VoIP Mailing List Archives

[bmcmanus at gmail.com]

I hate to bring up an old thread, however, I'm implementing SLA as well.

I've got SLA working, my tunk executes slatrunk(line1), and my polycom 650
phone rings on the SIP subscribed line (button 1)

I'm assuming slatrunk sends the calls to the SIP/station1 SIP device, so
the call will always appear on "button 1" on the end device?

My question then is how does the receptionist or answering party know which
line this came in on so they can, for example, overhead page and say "Fred,
you have a call on line 1?"

My next observation is on the execution of slatrunk() the call quits
ringing, so the calling party gets dead air. Is that normal?

I believe the call coming in on button 1 is hear to stay, part of the
'trickery' but if their is an easy way to know which line that call is from
that would help, and secondly if slatrunk played a ringing tone till it saw
a station join the bridge that could help.

And perhaps I have everything misconfigured as well

Thank you for all the asterisky things you do!

Brian

On Fri, Nov 30, 2007 at 6:10 PM, Russell Bryant <russell at digium.com> wrote:

[joakimsen at gmail.com]

The docs as far as I can tell are not correct. E.g. Zaptel is required
(because it seems that it uses MeetMe) but none of that is documented.

So yes please do see if you can make the feature work and please post
a working example config for a Polycom phone.

On Fri, Nov 30, 2007 at 8:10 PM, Russell Bryant <russell at digium.com> wrote: