VoIP Mailing List Archives

[asterisk02 at in-put.de]

Hello,

I have switched on DND on a SNOM 360. When I call this phone, I get the
following output:

-- Executing [93 at local:1] Dial("SIP/user4-0821b0e8",
"SIP/user3|20|tr") in new stack
-- Called user3
-- Got SIP response 480 "Do Not Disturb" back from 192.168.0.34
-- SIP/user3-081f8d20 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [93 at local:2] Goto("SIP/user4-0821b0e8",
"fehler|s-CONGESTION|1") in new stack
-- Goto (fehler,s-CONGESTION,1)
-- Executing [s-CONGESTION at fehler:1] NoOp("SIP/user4-0821b0e8",
""xCONGESTION"") in new stack
-- Executing [s-CONGESTION at fehler:2] Hangup("SIP/user4-0821b0e8",
"") in new stack

I'm using a separate context to catch the dialstatus

[fehler]
exten => s-NOANSWER,1,NoOp("xNOANSWER")
exten => s-NOANSWER,2,Hangup

exten => s-CHANUNAVAIL,1,NoOp("xCHANUNAVAIL")
exten => s-CHANUNAVAIL,2,Hangup

exten => s-BUSY,1,NoOp("xBUSY")
exten => s-BUSY,2,Hangup

exten => s-CONGESTION,1,NoOp("xCONGESTION")
exten => s-CONGESTION,2,Hangup

exten => _s-.,1,NoOp("????")
exten => _s-.,2,Hangup

Now my question is: Is it possible to tell asterisk that SIP 480
shouldn't result in dialstatus CONGESTION, but in dialstatus BUSY?

Thanks for your help,

Stefan
--

********************************************
in-put GbR - Das Linux-Systemhaus
Stefan-Michael Guenther
Geschaeftsfuehrer
Moltkestrasse 49 D-76133 Karlsruhe
Tel./Fax : +49 (0)721 / 83044 - 98/93
http://www.in-put.de
********************************************
Schulungen Installationen
Beratung Support
Voice-over-IP-Loesungen
********************************************

[oej at edvina.net]

15 apr 2008 kl. 12.06 skrev Stefan Guenther:

[ron.arts at neonova.nl]

Johansson Olle E schreef:

[oej at edvina.net]

15 apr 2008 kl. 13.38 skrev Ron Arts:

[thorn+voip+asterisk-us...]

The only solution that I found for this is to use Asterisk 1.4 with
devstate backport
(http://svncommunity.digium.com/svn/russell/asterisk-1.4/func_devstate-1.4/)
and use the hints and to determine if it's inuse (or any other status)
before the dialing - in order to generate a proper reply. I didn't find
a way to handle the SIP 480 reply using Asterisk 1.2 properly.

Note that it's an idea I was about to run but I didn't get to it yet.
devstate on test machine compiled fine & seems to be working from first
sight.

Tomer.

Stefan Guenther wrote:

[asterisk02 at in-put.de]

Hi,

Johansson Olle E wrote: