,hdb3,crc4
span=3,0,4,ccs,hdb3,crc4
span=4,0,4,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
bchan=32-46,48-62
dchan=47
bchan=63-77,79-93
dchan=78
bchan=94-108,110-124
dchan=109
loadzone=nl
defaultzone=nl
zapata.conf:
------------
[channels]
context=default
switchtype=euroisdn
signalling=pri_cpe
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=no
rxgain=0.0
txgain=0.0
immediate=yes
group=1
signalling=pri_net
channel => 1-15
channel => 17-31
; Span 2
group=2
signalling=pri_net
channel => 32-46
channel => 48-62
; Span 3
group=1
signalling=pri_net
channel => 63-77
channel => 79-93
; Span 4
group=1
signalling=pri_net
channel => 94-108
channel => 110-124
zaptel.conf from e400p in TE(CPE)-Mode:
--------------------------------------------
span=1,1,4,ccs,hdb3,crc4
span=2,2,4,ccs,hdb3,crc4
span=3,3,4,ccs,hdb3,crc4
span=4,4,4,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
bchan=32-46,48-62
dchan=47
bchan=63-77,79-93
dchan=78
bchan=94-108,110-124
dchan=109
loadzone = nl
defaultzone = nl
zapata.conf:
------------
[channels]
context=4e1_1-in
switchtype=euroisdn
signalling=pri_cpe
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=no
rxgain=0.0
txgain=0.0
;immediate=yes
group=1
signalling=pri_cpe
channel => 1-15
channel => 17-31
cas=1-15:1101
; Span 2
group=2
signalling=pri_cpe
channel => 32-46
channel => 48-62
; Span 3
group=3
signalling=pri_cpe
channel => 63-77
channel => 79-93
; Span 4
group=4
signalling=pri_cpe
channel => 94-108
channel => 110-124
Thanks guys for your help....
Yours
Bernhard |
|
| Back to top |
|
 |
bwessels at macsbone.de
Guest
|
| Posted: Fri Apr 04, 2008 5:48 am Post subject: [asterisk-users] Problems with E400P Cards |
|
|
| Quote: | None of the spans (ports) is configured to provide clock to the other
side.
|
| Quote: | If you want to cross-connect port 1 and port 2, you should use something
like:
|
| Quote: | span=1,1,4,ccs,hdb3,crc4
span=2,0,4,ccs,hdb3,crc4
|
| Quote: | (And run ztcfg after that)
|
Yes i know. The NT System is providing the clock. So i must not define a timing source on the NT System.
But even when i try your guess. The result is the same.
I have played with all kind of configtypes. Nothing will work.
The Joke is. When i plug my cross into the rhino card in TE mode. An use my config Span=1,0,4,etc. on the E400P they will sync. |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
