VoIP Mailing List Archives

[rahulyadav1 at gmail.com]

Hi All
I am using asterisk 1.4.18.1.My problem is that Mixmonitor is not recording
complete recording.
Suppose i got a call connected and talking for 3 minutes then mixmonitor
records only 2 minutes of call.
This problem happens randomly.Please help as i am suffering very much due to
this problem.

Rahul Yadav
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080506/875c2a08/attachment.htm

[sanjay.rajdev at feath...]

I had a similar problem. In my case Asterisk was crashing due to MixMonitor() and then automatically restarting.
I have never found a alternative solution to record the calls.
Regards,
Sanjay Rajdev

----- Original Message -----
From: "Rahul Yadav" <rahulyadav1 at gmail.com>
To: asterisk-users at lists.digium.com
Sent: Tuesday, May 6, 2008 10:54:32 PM GMT +05:30 Chennai, Kolkata, Mumbai, New Delhi
Subject: [asterisk-users] Mixmonitor recording issue


Hi All


I am using asterisk 1.4.18.1.My problem is that Mixmonitor is not recording complete recording.
Suppose i got a call connected and talking for 3 minutes then mixmonitor records only 2 minutes of call.
This problem happens randomly.Please help as i am suffering very much due to this problem.

Rahul Yadav
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080506/5cb4f067/attachment.htm

[vinicius at canall.com.br]

I had a similar problem when the calls were not recorded when there was a transfer. Is that your case? If so, the solution is to start recording on the inbound leg of the call for all channels. Just like that:

[default]
exten => _00XXXX[2-6]XXXXXXX,1,Dial(Local/${EXTEN}@recording)

[recording]
exten => _00XXXX[2-6]XXXXXXX,1,MixMonitor(${CALLERID(num)}-${STRFTIME(${EPOCH},America/Sao_Paulo,%Y-%m-%d-%H-%M-%S)}-${EXTEN}.wav)
exten => _00XXXX[2-6]XXXXXXX,n,Dial(Zap/g1/${EXTEN:1})
Att
Vin?cius Fontes
Desenvolvimento
Canall Tecnologia em Comunica??es Ltda.

----- "Rahul Yadav" <rahulyadav1 at gmail.com> escreveu: