| View previous topic :: View next topic |
| Author |
Message |
cursor at telecomabmex...
Guest
|
 Posted: Tue May 20, 2008 3:33 pm Post subject: [asterisk-users] Busy out a zap channel? |
 |
|
Is there a way to busy out a Zap channel? I have a customer who is
having problems with a line connected to a TDM800 card and we would like
to busy out that line. Since that line is the head of the hunt group I
cannot simply disable that channel, I need to busy the line so calls
will come over the other lines.
--
?Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez Prats
Director de Tecnolog?a
+52-55-91169161 ext 2001 |
|
| Back to top |
|
 |
vinicius at canall.com.br
Guest
|
| Posted: Tue May 20, 2008 3:42 pm Post subject: [asterisk-users] Busy out a zap channel? |
|
|
You could simply short-circuit the two wires of the line. The telco will interpret that as a busy line.
Other than that, you could do this on extensions.conf:
[context]
exten => s,1,Answer()
exten => s,n,Busy()
Att
Vin?cius Fontes
Desenvolvimento
Canall Tecnologia em Comunica??es Ltda.
----- "Carlos Chavez" <cursor at telecomabmex.com> escreveu:
| Quote: | Is there a way to busy out a Zap channel? I have a customer who is
having problems with a line connected to a TDM800 card and we would
like
to busy out that line. Since that line is the head of the hunt group
I
cannot simply disable that channel, I need to busy the line so calls
will come over the other lines.
--
Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez Prats
Director de Tecnolog?a
+52-55-91169161 ext 2001
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
|
| Back to top |
|
|
cursor at telecomabmex...
Guest
|
| Posted: Tue May 20, 2008 4:08 pm Post subject: [asterisk-users] Busy out a zap channel? |
|
|
The problem is that I do not have physical access to the server. The
other problem with that solution is that the first person to dial the
main number will always get a busy tone and only then can someone else
get to another line.
I need to leave the line offhook until further notice.
On Tue, 2008-05-20 at 17:42 -0300, Vin?cius Fontes wrote:
| Quote: | You could simply short-circuit the two wires of the line. The telco will interpret that as a busy line.
Other than that, you could do this on extensions.conf:
[context]
exten => s,1,Answer()
exten => s,n,Busy()
Att
Vin?cius Fontes
Desenvolvimento
Canall Tecnologia em Comunica??es Ltda.
----- "Carlos Chavez" <cursor at telecomabmex.com> escreveu:
| Quote: | Is there a way to busy out a Zap channel? I have a customer who is
having problems with a line connected to a TDM800 card and we would
like
to busy out that line. Since that line is the head of the hunt group
I
cannot simply disable that channel, I need to busy the line so calls
will come over the other lines.
--
Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez Prats
Director de Tecnolog?a
+52-55-91169161 ext 2001
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
--
?Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez Prats
Director de Tecnolog?a
+52-55-91169161 ext 2001 |
|
| Back to top |
|
|
tilghman at mail.jeffa...
Guest
|
| Posted: Tue May 20, 2008 4:48 pm Post subject: [asterisk-users] Busy out a zap channel? |
|
|
On Tuesday 20 May 2008 16:08:19 Carlos Chavez wrote:
| Quote: | The problem is that I do not have physical access to the server. The
other problem with that solution is that the first person to dial the
main number will always get a busy tone and only then can someone else
get to another line.
I need to leave the line offhook until further notice.
|
Then you need to call the telco and request the line be taken out of service.
There is simply no other way that that could be done with an analog line.
--
Tilghman |
|
| Back to top |
|
|
cursor at telecomabmex...
Guest
|
| Posted: Tue May 20, 2008 5:05 pm Post subject: [asterisk-users] Busy out a zap channel? |
|
|
Thank you. Unfortunately the phone Company in Mexico is not very
helpful when it comes to those services.
On Tue, 2008-05-20 at 16:48 -0500, Tilghman Lesher wrote:
| Quote: | On Tuesday 20 May 2008 16:08:19 Carlos Chavez wrote:
| Quote: | The problem is that I do not have physical access to the server. The
other problem with that solution is that the first person to dial the
main number will always get a busy tone and only then can someone else
get to another line.
I need to leave the line offhook until further notice.
|
Then you need to call the telco and request the line be taken out of service.
There is simply no other way that that could be done with an analog line.
|
--
?Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez Prats
Director de Tecnolog?a
+52-55-91169161 ext 2001 |
|
| Back to top |
|
|
asterisk.org at sedwar...
Guest
|
| Posted: Tue May 20, 2008 5:41 pm Post subject: [asterisk-users] Busy out a zap channel? |
|
|
On Tue, 20 May 2008, Carlos Chavez wrote:
| Quote: | Is there a way to busy out a Zap channel? I have a customer who is
having problems with a line connected to a TDM800 card and we would like
to busy out that line. Since that line is the head of the hunt group I
cannot simply disable that channel, I need to busy the line so calls
will come over the other lines.
|
Any chance the client could send somebody to the local equivalent of a
RadioShack and buy a telephone extension cord? Something with a jack on 1
end. Just snip off about 6 inches from the jack, strip off all of the
insulation and twist all the wires together?
Thanks in advance,
------------------------------------------------------------------------
Steve Edwards sedwards at sedwards.com Voice: +1-760-468-3867 PST
Newline Fax: +1-760-731-3000 |
|
| Back to top |
|
|
jra at baylink.com
Guest
|
| Posted: Wed May 21, 2008 10:04 am Post subject: [asterisk-users] Busy out a zap channel? |
|
|
On Tue, May 20, 2008 at 05:42:15PM -0300, Vin?cius Fontes wrote:
| Quote: | You could simply short-circuit the two wires of the line. The telco
will interpret that as a busy line.
|
Please....
600 ohm, 1 watt wirewound resistor. If it's on a short loop, you might
have to go as high as 5 watts. POTS lines can drive a fair amount of
power, as you understand if you've ever dropped a 12" Crescent across a
-48VDC busbar.
Cheers,
-- jra
--
Jay R. Ashworth Baylink jra at baylink.com
Designer The Things I Think RFC 2100
Ashworth & Associates http://baylink.pitas.com '87 e24
St Petersburg FL USA http://photo.imageinc.us +1 727 647 1274
Those who cast the vote decide nothing.
Those who count the vote decide everything.
-- (Joseph Stalin) |
|
| Back to top |
|
|
rcuevas at dim.com.mx
Guest
|
| Posted: Thu May 22, 2008 9:53 am Post subject: [asterisk-users] Busy out a zap channel? |
|
|
Carlos Chavez escribi?:
| Quote: | Thank you. Unfortunately the phone Company in Mexico is not very
helpful when it comes to those services.
On Tue, 2008-05-20 at 16:48 -0500, Tilghman Lesher wrote:
| Quote: | On Tuesday 20 May 2008 16:08:19 Carlos Chavez wrote:
| Quote: | The problem is that I do not have physical access to the server. The
other problem with that solution is that the first person to dial the
main number will always get a busy tone and only then can someone else
get to another line.
I need to leave the line offhook until further notice.
|
Then you need to call the telco and request the line be taken out of service.
There is simply no other way that that could be done with an analog line.
|
|
i'm a satisfied customer from Telmex (phone company in mexico), always
they get my with a solution for every problem. mail me and I told you
for how ask then for help.
Sorry by my poor english |
|
| Back to top |
|
|
|
Search
