VoIP Mailing List Archives

[srinivas.antarvedi at ...]

Hello users,

I have been working with a conference setup.

My setup includes:

1)There will be an interface number provided to the user
which might be a DID number or A Toll free number

When user calls the number it asks for the conference room number
and the user pin .

on successfull authentication he will be participated in the conference

2)by didaling the same DID number the administrator of the conference
enters the conference by entering the admin password

on dialing * (for menu option) he only can reduce/increse the volume and
can lock and unlock the conference

but no provision for the
1) kicking out a particular participant
2)Muting/unmuting of a particular participant

so for the above things i should go for the MeetMeAdmin()

but with a DID inward dialing if i want to call a particular command
of MeetMeAdmin()

exten => DID ,1,MeetMe(confnumber,command,user)
This is an unfeasible solution

Then how can i do that as i cannot create 'n' conferences for 'n'
users and monitor
them by entering their appropriate extensions as i have seen in the case
of vicidial ?




--
Srinivas Antarvedi

[dbackeberg at gmail.com]

On Mon, May 5, 2008 at 5:44 AM, srinivas Antarvedi
<srinivas.antarvedi at gmail.com> wrote:

[srinivas.antarvedi at ...]

Hello users,

Actually i am planning to setup a conference system
i have following dialplan

[default]

exten => 12345,1,MeetMe(1234|X)
exten => 12345,2,Hangup()
exten => 1,1,MeetMeAdmin(1234|M|user1)
exten => 1,2,GoTo(12345|1)

exten => 2,1,MeetMeAdmin(1234|m|user1)
exten => 2,2,GoTo(12345|1)

exten => 3,1,MeetMeAdmin(1234|k|user1)
exten => 3,2,GoTo(12345|1)

exten => 4,1,MeetMeAdmin(1234|N)
exten => 4,2,GoTo(12345|1)

exten => 5,1,MeetMeAdmin(1234|n)
exten => 5,2,GoTo(12345|1)

exten => 6,1,MeetMeAdmin(1234|K)
exten => 6,2,GoTo(12345|1)

Actually users login into the conference system by dialing in 12345 to
enter into conference 1234 and the admin presses 1,2,3,4,5,6 to implement
features of conference respectively
Mute single user
unMute single user
Kick single user

Mute total conference
unMute total conference
Kick total conferece

while extensions 4,5,6 working fine but individual users
mute,unmute,kick(1,2,3 options)
not working and the CLI showing specified user not found

can anybody helpme out

not using any zaptel drivers
using only ztdummy

Thanks in advance
Srinivas Antarvedi

[srinivas.antarvedi at ...]

Hello users,

This is regarding MeetMeAdmin() administration from DialPlan
exten => 12345,1,MeetMe(123|MX) ; Enter conference number 123
;Exit conference
by pressing a single digit
exten => 12345,2,Hangup()

exten => 1,1,MeetMeAdmin(123|M|1) ;mute the user 1
exten => 2,1,MeetMeAdmin(123|m|1) ;un-mute the user 1
exten => 3,1,MeetMeAdmin(123|k|1) ;kick the user 1

actually i supposed to give the user values from the usernumber field of
meetme list confnumber command at CLI

i cannot give a channel name (ex: 1000 as in SIP/1000) in the above
MeetMeAdmin()
command under user and the application storing the first channel in
user number 1 and so on...


so from the dialplan how can i control the users for management
purpose(single user
mute,single user unmute ,single user kickout) can it be done??? or cannot??

waiting for valuable suggestions

thanks in advance
regards
srinivas antarvedi



Srinivas Antarvedi