VoIP Mailing List Archives

[markquitoriano at gmai...]

Is there a way to limit or set the calls per second on SIP?
--
Regards,
Mark Quitoriano
Blog | http://mark.quitoriano.org
VicidialNOW! | http://www.vicidialnow.com
APUG! | http://asterisk.org.ph

[eguadamuz at gmail.com]

I know you can limit the total calls in any given time, for example,
you say I would like to have 10 SIP calls established as maximum.

On 6/11/08, Mark Quitoriano <markquitoriano at gmail.com> wrote:

[markquitoriano at gmai...]

yeah something like that. is it possible to set asterisk to make 10
calls per second?

On Thu, Jun 12, 2008 at 8:23 AM, Edgar Guadamuz <eguadamuz at gmail.com> wrote:

[atis at iq-labs.net]

On Thu, Jun 12, 2008 at 9:16 PM, Mark Quitoriano
<markquitoriano at gmail.com> wrote:

[eguadamuz at gmail.com]

Well, as I said, you can tell Asterisk to accept until 10 SIP calls,
for example, at ANY TIME (I don't understand why per second, I mean,
if the 10 calls are established in the same second, they are acepted,
and so they are if they are established in the same milisecond, while
the max concurrent calls is below the limit of 10).

You can do something like this in your dialplan (assuming extensions like _3XX)

exten=>_3XX,1,Set(GROUP()=sip-calls)
exten=>_3XX,2,Set(GROUPCOUNT=${GROUP_COUNT(sip-calls)})
exten=>_3XX,3,GotoIf($[${GROUPCOUNT} > ${MAX_CALLS}]?120)
exten=>_3XX,4,Dial(SIP/${EXTEN})
exten=>_3XX,5,Playback(unavailable)
exten=>_3XX.,6,Hangup
exten=>_3XX,120,Playback(try-later)
exten=>_3XX,121,Hangup

where ${MAX_CALLS} is a variable defined by you that is the limit of
calls to be accepted

On Thu, Jun 12, 2008 at 12:16 PM, Mark Quitoriano
<markquitoriano at gmail.com> wrote:

[markquitoriano at gmai...]

Hi Edgar,

Thanks for the reply. This setting is good for 10 simultaneous calls.
What i really need is 10 calls being done per second but no limit on
simultaneous calls.
On Fri, Jun 13, 2008 at 2:43 AM, Edgar Guadamuz <eguadamuz at gmail.com> wrote:

[stotaro at totarotechn...]

If you use .call files the you could write a script to create and mv
the .call files in batches of ten every second.

Maybe if you explain the purpose, someone might take more time to
think about it.

Thanks,
Steve T

On Fri, Jun 13, 2008 at 8:57 AM, Mark Quitoriano
<markquitoriano at gmail.com> wrote:

[atis at iq-labs.net]

Hi,

I already gave a hint into right direction, but seems that it got
missed, so basically it would look like this: