VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
abalashov at evaristes...
Guest
|
 Posted: Tue Apr 15, 2008 7:30 pm Post subject: [asterisk-users] wcfxo and X100P card won't play nice. |
 |
|
Greetings,
This may have already been asked many times, but I cannot seem to find a
satisfactory and consistent answer anywhere.
I have an X100P card (from x100p.com) installed in a Dell PowerEdge 2850
or 2650 (cannot recall):
00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
00:00.2 Host bridge: Broadcom CMIC-LE
00:04.0 Class ff00: Dell Embedded Remote Access or ERA/O
00:04.1 Class ff00: Dell Remote Access Card III
00:04.2 Class ff00: Dell Embedded Remote Access: BMC/SMIC device
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93)
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge
00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
01:06.0 Communication controller: Motorola Wildcard X100P
03:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
03:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
04:08.0 PCI bridge: Intel Corporation 80303 I/O Processor PCI-to-PCI
Bridge (rev 01)
04:08.1 RAID bus controller: Dell PowerEdge Expandable RAID Controller
3/Di (rev 01)
But, wcfxo won't recognise it:
NOTICE-wcfxo: WCFXO/0: Unknown DAA chip revision: REVB=0
Failed to initailize DAA, giving up...
wcfxo: probe of 0000:01:06.0 failed with error -5
This is running on a custom-compiled kernel 2.6.24.3 with Asterisk
1.4.18 and Zaptel 1.4.10.
Any ideas?
-- Alex
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599 |
|
| Back to top |
|
 |
brent at texascountryt...
Guest
|
| Posted: Wed Apr 16, 2008 9:44 am Post subject: [asterisk-users] wcfxo and X100P card won't play nice. |
|
|
Alex Balashov wrote:
| Quote: | Greetings,
This may have already been asked many times, but I cannot seem to find a
satisfactory and consistent answer anywhere.
I have an X100P card (from x100p.com) installed in a Dell PowerEdge 2850
or 2650 (cannot recall):
00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
00:00.2 Host bridge: Broadcom CMIC-LE
00:04.0 Class ff00: Dell Embedded Remote Access or ERA/O
00:04.1 Class ff00: Dell Remote Access Card III
00:04.2 Class ff00: Dell Embedded Remote Access: BMC/SMIC device
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93)
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge
00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
01:06.0 Communication controller: Motorola Wildcard X100P
03:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
03:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
04:08.0 PCI bridge: Intel Corporation 80303 I/O Processor PCI-to-PCI
Bridge (rev 01)
04:08.1 RAID bus controller: Dell PowerEdge Expandable RAID Controller
3/Di (rev 01)
But, wcfxo won't recognise it:
NOTICE-wcfxo: WCFXO/0: Unknown DAA chip revision: REVB=0
Failed to initailize DAA, giving up...
wcfxo: probe of 0000:01:06.0 failed with error -5
This is running on a custom-compiled kernel 2.6.24.3 with Asterisk
1.4.18 and Zaptel 1.4.10.
Any ideas?
-- Alex
|
Is that a genuine X100P or a clone? Looks like a modem that has been
made to look like an X100P.
-Brent |
|
| Back to top |
|
|
tzafrir.cohen at xorco...
Guest
|
| Posted: Wed Apr 16, 2008 9:59 am Post subject: [asterisk-users] wcfxo and X100P card won't play nice. |
|
|
On Wed, Apr 16, 2008 at 09:44:25AM -0500, Brent Davidson wrote:
| Quote: | Alex Balashov wrote:
| Quote: | Greetings,
This may have already been asked many times, but I cannot seem to find a
satisfactory and consistent answer anywhere.
I have an X100P card (from x100p.com) installed in a Dell PowerEdge 2850
or 2650 (cannot recall):
00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
00:00.2 Host bridge: Broadcom CMIC-LE
00:04.0 Class ff00: Dell Embedded Remote Access or ERA/O
00:04.1 Class ff00: Dell Remote Access Card III
00:04.2 Class ff00: Dell Embedded Remote Access: BMC/SMIC device
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93)
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge
00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
01:06.0 Communication controller: Motorola Wildcard X100P
03:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
03:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
04:08.0 PCI bridge: Intel Corporation 80303 I/O Processor PCI-to-PCI
Bridge (rev 01)
04:08.1 RAID bus controller: Dell PowerEdge Expandable RAID Controller
3/Di (rev 01)
But, wcfxo won't recognise it:
NOTICE-wcfxo: WCFXO/0: Unknown DAA chip revision: REVB=0
Failed to initailize DAA, giving up...
wcfxo: probe of 0000:01:06.0 failed with error -5
This is running on a custom-compiled kernel 2.6.24.3 with Asterisk
1.4.18 and Zaptel 1.4.10.
Any ideas?
-- Alex
|
Is that a genuine X100P or a clone? Looks like a modem that has been
made to look like an X100P.
|
What's the difference?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.cohen at xorcom.com
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
