VoIP Mailing List Archives :: View topic - [asterisk-users] AsteriskNow: No Analog Hardware Detected

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[asterisk-users] AsteriskNow: No Analog Hardware Detected

VoIP Mailing List Archives Forum Index -> Asterisk Users

View previous topic :: View next topic

Author

Message

ssharkey at linuxunlim...
Guest

Posted: Tue May 20, 2008 8:03 am Post subject: [asterisk-users] AsteriskNow: No Analog Hardware Detected

Hello All, I have an older TDM400P (~5-6 years, bought as a developer kit). Previous versions of Trixbox worked fine with it, but I recently tried moving to Asterisk Now, and I am not getting the card recognized. Asterisk Now (And Trixbox) do not see the card, and insist on configuring the ZTDUMMY interface. I'm not sure how to debug this. It's an older card, and I've not updated bios or anything like that (not sure if that's necessary). Some selected info below: LSPCI sees: 01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface lsmod shows: Module Size Used by ipv6 251393 20 autofs4 24517 2 sunrpc 144253 1 ztdummy 9256 0 opvxa1200 36800 0 xpp_usb 20676 0 xpp 127040 1 xpp_usb wcusb 18176 0 wctdm 38720 0 wcfxo 15904 0 wctdm24xxp 110304 0 wcte11xp 28320 0 wct1xxp 17440 0 wcte12xp 63200 0 wct4xxp 298880 0 tor2 92064 0 zaptel 184324 14 ztdummy,opvxa1200,xpp,wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp,tor2 oslec 13848 1 zaptel crc_ccitt 6337 1 zaptel dm_mirror 28869 0 dm_multipath 21577 0 dm_mod 58457 2 dm_mirror,dm_multipath parport_pc 29157 1 lp 15849 0 parport 37513 2 parport_pc,lp snd_intel8x0 35421 0 snd_ac97_codec 93025 1 snd_intel8x0 ac97_bus 6337 1 snd_ac97_codec snd_seq_dummy 7877 0 snd_seq_oss 32577 0 snd_seq_midi_event 11073 1 snd_seq_oss snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42945 0 ide_cd 40033 0 snd_mixer_oss 19009 1 snd_pcm_oss forcedeth 47561 0 floppy 57125 0 k8_edac 18177 0 snd_pcm 72133 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss edac_mc 24977 1 k8_edac i2c_nforce2 10945 0 snd_timer 24645 2 snd_seq,snd_pcm k8temp 9537 0 cdrom 36705 1 ide_cd i2c_core 23745 1 i2c_nforce2 serio_raw 10693 0 snd 52421 9 snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer hwmon 7365 1 k8temp pcspkr 7105 0 soundcore 11552 1 snd snd_page_alloc 14281 2 snd_intel8x0,snd_pcm sata_nv 22469 0 libata 115833 1 sata_nv sd_mod 24897 0 scsi_mod 132685 2 libata,sd_mod ext3 123337 2 jbd 56553 1 ext3 ehci_hcd 32973 0 ohci_hcd 23261 0 uhci_hcd 25421 0 And ztscan says: [1] active=yes alarms=UNCONFIGURED description=ZTDUMMY/1 (source: RTC) 1 name=ZTDUMMY/1 manufacturer= devicetype=Zaptel Dummy Timing Driver location= basechan=1 totchans=0 irq=0

tzafrir.cohen at xorco...
Guest

Posted: Tue May 20, 2008 8:18 am Post subject: [asterisk-users] AsteriskNow: No Analog Hardware Detected

On Tue, May 20, 2008 at 09:03:16AM -0400, Scott Sharkey wrote:

Quote:

Hello All,

I have an older TDM400P (~5-6 years, bought as a developer kit).
Previous versions of Trixbox worked fine with it, but I recently tried
moving to Asterisk Now, and I am not getting the card recognized.
Asterisk Now (And Trixbox) do not see the card, and insist on
configuring the ZTDUMMY interface.

I'm not sure how to debug this. It's an older card, and I've not
updated bios or anything like that (not sure if that's necessary).

Some selected info below:

That information is from the trixbox system, right?

Can you provide the same information from the AstriskNow system?

Also: what is the output of: 'zaptel_hardware' ?

Quote:

LSPCI sees:

01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface

lsmod shows:

Module Size Used by
ipv6 251393 20
autofs4 24517 2
sunrpc 144253 1
ztdummy 9256 0
opvxa1200 36800 0
xpp_usb 20676 0
xpp 127040 1 xpp_usb
wcusb 18176 0
wctdm 38720 0
wcfxo 15904 0
wctdm24xxp 110304 0
wcte11xp 28320 0
wct1xxp 17440 0
wcte12xp 63200 0
wct4xxp 298880 0
tor2 92064 0
zaptel 184324 14
ztdummy,opvxa1200,xpp,wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp,tor2
oslec 13848 1 zaptel
crc_ccitt 6337 1 zaptel
dm_mirror 28869 0
dm_multipath 21577 0
dm_mod 58457 2 dm_mirror,dm_multipath
parport_pc 29157 1
lp 15849 0
parport 37513 2 parport_pc,lp
snd_intel8x0 35421 0
snd_ac97_codec 93025 1 snd_intel8x0
ac97_bus 6337 1 snd_ac97_codec
snd_seq_dummy 7877 0
snd_seq_oss 32577 0
snd_seq_midi_event 11073 1 snd_seq_oss
snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 42945 0
ide_cd 40033 0
snd_mixer_oss 19009 1 snd_pcm_oss
forcedeth 47561 0
floppy 57125 0
k8_edac 18177 0
snd_pcm 72133 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
edac_mc 24977 1 k8_edac
i2c_nforce2 10945 0
snd_timer 24645 2 snd_seq,snd_pcm
k8temp 9537 0
cdrom 36705 1 ide_cd
i2c_core 23745 1 i2c_nforce2
serio_raw 10693 0
snd 52421 9
snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
hwmon 7365 1 k8temp
pcspkr 7105 0
soundcore 11552 1 snd
snd_page_alloc 14281 2 snd_intel8x0,snd_pcm
sata_nv 22469 0
libata 115833 1 sata_nv
sd_mod 24897 0
scsi_mod 132685 2 libata,sd_mod
ext3 123337 2
jbd 56553 1 ext3
ehci_hcd 32973 0
ohci_hcd 23261 0
uhci_hcd 25421 0

And ztscan says:

[1]
active=yes
alarms=UNCONFIGURED
description=ZTDUMMY/1 (source: RTC) 1
name=ZTDUMMY/1
manufacturer=
devicetype=Zaptel Dummy Timing Driver
location=
basechan=1
totchans=0
irq=0

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.cohen at xorcom.com
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir

ssharkey at linuxunlim...
Guest

Posted: Tue May 20, 2008 12:37 pm Post subject: [asterisk-users] AsteriskNow: No Analog Hardware Detected

Tzafrir Cohen wrote:

Quote:

On Tue, May 20, 2008 at 09:03:16AM -0400, Scott Sharkey wrote:

Quote:

That information is from the trixbox system, right?

Yes, though the lspci was the same for the asterisk now, and the
lsmod was very similar. I will have to reload asterisk now tonite
when I get home to verify, but will do that and repost.

Quote:

Can you provide the same information from the AstriskNow system?

AFter I get home tonite.

Quote:

Also: what is the output of: 'zaptel_hardware' ?

No output at all, even with -v

-Scott

Quote:

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> Asterisk Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum