VoIP Mailing List Archives

[mborgognone at wilsons...]

Dears,
I have problem ASTERISK with PSTN SIEMENS EWSD (MFC R2), I don?t receive call for PSTN, i don?t understand why..... please i need your help !!!!

# MFC/R2 normalmente no usa CRC4
span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
loadzone=us
defaultzone=us
[channels]
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
musiconhold=default
protocolclass=mfcr2
protocolvariant=ar,10,10
protocolend=cpe
group = 1
context= e1-incoming
channel => 1-15
channel => 17-31
;skip time slot 16



Here is the LOGS when I try do make calls


Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 <- 0001 [1/ 1/Idle /Idle ]
Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Detected
Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Making a new call with CRN 32769
Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 1101 -> [2/ 2/Idle /Idle ]
Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:2644 handle_uc_event: Unicall/1 event Detected
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 <- 1001 [2/ 2/Seize ack /Seize ack ]
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Far end disconnected(cause=Normal, unspecified cause [31]) - state 0x2
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event: Unicall/1 event Far end disconnected
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2930 handle_uc_event: CRN 32769 - far disconnected cause=Normal, unspecified cause [31]
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Call control(6)
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Drop call(cause=Normal Clearing [16])
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Call disconnected(cause=Normal, unspecified cause [31]) - state 0x800
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event: Unicall/1 event Drop call
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Call control(7)
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Release call
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 1001 -> [1/ 1000/Clear fwd /Seize ack ]
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Release guard expired
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Destroying call with CRN 32769
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event: Unicall/1 event Release call
-- Unicall/1 released
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Channel echo cancel

Best Regards,
Mariano Borgognone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080606/4e1116c4/attachment.htm

[moises.silva at gmail.com]

You need to enable loglevel=255 in unicall.conf and enable all the
levels of logging in logger.conf, otherwise the logs you post don't
say much.

Mois?s Silva

On Fri, Jun 6, 2008 at 2:58 PM, Mariano Borgognone
<mborgognone at wilsonsa.com.ar> wrote:

[mborgognone at wilsons...]

Moises, we've already set debug level at 255 on unicall.conf and at
logger.conf we've enabled full log (notice,warning,error,debug,verbose).

Has anyone experienced with a Siemens EWSD switch?
Anyone knows about to change R2 timers at unicall.conf ?

Please any comment is welcome, thank you..
Mariano.-
----- Original Message -----
From: "Moises Silva" <moises.silva at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Saturday, June 07, 2008 1:27 PM
Subject: Re: [asterisk-users] Help-ASTERISK-MFCR2


You need to enable loglevel=255 in unicall.conf and enable all the
levels of logging in logger.conf, otherwise the logs you post don't
say much.

Mois?s Silva

On Fri, Jun 6, 2008 at 2:58 PM, Mariano Borgognone
<mborgognone at wilsonsa.com.ar> wrote:

[aparres at gmail.com]

Mariano:

Could you send us please the log files, and the console output... so we
can help you.

On Mon, Jun 9, 2008 at 8:01 AM, Mariano Borgognone <
mborgognone at wilsonsa.com.ar> wrote:

[arturo at e-electrosys...]

I don't think is possible to change the R2 timers in unicall.conf, if you
want to do something like that, maybe mfcr2.c in the libmfcr2 source will
give you that chance.

What happend to me once, is that I couldn't complete long distance calls
using telco's E1 (Avantel, Mexico). At the end the problem was, that libmfc
was sending one default signal on the Group II of MFC National Subscriber
Call. In other words, the telco was complaining about one wrong signal. The
solution was to change the signal the libmfr2 was sending using this line:
/* Group II signals. */
- mfcr2->group_ii[UC_CALLER_CATEGORY_NATIONAL_SUBSCRIBER_CALL] =
R2_SIGII_2;
+ mfcr2->group_ii[UC_CALLER_CATEGORY_NATIONAL_SUBSCRIBER_CALL] =
R2_SIGII_1;
In mfcr2.c

Hope it helps,
Ing. Arturo Ochoa N
Electrosystems S RL

-----Mensaje original-----
De: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] En nombre de Mariano
Borgognone
Enviado el: Monday, June 09, 2008 7:02 AM
Para: Asterisk Users Mailing List - Non-Commercial Discussion
Asunto: Re: [asterisk-users] Help-ASTERISK-MFCR2

Moises, we've already set debug level at 255 on unicall.conf and at
logger.conf we've enabled full log (notice,warning,error,debug,verbose).

Has anyone experienced with a Siemens EWSD switch?
Anyone knows about to change R2 timers at unicall.conf ?

Please any comment is welcome, thank you..
Mariano.-


----- Original Message -----
From: "Moises Silva" <moises.silva at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Saturday, June 07, 2008 1:27 PM
Subject: Re: [asterisk-users] Help-ASTERISK-MFCR2


You need to enable loglevel=255 in unicall.conf and enable all the
levels of logging in logger.conf, otherwise the logs you post don't
say much.

Mois?s Silva

On Fri, Jun 6, 2008 at 2:58 PM, Mariano Borgognone
<mborgognone at wilsonsa.com.ar> wrote:

[steveu at coppice.org]

Mariano Borgognone wrote:

[mborgognone at wilsons...]

Alvaro,
we've already set debug level at 255 on unicall.conf and at logger.conf we've enabled full log notice,warning,error,debug,verbose). The log console output is:

Here is the LOGS when I try do make calls, the call will not go to Asterisk

Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 <- 0001 [1/ 1/Idle /Idle ]
Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Detected
Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Making a new call with CRN 32769
Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 1101 -> [2/ 2/Idle /Idle ]
Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
Unicall/1 event Detected
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 <- 1001 [2/ 2/Seize ack /Seize ack ]
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Far end disconnected(cause=Normal, unspecified cause [31]) - state 0x2
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
Unicall/1 event Far end disconnected
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2930 handle_uc_event: CRN
32769 - far disconnected cause=Normal, unspecified cause [31]
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Call control(6)
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Drop call(cause=Normal Clearing [16])
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Call disconnected(cause=Normal, unspecified cause [31]) - state 0x800
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
Unicall/1 event Drop call
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Call control(7)
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Release call
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 1001 -> [1/ 1000/Clear fwd /Seize ack ]
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Release guard expired
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Destroying call with CRN 32769
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
Unicall/1 event Release call -- Unicall/1 released
Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Channel echo cancel

Thanks ... Regards,
Mariano
----- Original Message -----
From: Alvaro Parres
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Monday, June 09, 2008 7:04 PM
Subject: Re: [asterisk-users] Help-ASTERISK-MFCR2


Mariano:

Could you send us please the log files, and the console output... so we can help you.




On Mon, Jun 9, 2008 at 8:01 AM, Mariano Borgognone <mborgognone at wilsonsa.com.ar> wrote:

Moises, we've already set debug level at 255 on unicall.conf and at
logger.conf we've enabled full log (notice,warning,error,debug,verbose).

Has anyone experienced with a Siemens EWSD switch?
Anyone knows about to change R2 timers at unicall.conf ?

Please any comment is welcome, thank you..
Mariano.-



----- Original Message -----
From: "Moises Silva" <moises.silva at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Saturday, June 07, 2008 1:27 PM
Subject: Re: [asterisk-users] Help-ASTERISK-MFCR2


You need to enable loglevel=255 in unicall.conf and enable all the
levels of logging in logger.conf, otherwise the logs you post don't
say much.

Mois?s Silva

On Fri, Jun 6, 2008 at 2:58 PM, Mariano Borgognone
<mborgognone at wilsonsa.com.ar> wrote:

[elcaio at gmail.com]

Hi guys, here I attach a call log made by Mariano (full log enabled in
logger.conf, set debug 100, set verbose 100 on asterisk console)...

1) first call, is one from pstn (EWSD) to our asterisk box.
http://rafb.net/p/HCoodb28.html

2) 2nd call, is one from a sip user registered at asterisk, to a the EWSD switch
http://rafb.net/p/l6PKMI14.html

with those calls are attached too the unicall.conf, zaptel.conf and an
snippet of the extensions.conf

If you need anything more to can help us please tell me..
thanks..
On Tue, Jun 10, 2008 at 9:29 AM, Mariano Borgognone
<mborgognone at wilsonsa.com.ar> wrote: