VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
sst at sil.at
Guest
|
 Posted: Sat May 24, 2008 1:19 pm Post subject: [asterisk-users] One way Speech issue - only in PAP2T to SIP |
 |
|
Shaun schrieb:
| Quote: | Hi All,
This is puzzling me greatly.
The setup: PAP2T over ADSL registers to Asterisk 1.4?using SIP. Attached to Asterisk are SIP clients. Codec throughout G729 (only have 1 license on Asterisk server loaded though). When calling the SIP clients from PAP2T I can't hear them but they can hear me.
If I call from PAP2T through Asterisk using?IAX2 to a VOIP provider there is speach in both directions!
Any suggestions?
Thanks Shaun
|
check your firewall/nat settings.
If your setup will work for around 5 minutes after you have rebooted the
pap2t then you have to active the nat keep alive and nat mapping service
in the pap2t.
best regards
steve smith |
|
| Back to top |
|
 |
Joe at myl2n.com
Guest
|
| Posted: Sun May 25, 2008 5:08 pm Post subject: [asterisk-users] One way Speech issue - only in PAP2T to SIP |
|
|
In your account settings (sip.conf) for the PAP2T device, do you have reinvite enabled for one or both.. the SIP provider and/or the PAP2T device ?
________________________________
From: asterisk-users-bounces at lists.digium.com [asterisk-users-bounces at lists.digium.com] On Behalf Of Shaun Wingrin [voipsw at gmail.com]
Sent: Sunday, May 25, 2008 3:15 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] One way Speech issue - only in PAP2T to SIP device attached to Asterisk but not PAP2T to Voip service provider
Shaun schrieb:
| Quote: | Hi All,
This is puzzling me greatly.
The setup: PAP2T over ADSL registers to Asterisk 1.4?using SIP. Attached to Asterisk are SIP clients. Codec throughout G729 (only have 1 license on Asterisk server loaded though). When calling the SIP clients from PAP2T I can't hear them but they can hear me.
If I call from PAP2T through Asterisk using?IAX2 to a VOIP provider there is speach in both directions!
Any suggestions?
Thanks Shaun
|
check your firewall/nat settings.
If your setup will work for around 5 minutes after you have rebooted the
pap2t then you have to active the nat keep alive and nat mapping service
in the pap2t.
best regards
steve smith
DEAR STEVE,
THANKS, I DID CHECK THEM AND THEY NEEDED TO BE ACTIVATED. THIS DOES NOT SOLVE THE PROBLE. STILL ONE WAY SPEECH WHEN CALLING PAP2T -->ASTERISK-->SIP DEVICE ATTACHED. HOWEVER PAP2T-->ASTERISK-->SIP PROVIDER WORKS FINE AS WELL AS SIP DEVICE ATTACHED-->ASTERISK-->SIP RPOVIDER.
ANY SUGGESTIOPS WELCOME
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080525/fe8f17b0/attachment.htm |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
