VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
info at tripple-o.nl
Guest
|
 Posted: Sat May 17, 2008 2:01 pm Post subject: [asterisk-users] zaptel 1.4.10 doesn't build on debian etch |
 |
|
Today I have been messing around with updating my residential
phonesystem (it was running a 1.0 version from years ago). I have
downloaded the last source packages for zaptel-1.4.10.1and
asterisk-1.4.19.2. Zaptel doesn't want to build. After a long time of
making this is the output that stops it suddenly. Does it makes sense
to try another lower version of Zaptel, do I miss a package or should
I change a line in the Makefile like I had to do to build Asterisk
(Proc=i586 instead of Proc=<uname -m> which result in i686. The
updated box is now running without zaptel and it seems to work ok but
I would like to add ztdummy for conferences. Any suggestion to solve
this problem is very welcome.
Friendly regards,
Erik de Wild
output uname -a
Linux debian 2.6.18-6-486 #1 Sun Feb 10 22:06:33 UTC 2008 i686 GNU/Linux
#
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -
DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttool
zttool.o -lnewt
#
Can't locate Config_heavy.pl in @INC (@INC contains: /etc/perl /usr/
local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/
share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/
site_perl .) at /usr/lib/perl/5.8/Config.pm line 65.
#
make[2]: Entering directory `/usr/src/asterisk/zaptel-1.4.10.1/kernel/
xpp/utils'
#
cc -I../.. -o print_modes -g -Wall print_modes.c
#
./print_modes >init_fxo_modes
#
for i in zt_registration xpp_sync lszaptel xpp_blink zapconf
zaptel_hardware; do perl -I./zconf -c $i || exit 1; done
#
Can't locate File/Basename.pm in @INC (@INC contains: ./zconf /etc/
perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/
perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/
local/lib/site_perl .) at zt_registration line 11.
#
BEGIN failed--compilation aborted at zt_registration line 11.
#
make[2]: *** [perlcheck] Error 1
#
make[2]: Leaving directory `/usr/src/asterisk/zaptel-1.4.10.1/kernel/
xpp/utils'
#
make[1]: *** [utils-subdirs] Error 2
#
make[1]: Leaving directory `/usr/src/asterisk/zaptel-1.4.10.1'
#
make: *** [all] Error 2 |
|
| Back to top |
|
 |
tzafrir.cohen at xorco...
Guest
|
| Posted: Sat May 17, 2008 4:42 pm Post subject: [asterisk-users] zaptel 1.4.10 doesn't build on debian etch |
|
|
On Sat, May 17, 2008 at 09:01:26PM +0200, Erik de Wild: Tripple-o wrote:
| Quote: | Today I have been messing around with updating my residential
phonesystem (it was running a 1.0 version from years ago). I have
downloaded the last source packages for zaptel-1.4.10.1and
asterisk-1.4.19.2. Zaptel doesn't want to build. After a long time of
making this is the output that stops it suddenly. Does it makes sense
to try another lower version of Zaptel, do I miss a package or should
I change a line in the Makefile like I had to do to build Asterisk
(Proc=i586 instead of Proc=<uname -m> which result in i686. The
updated box is now running without zaptel and it seems to work ok but
I would like to add ztdummy for conferences. Any suggestion to solve
this problem is very welcome.
Friendly regards,
Erik de Wild
output uname -a
Linux debian 2.6.18-6-486 #1 Sun Feb 10 22:06:33 UTC 2008 i686 GNU/Linux
#
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -
DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttool
zttool.o -lnewt
#
Can't locate Config_heavy.pl in @INC (@INC contains: /etc/perl /usr/
local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/
share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/
site_perl .) at /usr/lib/perl/5.8/Config.pm line 65.
|
That's strange.
| Quote: | #
make[2]: Entering directory `/usr/src/asterisk/zaptel-1.4.10.1/kernel/
xpp/utils'
#
cc -I../.. -o print_modes -g -Wall print_modes.c
#
./print_modes >init_fxo_modes
#
for i in zt_registration xpp_sync lszaptel xpp_blink zapconf
zaptel_hardware; do perl -I./zconf -c $i || exit 1; done
#
Can't locate File/Basename.pm in @INC (@INC contains: ./zconf /etc/
perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/
perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/
local/lib/site_perl .) at zt_registration line 11.
#
BEGIN failed--compilation aborted at zt_registration line 11.
|
File::Basename is included in the package perl-modules .
| Quote: | #
make[2]: *** [perlcheck] Error 1
|
(perl-check is a target that runs a test "compilation" (perl -C) of a
number of perl scripts to make sure that they can run. In this case
zt_registration fails due to the lack of File::Basename
You could avoid xpp/utils altogether if you want to save a few MB-s .
But I think you'll e missing some nice utilities.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.cohen at xorcom.com
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
