VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
View previous topic :: View next topic |
Author |
Message |
javickers at solutione... Guest
|
Posted: Wed Jun 11, 2008 10:30 am Post subject: [asterisk-users] IAX2 phones, BRI and Analogue cards |
|
|
Hi,
I've been asked to spec up a small Asterisk system, which needs to:
- Connect to ISDN2e (I'm thinking of using a B100P card here)
- Connect to the POTS (A400P with 1 FXO)
- Allow remote phones (thinking of an ETC 6050 utilising IAX2)
It is a requirement that the POTS analogue card picks up CLI information -
and I'm in the UK which, historically, has lousy CLI support.... certainly,
my AX100P doesn't do it... does anyone have any good news about the A400P,
or do I need to be hunting down a genuine Digium card?
I'm further assuming that an IAX2 phone will work far more reliably through
firewalls & non-static IP addresses (Asterisk box will be on a static IP,
remote/roaming "office" may not be) than a SIP phone, based on my
experiences of getting IAX2 between Asterisks to work.
So -- am I on the right lines with the hardware I've specced above, or
should I be looking at alternatives?
Cheers,
Ade.
Internal Virus Database is out-of-date.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.24.6 - Release Date: 03/06/2008 00:00 |
|
Back to top |
|
|
hwit at a-domani.nl Guest
|
Posted: Wed Jun 11, 2008 2:18 pm Post subject: [asterisk-users] IAX2 phones, BRI and Analogue cards |
|
|
On Wed, 2008-06-11 at 16:30 +0100, Ade Vickers wrote:
Quote: | Hi,
I've been asked to spec up a small Asterisk system, which needs to:
- Connect to ISDN2e (I'm thinking of using a B100P card here)
- Connect to the POTS (A400P with 1 FXO)
- Allow remote phones (thinking of an ETC 6050 utilising IAX2)
It is a requirement that the POTS analogue card picks up CLI information -
and I'm in the UK which, historically, has lousy CLI support.... certainly,
my AX100P doesn't do it... does anyone have any good news about the A400P,
or do I need to be hunting down a genuine Digium card?
I'm further assuming that an IAX2 phone will work far more reliably through
firewalls & non-static IP addresses (Asterisk box will be on a static IP,
remote/roaming "office" may not be) than a SIP phone, based on my
experiences of getting IAX2 between Asterisks to work.
So -- am I on the right lines with the hardware I've specced above, or
should I be looking at alternatives?
|
Can't you leave the picking up of the cli to the isdn line?
Even if it is an ISDN1 (just a B-channel and a D-channel), the chances
of tranferring channel info, like CLI, is better.
I would leave the pots-interfaces for the people stuck with an ordinary
phone (or fax)..
Did you consider sipura 3102? Easier to scale than analogue cards.
And perhaps easier to deploy, no spof,..
hw |
|
Back to top |
|
|
javickers at solutione... Guest
|
Posted: Thu Jun 12, 2008 3:13 am Post subject: [asterisk-users] IAX2 phones, BRI and Analogue cards |
|
|
Hi Hans,
Quote: | Can't you leave the picking up of the cli to the isdn line?
Even if it is an ISDN1 (just a B-channel and a D-channel),
the chances of tranferring channel info, like CLI, is better.
|
If a call comes in over the POTS line, then I still need to get CLI over it.
I'm not sure if the ISDN can be specified to "replace" the POTS analogue
line, whilst retaining the analogue line + ADSL.
Cheers,
Ade.
Internal Virus Database is out-of-date.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.24.6 - Release Date: 03/06/2008 00:00 |
|
Back to top |
|
|
bilmar_gh at yahoo.com Guest
|
Posted: Thu Jun 12, 2008 3:23 am Post subject: [asterisk-users] IAX2 phones, BRI and Analogue cards |
|
|
Hi;
I would like just to know one thing:
Where did u find a good IAX IP Phone?
I am looking in the market since long time to buy such
device and did not find a reliable one till now.
Any advise?
Regards
Bilal
---------------------------
Quote: | Hi,
I've been asked to spec up a small Asterisk system,
| which needs
to:
Quote: | - Connect to ISDN2e (I'm thinking of using a B100P
| card here)
Quote: | - Connect to the POTS (A400P with 1 FXO)
- Allow remote phones (thinking of an ETC 6050
| utilising IAX2)
Quote: |
It is a requirement that the POTS analogue card
| picks up CLI
information -
Quote: | and I'm in the UK which, historically, has lousy CLI
| support....
certainly,
Quote: | my AX100P doesn't do it... does anyone have any good
| news about
the
A400P,
Quote: | or do I need to be hunting down a genuine Digium
| card?
Quote: |
I'm further assuming that an IAX2 phone will work
| far more
reliably
through
Quote: | firewalls & non-static IP addresses (Asterisk box
| will be on a
static
IP,
Quote: | remote/roaming "office" may not be) than a SIP
| phone, based on my
Quote: | experiences of getting IAX2 between Asterisks to
| work.
Quote: |
So -- am I on the right lines with the hardware I've
| specced
above,
or
Quote: | should I be looking at alternatives?
|
Can't you leave the picking up of the cli to the isdn
line?
Even if it is an ISDN1 (just a B-channel and a
D-channel), the chances
of tranferring channel info, like CLI, is better.
I would leave the pots-interfaces for the people stuck
with an ordinary
phone (or fax)..
Did you consider sipura 3102? Easier to scale than
analogue cards.
And perhaps easier to deploy, no spof,..
hw |
|
Back to top |
|
|
javickers at solutione... Guest
|
Posted: Thu Jun 12, 2008 4:01 am Post subject: [asterisk-users] IAX2 phones, BRI and Analogue cards |
|
|
bilal ghayyad wrote:
Quote: | I would like just to know one thing:
Where did u find a good IAX IP Phone?
I am looking in the market since long time to buy such device
and did not find a reliable one till now.
Any advise?
|
I haven't tried any yet; but http://x100p.eu have a few for sale; plus there
are some on eBay, one of which I intend to try out, as it looks very similar
(identical) to the 6050 for some ?30 less...
Cheers,
Ade.
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.3.0/1498 - Release Date: 11/06/2008
19:13 |
|
Back to top |
|
|
jsmith at digium.com Guest
|
Posted: Thu Jun 12, 2008 8:35 am Post subject: [asterisk-users] IAX2 phones, BRI and Analogue cards |
|
|
On Thu, 2008-06-12 at 01:23 -0700, bilal ghayyad wrote:
Quote: | Where did u find a good IAX IP Phone?
|
I've had good success with my Allnet IP-7960 phones. They have the
ability in the firmware to either do SIP or IAX, and they even have a
mode where you dial one prefix to send the call out using the SIP
protocol, and another prefix to send the call out over the IAX protocol.
They're not the best-looking phones in the world, but they seem to work
quite well.
More information (in German) at
http://www.allnet.de/allsip/produkte/all7960.php
--
Jared Smith
Training Manager
Digium, Inc. |
|
Back to top |
|
|
bilmar_gh at yahoo.com Guest
|
Posted: Fri Jun 13, 2008 4:48 am Post subject: [asterisk-users] IAX2 phones, BRI and Analogue cards |
|
|
Dear Jared;
Any web in english? |
|
Back to top |
|
|
ron.arts at neonova.nl Guest
|
Posted: Fri Jun 13, 2008 5:14 am Post subject: [asterisk-users] IAX2 phones, BRI and Analogue cards |
|
|
bilal ghayyad schreef:
Quote: | Dear Jared;
Any web in english?
|
translate.google.com?
Ron
Quote: | From where I can buy it?
Regards
Bilal
----------------------
On Thu, 2008-06-12 at 01:23 -0700, bilal ghayyad wrote:
Quote: | Where did u find a good IAX IP Phone?
|
I've had good success with my Allnet IP-7960 phones. They have the
ability in the firmware to either do SIP or IAX, and they even have a
mode where you dial one prefix to send the call out using the SIP
protocol, and another prefix to send the call out over the IAX protocol.
They're not the best-looking phones in the world, but they seem to work
quite well.
More information (in German) at
http://www.allnet.de/allsip/produkte/all7960.php
| --
NeoNova BV, The Netherlands
Professional internet and VoIP solutions
http://www.neonova.nl Kruislaan 419 1098 VA Amsterdam
info: 020-5628292 servicedesk: 020-5628292 fax: 020-5628291
KvK Amsterdam 34151241
The following disclaimer applies to this email:
http://www.neonova.nl/maildisclaimer |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|