VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
al at aj8.org
Guest
|
 Posted: Mon Apr 28, 2008 8:29 am Post subject: [asterisk-users] PRI hangup certain outgoing calls |
 |
|
I have a problem calling a certain number from our PRI line. Calling the
number from a separate PSTN phone works fine.
The remote number seems to have some funny call redivert setup, when you
call it, it answers immediately, makes some kind of beep and then starts
to ring.
Our PRI is in the UK from Telewest/NTL/Virgin Media and most outgoing
calls work without a problem. The server is trixbox based with a Digium
TE410P PRI interface. Trixbox 2.6, Asterisk 1.4.18-3, FreeBPX 2.4.
I'm no expert, but the PRI trace shows that the outgoing call is
proceeding, and then seems to show that my end of the connection has
disconnected the call, but I cannot work out why - it has already agreed
to setup the call!
What is causing this disconnect? Is there some tone detection going on
behind the scenes?
========================================
[zaptel]
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
loadzone = uk
defaultzone = uk
========================================
[zapata]
[channels]
language=en
context=from-zaptel-custom
usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=yes
overlapdial=yes
echocancel=64
echocancelwhenbridged=no
echotraining=yes
rxgain=0.0
txgain=0.0
immediate=no
faxdetect=no
busydetect=no
callprogress=no
pridialplan=local
prilocaldialplan=local
group=1
switchtype = euroisdn
signalling = pri_cpe
channel => 1-8
========================================
PRI Trace
< [ 02 01 01 2b ]
< Supervisory frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 021 P/F: 1
< 0 bytes of data
-- ACKing all packets from 20 to (but not including) 21
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Unsolicited RR with P/F bit, responding
Sending Receiver Ready (23)
| Quote: | Supervisory frame:
SAPI: 00 C/R: 1 EA: 0
TEI: 000 EA: 1
Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
N(R): 023 P/F: 1
0 bytes of data
|
-- Restarting T203 counter
-- Restarting T203 counter
-- Accepting AUTHENTICATED call from 10.1.0.46:
| Quote: | requested format = gsm,
requested prefs = (),
actual format = alaw,
host prefs = (ulaw|alaw|gsm),
priority = mine
|
-- Executing [02081237722 at from-internal:1] Macro("IAX2/255-4",
"user-callerid|SKIPTTL|") in new stack
-- Executing [s at macro-user-callerid:1] NoOp("IAX2/255-4",
"user-callerid: device 255") in new stack
-- Executing [s at macro-user-callerid:2] Set("IAX2/255-4",
"AMPUSER=255") in new stack
-- Executing [s at macro-user-callerid:3] GotoIf("IAX2/255-4",
"0?report") in new stack
-- Executing [s at macro-user-callerid:4] ExecIf("IAX2/255-4",
"0|Set|REALCALLERIDNUM=255") in new stack
-- Executing [s at macro-user-callerid:5] NoOp("IAX2/255-4",
"REALCALLERIDNUM is 255") in new stack
-- Executing [s at macro-user-callerid:6] Set("IAX2/255-4",
"AMPUSER=255") in new stack
-- Executing [s at macro-user-callerid:7] Set("IAX2/255-4",
"AMPUSERCIDNAME=Alastair Battrick") in new stack
-- Executing [s at macro-user-callerid:8] GotoIf("IAX2/255-4",
"0?report") in new stack
-- Executing [s at macro-user-callerid:9] Set("IAX2/255-4",
"AMPUSERCID=255") in new stack
-- Executing [s at macro-user-callerid:10] Set("IAX2/255-4",
"CALLERID(all)="Alastair Battrick" <255>") in new stack
-- Executing [s at macro-user-callerid:11] Set("IAX2/255-4",
"REALCALLERIDNUM=255") in new stack
-- Executing [s at macro-user-callerid:12] ExecIf("IAX2/255-4",
"0|Set|CHANNEL(language)=") in new stack
-- Executing [s at macro-user-callerid:13] NoOp("IAX2/255-4", "TTL:
ARG1: SKIPTTL") in new stack
-- Executing [s at macro-user-callerid:14] GotoIf("IAX2/255-4",
"1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s at macro-user-callerid:23] NoOp("IAX2/255-4", "Using
CallerID "Alastair Battrick" <255>") in new stack
-- Executing [02081237722 at from-internal:2] Set("IAX2/255-4",
"_NODEST=") in new stack
-- Executing [02081237722 at from-internal:3] Macro("IAX2/255-4",
"record-enable|255|OUT|") in new stack
-- Executing [s at macro-record-enable:1] GotoIf("IAX2/255-4",
"0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s at macro-record-enable:4] AGI("IAX2/255-4",
"recordingcheck|20080428-134020|1209386420.22") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20080428-134020|1209386420.22: Outbound recording not
enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s at macro-record-enable:5] NoOp("IAX2/255-4", "No
recording needed") in new stack
-- Executing [02081237722 at from-internal:4] Macro("IAX2/255-4",
"dialout-trunk|1|02081237722||") in new stack
-- Executing [s at macro-dialout-trunk:1] Set("IAX2/255-4",
"DIAL_TRUNK=1") in new stack
-- Executing [s at macro-dialout-trunk:2] ExecIf("IAX2/255-4",
"0|Authenticate|") in new stack
-- Executing [s at macro-dialout-trunk:3] GotoIf("IAX2/255-4",
"0?disabletrunk|1") in new stack
-- Executing [s at macro-dialout-trunk:4] Set("IAX2/255-4",
"DIAL_NUMBER=02081237722") in new stack
-- Executing [s at macro-dialout-trunk:5] Set("IAX2/255-4",
"DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s at macro-dialout-trunk:6] Set("IAX2/255-4",
"GROUP()=OUT_1") in new stack
-- Executing [s at macro-dialout-trunk:7] GotoIf("IAX2/255-4",
"0?nomax") in new stack
-- Executing [s at macro-dialout-trunk:8] GotoIf("IAX2/255-4",
"0?chanfull") in new stack
-- Executing [s at macro-dialout-trunk:9] GotoIf("IAX2/255-4",
"0?skipoutcid") in new stack
-- Executing [s at macro-dialout-trunk:10] Set("IAX2/255-4",
"DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s at macro-dialout-trunk:11] Macro("IAX2/255-4",
"outbound-callerid|1") in new stack
-- Executing [s at macro-outbound-callerid:1] ExecIf("IAX2/255-4",
"0|SetCallingPres|") in new stack
-- Executing [s at macro-outbound-callerid:2] GotoIf("IAX2/255-4",
"1?start") in new stack
-- Goto (macro-outbound-callerid,s,4)
-- Executing [s at macro-outbound-callerid:4] NoOp("IAX2/255-4",
"REALCALLERIDNUM is 255") in new stack
-- Executing [s at macro-outbound-callerid:5] GotoIf("IAX2/255-4",
"1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,10)
-- Executing [s at macro-outbound-callerid:10] Set("IAX2/255-4",
"USEROUTCID="Alastair Battrick" <0255>") in new stack
-- Executing [s at macro-outbound-callerid:11] Set("IAX2/255-4",
"EMERGENCYCID=") in new stack
-- Executing [s at macro-outbound-callerid:12] Set("IAX2/255-4",
"TRUNKOUTCID=") in new stack
-- Executing [s at macro-outbound-callerid:13] GotoIf("IAX2/255-4",
"1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,17)
-- Executing [s at macro-outbound-callerid:17] GotoIf("IAX2/255-4",
"1?usercid") in new stack
-- Goto (macro-outbound-callerid,s,19)
-- Executing [s at macro-outbound-callerid:19] GotoIf("IAX2/255-4",
"0?report") in new stack
-- Executing [s at macro-outbound-callerid:20] Set("IAX2/255-4",
"CALLERID(all)=Alastair Battrick <0255>") in new stack
-- Executing [s at macro-outbound-callerid:21] GotoIf("IAX2/255-4",
"1?report:hidecid") in new stack
-- Goto (macro-outbound-callerid,s,23)
-- Executing [s at macro-outbound-callerid:23] NoOp("IAX2/255-4",
"CallerID set to "Alastair Battrick" <0255>") in new stack
-- Executing [s at macro-dialout-trunk:12] AGI("IAX2/255-4",
"fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
-- AGI Script fixlocalprefix completed, returning 0
-- Executing [s at macro-dialout-trunk:13] Set("IAX2/255-4",
"OUTNUM=02081237722") in new stack
-- Executing [s at macro-dialout-trunk:14] Set("IAX2/255-4",
"custom=ZAP/g1") in new stack
-- Executing [s at macro-dialout-trunk:15] GotoIf("IAX2/255-4",
"1?gocall") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s at macro-dialout-trunk:17] Macro("IAX2/255-4",
"dialout-trunk-predial-hook|") in new stack
-- Executing [s at macro-dialout-trunk:18] GotoIf("IAX2/255-4",
"0?bypass|1") in new stack
-- Executing [s at macro-dialout-trunk:19] GotoIf("IAX2/255-4",
"0?customtrunk") in new stack
-- Executing [s at macro-dialout-trunk:20] Dial("IAX2/255-4",
"ZAP/g1/02081237722|300|") in new stack
-- Making new call for cr 32778
-- Requested transfer capability: 0x00 - SPEECH
pbx*CLI>
| Quote: | [ 00 01 2a 2e 08 02 00 0a 05 04 03 80 90 a3 18 03 a9 83 81 6c 06 41
|
81 30 32 35 35 70 0c c1 30 32 30 38 31 32 33 37 37 32 32 ]
pbx*CLI>
| Quote: | Informational frame:
SAPI: 00 C/R: 0 EA: 0
TEI: 000 EA: 1
N(S): 021 0: 0
N(R): 023 P: 0
37 bytes of data
|
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
| Quote: | Protocol Discriminator: Q.931 ( len=37
Call Ref: len= 2 (reference 10/0xA) (Originator)
Message type: SETUP (5)
[04 03 80 90 a3]
Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
|
capability: Speech (0)
| Quote: | Ext: 1 Trans mode/rate: 64kbps,
|
circuit-mode (16)
| Quote: | Ext: 1 User information layer 1: A-Law (35)
[18 03 a9 83 81]
Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
|
Exclusive Dchan: 0
| Quote: | ChanSel: Reserved
Ext: 1 Coding: 0 Number Specified Channel
|
Type: 3
| Quote: | Ext: 1 Channel: 1 ]
[6c 06 41 81 30 32 35 35]
Calling Number (len= [ Ext: 0 TON: Subscriber Number (4) NPI:
|
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
| Quote: | Presentation: Presentation permitted, user
|
number passed network screening (1) '0255' ]
| Quote: | [70 0c c1 30 32 30 38 31 32 33 37 37 32 32]
Called Number (len=14) [ Ext: 1 TON: Subscriber Number (4) NPI:
|
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '02081237722' ]
q931.c:2881 q931_setup: call 32778 on channel 1 enters state 1 (Call
Initiated)
-- Called g1/02081237722
pbx*CLI>
< [ 00 01 01 2c ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 022 P/F: 0
< 0 bytes of data
-- ACKing all packets from 20 to (but not including) 22
-- ACKing packet 21, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
pbx*CLI>
< [ 02 01 2e 2c 08 02 80 0a 02 18 03 a9 83 81 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 023 0: 0
< N(R): 022 P: 0
< 10 bytes of data
-- ACKing all packets from 21 to (but not including) 22
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 ( len=10
< Call Ref: len= 2 (reference 10/0xA) (Terminator)
< Message type: CALL PROCEEDING (2)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 1 ]
-- Processing IE 24 (cs0, Channel Identification)
q931.c:3428 q931_receive: call 32778 on channel 1 enters state 3
(Outgoing call Proceeding)
Sending Receiver Ready (24)
| Quote: | Supervisory frame:
SAPI: 00 C/R: 1 EA: 0
TEI: 000 EA: 1
Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
N(R): 024 P/F: 0
0 bytes of data
|
-- Restarting T203 counter
-- Restarting T203 counter
-- Zap/1-1 is proceeding passing it to IAX2/255-4
pbx*CLI>
< [ 02 01 30 2c 08 02 80 0a 45 08 02 8a a2 1e 02 82 88 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 024 0: 0
< N(R): 022 P: 0
< 13 bytes of data
-- ACKing all packets from 21 to (but not including) 22
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 ( len=13
< Call Ref: len= 2 (reference 10/0xA) (Terminator)
< Message type: DISCONNECT (69)
< [08 02 8a a2]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: Network beyond the interworking point (10)
< Ext: 1 Cause: Circuit/channel congestion (34), class
= Network Congestion (resource unavailable) (2) ]
< [1e 02 82 88]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0)
0: 0 Location: Public network serving the local user (2)
< Ext: 1 Progress Description: Inband
information or appropriate pattern now available. ( ]
-- Processing IE 8 (cs0, Cause)
-- Processing IE 30 (cs0, Progress Indicator)
q931.c:3563 q931_receive: call 32778 on channel 1 enters state 12
(Disconnect Indication)
Sending Receiver Ready (25)
| Quote: | Supervisory frame:
SAPI: 00 C/R: 1 EA: 0
TEI: 000 EA: 1
Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
N(R): 025 P/F: 0
0 bytes of data
|
-- Restarting T203 counter
-- Restarting T203 counter
-- Channel 0/1, span 1 got hangup request, cause 34
-- Zap/1-1 is circuit-busy
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
peerstate Disconnect Request
q931.c:2716 q931_release: call 32778 on channel 1 enters state 19
(Release Request)
| Quote: | [ 00 01 2c 32 08 02 00 0a 4d 08 02 81 a2 ]
|
| Quote: | Informational frame:
SAPI: 00 C/R: 0 EA: 0
TEI: 000 EA: 1
N(S): 022 0: 0
N(R): 025 P: 0
9 bytes of data
|
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
| Quote: | Protocol Discriminator: Q.931 ( len=9
Call Ref: len= 2 (reference 10/0xA) (Originator)
Message type: RELEASE (77)
[08 02 81 a2]
Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
|
Location: Private network serving the local user (1)
| Quote: | Ext: 1 Cause: Circuit/channel congestion (34),
|
class = Network Congestion (resource unavailable) (2) ]
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [s at macro-dialout-trunk:21] Goto("IAX2/255-4",
"s-CONGESTION|1") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,1)
-- Executing [s-CONGESTION at macro-dialout-trunk:1]
GotoIf("IAX2/255-4", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,3)
-- Executing [s-CONGESTION at macro-dialout-trunk:3]
NoOp("IAX2/255-4", "TRUNK Dial failed due to CONGESTION - failing
through to other trunks") in new stack
-- Executing [02081237722 at from-internal:5] Macro("IAX2/255-4",
"outisbusy|") in new stack
-- Executing [s at macro-outisbusy:1] Playback("IAX2/255-4",
"all-circuits-busy-now|noanswer") in new stack
-- <IAX2/255-4> Playing 'all-circuits-busy-now' (language 'en')
pbx*CLI>
< [ 00 01 01 2e ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 023 P/F: 0
< 0 bytes of data
-- ACKing all packets from 21 to (but not including) 23
-- ACKing packet 22, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
pbx*CLI>
< [ 02 01 32 2e 08 02 80 0a 5a ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 025 0: 0
< N(R): 023 P: 0
< 5 bytes of data
-- ACKing all packets from 22 to (but not including) 23
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 ( len=5
< Call Ref: len= 2 (reference 10/0xA) (Terminator)
< Message type: RELEASE COMPLETE (90)
q931.c:3503 q931_receive: call 32778 on channel 1 enters state 0 (Null)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
Sending Receiver Ready (26)
| Quote: | Supervisory frame:
SAPI: 00 C/R: 1 EA: 0
TEI: 000 EA: 1
Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
N(R): 026 P/F: 0
0 bytes of data
|
-- Restarting T203 counter
-- Restarting T203 counter
-- Executing [s at macro-outisbusy:2] Playback("IAX2/255-4",
"pls-try-call-later|noanswer") in new stack
-- <IAX2/255-4> Playing 'pls-try-call-later' (language 'en')
-- Executing [s at macro-outisbusy:3] Macro("IAX2/255-4",
"hangupcall") in new stack
-- Executing [s at macro-hangupcall:1] ResetCDR("IAX2/255-4", "w") in
new stack
-- Executing [s at macro-hangupcall:2] NoCDR("IAX2/255-4", "") in new
stack
-- Executing [s at macro-hangupcall:3] GotoIf("IAX2/255-4",
"1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s at macro-hangupcall:6] GotoIf("IAX2/255-4",
"1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s at macro-hangupcall:9] GotoIf("IAX2/255-4",
"1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s at macro-hangupcall:11] Hangup("IAX2/255-4", "") in
new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on
'IAX2/255-4' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on
'IAX2/255-4' in macro 'outisbusy'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on
'IAX2/255-4'
-- Hungup 'IAX2/255-4'
pbx*CLI> quit
Executing last minute cleanups
--
Alastair Battrick |
|
| Back to top |
|
 |
stotaro at totarotechn...
Guest
|
| Posted: Mon Apr 28, 2008 8:52 am Post subject: [asterisk-users] PRI hangup certain outgoing calls |
|
|
On Mon, Apr 28, 2008 at 9:29 AM, Alastair Battrick <al at aj8.org> wrote:
| Quote: | I have a problem calling a certain number from our PRI line. Calling the
number from a separate PSTN phone works fine.
The remote number seems to have some funny call redivert setup, when you
call it, it answers immediately, makes some kind of beep and then starts
to ring.
Our PRI is in the UK from Telewest/NTL/Virgin Media and most outgoing
calls work without a problem. The server is trixbox based with a Digium
TE410P PRI interface. Trixbox 2.6, Asterisk 1.4.18-3, FreeBPX 2.4.
I'm no expert, but the PRI trace shows that the outgoing call is
proceeding, and then seems to show that my end of the connection has
disconnected the call, but I cannot work out why - it has already agreed
to setup the call!
What is causing this disconnect? Is there some tone detection going on
behind the scenes?
========================================
[zaptel]
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
loadzone = uk
defaultzone = uk
========================================
[zapata]
[channels]
language=en
context=from-zaptel-custom
usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=yes
overlapdial=yes
echocancel=64
echocancelwhenbridged=no
echotraining=yes
rxgain=0.0
txgain=0.0
immediate=no
faxdetect=no
busydetect=no
callprogress=no
pridialplan=local
prilocaldialplan=local
group=1
switchtype = euroisdn
signalling = pri_cpe
channel => 1-8
========================================
PRI Trace
|
[snipped]
Location: Private network serving the local user (1)
| Quote: | Ext: 1 Cause: Circuit/channel congestion (34),
|
class = Network Congestion (resource unavailable) (2) ]
-- Hungup 'Zap/1-1'
Is this Trixbox/FreePBX? What version of Asterisk?
http://www.trixbox.org/forums/trixbox-forums/help/inbound-calls-over-pri-get-fast-busy
"I believe the issue is a bug
Mon, 04/14/2008 - 12:50pm
I believe the issue is a bug in channel locking in Asterisk 1.4.18.
I'm waiting for Asterisk 1.4.19 to be released through Trixbox, which
has bugfixes applied to fix this exact issue." Last post on the
webpage, seems to be the same issue.
I believe the issue is a bug in channel locking in Asterisk 1.4.18.
I'm waiting for Asterisk 1.4.19 to be released through Trixbox, which
has bugfixes applied to fix this exact issue.
This is the section to focus on. Sorry I cannot be of much help. Can
you dial other numbers, it is just an issue with one in particular?
http://www.voip-info.org/wiki/view/Asterisk+variable+hangupcause
#define AST_CAUSE_NORMAL_CIRCUIT_CONGESTION 34
#define AST_CAUSE_NO_ROUTE_TRANSIT_NET 2 (this is fishy)
I would contact your service provider, they may be able to explain it
better if not fix it.
Thanks,
Steve Totaro |
|
| Back to top |
|
|
al at aj8.org
Guest
|
| Posted: Mon Apr 28, 2008 9:08 am Post subject: [asterisk-users] PRI hangup certain outgoing calls |
|
|
Steve Totaro wrote:
| Quote: | On Mon, Apr 28, 2008 at 9:29 AM, Alastair Battrick <al at aj8.org> wrote:
| Quote: | I have a problem calling a certain number from our PRI line. Calling the
number from a separate PSTN phone works fine.
The remote number seems to have some funny call redivert setup, when you
call it, it answers immediately, makes some kind of beep and then starts
to ring.
Our PRI is in the UK from Telewest/NTL/Virgin Media and most outgoing
calls work without a problem. The server is trixbox based with a Digium
TE410P PRI interface. Trixbox 2.6, Asterisk 1.4.18-3, FreeBPX 2.4.
|
Is this Trixbox/FreePBX? What version of Asterisk?
|
Yes, Trixbox 2.6, Asterisk 1.4.18-3, FreeBPX 2.4.
| Quote: | This is the section to focus on. Sorry I cannot be of much help. Can
you dial other numbers, it is just an issue with one in particular?
|
I can dial out to other numbers without issue. I don't think it is to do
with the bug that you quoted as I do not need to reboot the server to
start making calls to other numbers once this busy message has been
experienced.
--
Alastair Battrick |
|
| Back to top |
|
|
pylinuxian at gmail.com
Guest
|
| Posted: Mon Apr 28, 2008 9:27 am Post subject: [asterisk-users] PRI hangup certain outgoing calls |
|
|
| Quote: |
I can dial out to other numbers without issue.
....
Calling the number from a separate PSTN phone works fine.
|
I have had such problem last week. from PRI interface (i get busy tone as
fast as i finish typing last digit & hit dial) from analog interface I can
make the call without problem.
my provider never could solve it (well so far) & I myself never could
understand what it could be.
is this a special number (call center or something) ? because mine is a call
center number ... so maybe they had a wrong setup on thier servers or
something.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080428/64f318f6/attachment.htm |
|
| Back to top |
|
|
stotaro at totarotechn...
Guest
|
| Posted: Mon Apr 28, 2008 9:27 am Post subject: [asterisk-users] PRI hangup certain outgoing calls |
|
|
On Mon, Apr 28, 2008 at 10:08 AM, Alastair Battrick <al at aj8.org> wrote:
| Quote: | Steve Totaro wrote:
| Quote: | On Mon, Apr 28, 2008 at 9:29 AM, Alastair Battrick <al at aj8.org> wrote:
| Quote: | I have a problem calling a certain number from our PRI line. Calling the
number from a separate PSTN phone works fine.
The remote number seems to have some funny call redivert setup, when you
call it, it answers immediately, makes some kind of beep and then starts
to ring.
Our PRI is in the UK from Telewest/NTL/Virgin Media and most outgoing
calls work without a problem. The server is trixbox based with a Digium
TE410P PRI interface. Trixbox 2.6, Asterisk 1.4.18-3, FreeBPX 2.4.
|
|
| Quote: | Is this Trixbox/FreePBX? What version of Asterisk?
|
Yes, Trixbox 2.6, Asterisk 1.4.18-3, FreeBPX 2.4.
| Quote: | This is the section to focus on. Sorry I cannot be of much help. Can
you dial other numbers, it is just an issue with one in particular?
|
I can dial out to other numbers without issue. I don't think it is to do
with the bug that you quoted as I do not need to reboot the server to
start making calls to other numbers once this busy message has been
experienced.
--
Alastair Battrick
|
It's worth a shot, you should be running the latest 1.4.x code anyways
right? Bugs can manifest themselves in different ways, or possibly
the poster did not explain the issue accurately. I think the bug fits
your problem more than any other explanation.
If not, call your telco immediately to report the issue and also keep
looking on your side. Burn the candle from both ends.
Thanks,
Steve Totaro |
|
| Back to top |
|
|
stotaro at totarotechn...
Guest
|
| Posted: Mon Apr 28, 2008 9:55 am Post subject: [asterisk-users] PRI hangup certain outgoing calls |
|
|
On Mon, Apr 28, 2008 at 10:27 AM, Arthur <pylinuxian at gmail.com> wrote:
| Quote: | | Quote: |
I can dial out to other numbers without issue.
....
Calling the number from a separate PSTN phone works fine.
|
I have had such problem last week. from PRI interface (i get busy tone as
fast as i finish typing last digit & hit dial) from analog interface I can
make the call without problem.
my provider never could solve it (well so far) & I myself never could
understand what it could be.
is this a special number (call center or something) ? because mine is a
call center number ... so maybe they had a wrong setup on thier servers or
something.
|
Curious, are you sending a toll free as your callerID? If so, try
sending your BTN or some other regular toll number.
I had a similar problem dialing a specific number (Gateway) when
sending a toll free callerID, GXing said it was because other telcos
are unsure how to bill the call so they send back busy.
Thanks,
Steve Totaro |
|
| Back to top |
|
|
al at aj8.org
Guest
|
| Posted: Thu May 01, 2008 8:56 am Post subject: [asterisk-users] PRI hangup certain outgoing calls |
|
|
Steve Totaro wrote:
| Quote: | It's worth a shot, you should be running the latest 1.4.x code anyways
right? Bugs can manifest themselves in different ways, or possibly
the poster did not explain the issue accurately. I think the bug fits
your problem more than any other explanation.
|
Steve, the issue appears fixed after a upgrade and reboot, though I do
not know if the remote party have changed their setup.
Thanks for your help
--
Alastair Battrick |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
