VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
View previous topic :: View next topic |
Author |
Message |
jra at baylink.com Guest
|
Posted: Mon Apr 28, 2008 11:16 am Post subject: [asterisk-users] Quality problems with ISDN PRI |
|
|
On Fri, Apr 25, 2008 at 12:29:08PM -0400, Steve Totaro wrote:
Quote: | My dual proc, dual core AMD boxen show as four procs. I guess the AMD
architecture uses Hypertheading (or whatever the equivalent is for
AMD, I assume Intel owns the rights to the name Hyperthreading).
|
No, those really *are* 4-processor boxes. HT Pentiums only have *one*
processor core, but show up as two anyway.
Cheers,
-- jra
--
Jay R. Ashworth Baylink jra at baylink.com
Designer The Things I Think RFC 2100
Ashworth & Associates http://baylink.pitas.com '87 e24
St Petersburg FL USA http://photo.imageinc.us +1 727 647 1274
Those who cast the vote decide nothing.
Those who count the vote decide everything.
-- (Joseph Stalin) |
|
Back to top |
|
|
carles at pina.cat Guest
|
Posted: Tue Apr 29, 2008 5:37 am Post subject: [asterisk-users] Quality problems with ISDN PRI |
|
|
Hi,
On Apr/23/2008, Steve Totaro wrote:
Quote: | On Tue, Apr 22, 2008 at 7:10 AM, Carles Pina i Estany <carles at pina.cat> wrote:
Quote: |
Hello,
We have an Asterisk server with a TE410P Quad-Span togglable E1/T1/J1
card, 3 SPANs configured and OK and one SPAN unconfigured.
In our tests it works fine, but when it has a big laod of calls (say,
from 40 to 60) we have quality problems: some calls has the sound
cut-off (during the call, voice was not stable)
The IRQ card is alone, CPU load was not high, network was fine for sure.
This server is receiving the calls from SIP channels and routing to the
primaries. It's a HP server, multicore, multiCPU.
I'm wondering if someone has had these kind of problems (quality
problems, sound cut off) with 40 and 60 calls but not with 2 or 3, using
Digium cards.
Bit later I will call to Digium but I thought that here there is lot of
people with lot of experience with these cards.
Thank you,
|
Just curious, are you recording these calls because that is around the
I/O threshold for audio issues when recording all calls.
|
no, we are not recording calls. Load average is very empty.
We are in contact with Spanish Digium partner...
Quote: | Also, you say no network issues but what is the rating of your
switches PPS (often overlooked for speed such as 100mb or 1000mb)?
|
100 Mbps, enough for 50 - 60 calls
Thanks,
--
Carles Pina i Estany GPG id: 0x8CBDAE64
http://pinux.info Manresa - Barcelona |
|
Back to top |
|
|
stotaro at totarotechn... Guest
|
Posted: Tue Apr 29, 2008 6:47 am Post subject: [asterisk-users] Quality problems with ISDN PRI |
|
|
Quote: | Quote: | Also, you say no network issues but what is the rating of your
switches PPS (often overlooked for speed such as 100mb or 1000mb)?
|
100 Mbps, enough for 50 - 60 calls
Thanks,
|
I asked for PPS (packets per second) not Mbps they are very different.
Thanks,
Steve Totaro |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|