VoIP Mailing List Archives

[jmann at txhmg.com]

I'm a little confused with DUNDi and SIP as the backend channel type:

Dundi.conf:
[mappings]
priv => dundi-priv-local,0,SIP,${NUMBER}@a.b.c.d,nopartial

Using the above, the dial string passed to the person on the other box is SIP/${NUMBER}@a.b.c.d<mailto:SIP/$%7bNUMBER%7d at a.b.c.d>

How can you use authentication, along with SIP, along with specifying extension?

My sip.conf has a friend defined:

[priv]
host=dynamic
secret=priv
disallow=all
allow=ulaw
canreinvite=no
nat=no
context=from-internal\
type=friend

I need to specify the sip channel to use the priv peer, priv secret, and pass the extension. I've tried defining my mapping as:

Priv => dundi-priv-local,0,SIP,priv:priv at a.b.c.d/${NUMBER},nopartial

But obviously the console on the far end complains that peer a.b.c.d/${NUMBER} cannot be found.

Thanks for any insight into this. I'd prefer not having to define a sip peer per box(I have 25 connected in my dundi cloud), nor would I like to enable anonymous SIP calls, as I have the ports open to the world for inbound sip from bandwidth.com

________________________________
This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of federal or state law and regulations. If you have received this information in error, please notify Texas Health Management Group immediately at 1-817-310-4999. Texas Health Management Group, its subsidiaries, and affiliates hereby claim all applicable privileges related to this information.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080416/f1039bc8/attachment.htm

[breeveslist at eusnetw...]

Jeremy,

Here is a working sample to compare to. This is an IAX2 setup, but the
only difference is in the mapping change IAX2 to SIP. Notice the 4th
setting in the mapping? It defines to use the IAX2 peer "priv" with
the secret generated of the key defined in the peers section of
dundi.conf. When you look at the peer in iax.conf on the remote box,
there is no host entry and it uses dbsecret=dundi/secret, the

dundi.conf
priv => dundi-internal,0,IAX2,priv:${SECRET}@192.168.99.250/${NUMBER},nopartial

[00:19:66:1C:78:D5] ; Dev Box
model = symmetric
host = 192.168.99.252
inkey = eus
outkey = eus
include = priv
permit = priv
qualify = yes

[jmann at txhmg.com]

I have it working via IAX, when I try changing everything to SIP I can't specify a username and an extension, so it becomes useless.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bruce Reeves
Sent: Thursday, April 17, 2008 6:51 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DUNDi and SIP

Jeremy,

Here is a working sample to compare to. This is an IAX2 setup, but the
only difference is in the mapping change IAX2 to SIP. Notice the 4th
setting in the mapping? It defines to use the IAX2 peer "priv" with
the secret generated of the key defined in the peers section of
dundi.conf. When you look at the peer in iax.conf on the remote box,
there is no host entry and it uses dbsecret=dundi/secret, the

dundi.conf
priv => dundi-internal,0,IAX2,priv:${SECRET}@192.168.99.250/${NUMBER},nopartial

[00:19:66:1C:78:D5] ; Dev Box
model = symmetric
host = 192.168.99.252
inkey = eus
outkey = eus
include = priv
permit = priv
qualify = yes

[breeveslist at eusnetw...]

Jeremy,

Did you get this working?

On Thu, Apr 17, 2008 at 7:38 AM, Jeremy Mann <jmann at txhmg.com> wrote:

[jmann at txhmg.com]

No.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bruce Reeves
Sent: Tuesday, April 22, 2008 6:00 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DUNDi and SIP

Jeremy,

Did you get this working?

On Thu, Apr 17, 2008 at 7:38 AM, Jeremy Mann <jmann at txhmg.com> wrote:

[breeveslist at eusnetw...]

Try this,

[priv]
dbsecret=dundi/secret
disallow=all
allow=ulaw
canreinvite=no
nat=no
context=from-internal
type=friend

priv => dundi-priv-local,0,SIP,priv:${SECRET}@a.b.c.d/${NUMBER},nopartial

On Tue, Apr 22, 2008 at 8:23 AM, Jeremy Mann <jmann at txhmg.com> wrote:

[breeveslist at eusnetw...]

Jeremy,

It is not the dip peer that is failing but the dial plan:

-- Goto (macro-dundi-lookup,400,1)
[Apr 23 12:46:44] WARNING[2269]: chan_sip.c:2898 create_addr: No such
host: 192.168.4.51/400
[Apr 23 12:46:44] WARNING[2269]: app_dial.c:1191 dial_exec_full:
Unable to create channel of type 'SIP' (cause 3 - No route to
destination)
== Everyone is busy/congested at this time (1:0/0/1)

What is in the context macro-dundi-lookup?

On Wed, Apr 23, 2008 at 12:47 PM, Jeremy Mann <jmann at txhmg.com> wrote:

[breeveslist at eusnetw...]

Take a look at this setup, it does not use passwords on the sip peers
or the mappings in Dundi. As long as you inside your network this
maybe the way to go.

http://www.voip-info.org/wiki/view/DUNDi+Enterprise+Configuration+SIP+with+no+passwords

You could also look at the incominglimit and outgoinglimit on IAX peers

On Wed, Apr 23, 2008 at 4:51 PM, Jeremy Mann <jmann at txhmg.com> wrote:

[jmann at txhmg.com]

I think I'm going to go about this a different way, if it works I'll post my solution.

Essentially I'm going to limit the calls by grouping(didn't know you could use categories until I did the research) and math. Limiting our corporate office to 10 IAX calls, both incoming and outgoing together, and denying the call if it's above that(sending chanunavail or something similar).

I'll then run all dials through a macro, looking up dundi routes. If it fails I'll fall back to zap.

Thanks for the help though.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bruce Reeves
Sent: Wednesday, April 23, 2008 5:21 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DUNDi and SIP

Take a look at this setup, it does not use passwords on the sip peers
or the mappings in Dundi. As long as you inside your network this
maybe the way to go.

http://www.voip-info.org/wiki/view/DUNDi+Enterprise+Configuration+SIP+with+no+passwords

You could also look at the incominglimit and outgoinglimit on IAX peers

On Wed, Apr 23, 2008 at 4:51 PM, Jeremy Mann <jmann at txhmg.com> wrote: