Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] How to test dialplan w/o a trunk


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
raanders at acm.org
Guest





PostPosted: Tue May 13, 2008 10:45 am    Post subject: [asterisk-users] How to test dialplan w/o a trunk Reply with quote

I'm working my way through the Starfish book again trying to rid myself
of the baggage ({sip, extensions, voicemail}.conf) I brought from
another system and build the dialplan I really want.

I will be doing this on a test system without a trunk. Just sitting on
the LAN behind the firewall.

Can I, and if so how do I, set-up sip.conf to force my soft-phone to go
to a specific context when I take it off-hook? (The [Dial/Answer] button
in ZoIPer). Or should I set up an extension that just goes to the context?

I guessing

[613]
...
context=incoming
...

should do it.

I don't have the system on the bench yet but would like to get the
dialplan fairly close the first time. Smile
TIA,
Rod
--
Back to top
support at drdos.info
Guest





PostPosted: Tue May 13, 2008 11:10 am    Post subject: [asterisk-users] How to test dialplan w/o a trunk Reply with quote

Roderick A. Anderson wrote:
Quote:
Can I, and if so how do I, set-up sip.conf to force my soft-phone to go
to a specific context when I take it off-hook?

This can be done with a analog phone, but I don't believe you can do it
on a sip channel.
Quote:
(The [Dial/Answer] button
in ZoIPer). Or should I set up an extension that just goes to the context?


That's the route I'd follow.

Doug


--

Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."
Back to top
stotaro at totarotechn...
Guest





PostPosted: Tue May 13, 2008 11:44 am    Post subject: [asterisk-users] How to test dialplan w/o a trunk Reply with quote

Roderick A. Anderson wrote:
Quote:
I'm working my way through the Starfish book again trying to rid myself
of the baggage ({sip, extensions, voicemail}.conf) I brought from
another system and build the dialplan I really want.

I will be doing this on a test system without a trunk. Just sitting on
the LAN behind the firewall.

Can I, and if so how do I, set-up sip.conf to force my soft-phone to go
to a specific context when I take it off-hook? (The [Dial/Answer] button
in ZoIPer). Or should I set up an extension that just goes to the context?

I guessing

[613]
...
context=incoming
...

should do it.

I don't have the system on the bench yet but would like to get the
dialplan fairly close the first time. Smile


TIA,
Rod


Yeah, that should work for sip.conf after filling in the blanks, then in
extensions.conf you need an incoming context to do something like the
echo test or whatever.

Thanks,
Steve Totaro
Back to top
raanders at acm.org
Guest





PostPosted: Tue May 13, 2008 2:49 pm    Post subject: [asterisk-users] How to test dialplan w/o a trunk Reply with quote

Steve Totaro wrote:
Quote:
Roderick A. Anderson wrote:
Quote:
I'm working my way through the Starfish book again trying to rid myself
of the baggage ({sip, extensions, voicemail}.conf) I brought from
another system and build the dialplan I really want.

I will be doing this on a test system without a trunk. Just sitting on
the LAN behind the firewall.

Can I, and if so how do I, set-up sip.conf to force my soft-phone to go
to a specific context when I take it off-hook? (The [Dial/Answer] button
in ZoIPer). Or should I set up an extension that just goes to the context?

I guessing

[613]
...
context=incoming
...

should do it.

I don't have the system on the bench yet but would like to get the
dialplan fairly close the first time. Smile


TIA,
Rod


Doug, Steve; thanks for the reply. I'll go for the low-hanging-fruit
(sip.conf) first. If time permits I'll test both.

Again thanks to you both.
Rod
--
Quote:

Yeah, that should work for sip.conf after filling in the blanks, then in
extensions.conf you need an incoming context to do something like the
echo test or whatever.

Thanks,
Steve Totaro

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services