VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
jfinstrom at rhinoequi...
Guest
|
 Posted: Fri Jun 13, 2008 11:52 am Post subject: [asterisk-users] PRI crashing Asterisk |
 |
|
I have a user who's system crashes on pri hangup request. Tried 1.4.19.1 and
1.4.20 as well as the latest libpri no change
Progress is as follows......
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 025 P/F: 1
< 0 bytes of data
-- ACKing all packets from 24 to (but not including) 25
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
tbkey*CLI> soft hangup Zap/2-1
Requested Hangup on channel 'Zap/2-1'
[Jun 13 12:44:19] DEBUG[13420]: chan_zap.c:2973 zt_setoption: Set option
AUDIO MODE, value: ON(1) on Zap/2-1
[Jun 13 12:44:19] DEBUG[13420]: chan_zap.c:2612 zt_hangup: Not yet
hungup... Calling hangup once with icause, and clearing call
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Connect
Request
q931.c:2764 q931_disconnect: call 32770 on channel 2 enters state 11
(Disconnect Request)
| Quote: | [ 00 01 32 34 08 02 00 02 45 08 02 81 90 ]
|
| Quote: | Informational frame:
SAPI: 00 C/R: 0 EA: 0
TEI: 000 EA: 1
N(S): 025 0: 0
N(R): 026 P: 0
9 bytes of data
|
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
| Quote: | Protocol Discriminator: Q.931 ( len=9
Call Ref: len= 2 (reference 2/0x2) (Originator)
Message type: DISCONNECT (69)
[08 02 81 90]
Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
|
Location: Private network serving the local user (1)
| Quote: | Ext: 1 Cause: Normal Clearing (16), class = Normal Event
|
(1) ]
[Jun 13 12:44:19] DEBUG[13420]: chan_zap.c:2969 zt_setoption: Set option
AUDIO MODE, value: OFF(0) on Zap/2-1
-- Hungup 'Zap/2-1'
-- Hungup 'IAX2/1002-8371'
host*CLI>
Disconnected from Asterisk server <<< dead...
Thoughts?
James Finstrom
Rhino Equipment Corp.
All Rhino products are made in America, 100% Money Back Guarantee,
and have a 5 Year warranty. Quality and Toughness built in!!
Phone: 1-877-RHINO-T1 ~ FAX: +1 (480) 961-1826
IP: asterisk.rhinoequipment.com ~ FWD: 633686
THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY
MATERIAL and is thus for use only by the intended recipient. If you received
this in error, please contact the sender and delete the email and its
attachments from all computers.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080613/f1b89b91/attachment.htm |
|
| Back to top |
|
 |
stotaro at totarotechn...
Guest
|
| Posted: Fri Jun 13, 2008 1:00 pm Post subject: [asterisk-users] PRI crashing Asterisk |
|
|
On Fri, Jun 13, 2008 at 12:52 PM, James Finstrom
<jfinstrom at rhinoequipment.com> wrote:
| Quote: | I have a user who's system crashes on pri hangup request. Tried 1.4.19.1 and
1.4.20 as well as the latest libpri no change
Progress is as follows......
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 025 P/F: 1
< 0 bytes of data
-- ACKing all packets from 24 to (but not including) 25
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
tbkey*CLI> soft hangup Zap/2-1
Requested Hangup on channel 'Zap/2-1'
[Jun 13 12:44:19] DEBUG[13420]: chan_zap.c:2973 zt_setoption: Set option
AUDIO MODE, value: ON(1) on Zap/2-1
[Jun 13 12:44:19] DEBUG[13420]: chan_zap.c:2612 zt_hangup: Not yet
hungup... Calling hangup once with icause, and clearing call
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Connect
Request
q931.c:2764 q931_disconnect: call 32770 on channel 2 enters state 11
(Disconnect Request)
| Quote: | [ 00 01 32 34 08 02 00 02 45 08 02 81 90 ]
|
| Quote: | Informational frame:
SAPI: 00 C/R: 0 EA: 0
TEI: 000 EA: 1
N(S): 025 0: 0
N(R): 026 P: 0
9 bytes of data
|
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
| Quote: | Protocol Discriminator: Q.931 ( len=9
Call Ref: len= 2 (reference 2/0x2) (Originator)
Message type: DISCONNECT (69)
[08 02 81 90]
Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: Private network serving the local user (1)
Ext: 1 Cause: Normal Clearing (16), class = Normal Event
(1) ]
|
[Jun 13 12:44:19] DEBUG[13420]: chan_zap.c:2969 zt_setoption: Set option
AUDIO MODE, value: OFF(0) on Zap/2-1
-- Hungup 'Zap/2-1'
-- Hungup 'IAX2/1002-8371'
host*CLI>
Disconnected from Asterisk server <<< dead...
Thoughts?
James Finstrom
Rhino Equipment Corp.
All Rhino products are made in America, 100% Money Back Guarantee,
and have a 5 Year warranty. Quality and Toughness built in!!
Phone: 1-877-RHINO-T1 ~ FAX: +1 (480) 961-1826
IP: asterisk.rhinoequipment.com ~ FWD: 633686
|
Core dump? Try SIP instead of IAX2?
Thanks,
Steve T |
|
| Back to top |
|
|
jfinstrom at rhinoequi...
Guest
|
| Posted: Fri Jun 13, 2008 1:41 pm Post subject: [asterisk-users] PRI crashing Asterisk |
|
|
IAX2 wasjust the example for this output originating channel makes no
difference. I can reproduce it zap to zap, sip to zap or iax2 to zap
James Finstrom
Rhino Equipment Corp.
All Rhino products are made in America, 100% Money Back Guarantee,
and have a 5 Year warranty. Quality and Toughness built in!!
Phone: 1-877-RHINO-T1 ~ FAX: +1 (480) 961-1826
IP: asterisk.rhinoequipment.com ~ FWD: 633686
THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY
MATERIAL and is thus for use only by the intended recipient. If you received
this in error, please contact the sender and delete the email and its
attachments from all computers.
On Fri, Jun 13, 2008 at 11:00 AM, Steve Totaro <
stotaro at totarotechnologies.com> wrote:
| Quote: | On Fri, Jun 13, 2008 at 12:52 PM, James Finstrom
<jfinstrom at rhinoequipment.com> wrote:
| Quote: | I have a user who's system crashes on pri hangup request. Tried 1.4.19.1and
1.4.20 as well as the latest libpri no change
Progress is as follows......
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 025 P/F: 1
< 0 bytes of data
-- ACKing all packets from 24 to (but not including) 25
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
tbkey*CLI> soft hangup Zap/2-1
Requested Hangup on channel 'Zap/2-1'
[Jun 13 12:44:19] DEBUG[13420]: chan_zap.c:2973 zt_setoption: Set option
AUDIO MODE, value: ON(1) on Zap/2-1
[Jun 13 12:44:19] DEBUG[13420]: chan_zap.c:2612 zt_hangup: Not yet
hungup... Calling hangup once with icause, and clearing call
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Connect
Request
q931.c:2764 q931_disconnect: call 32770 on channel 2 enters state 11
(Disconnect Request)
| Quote: | [ 00 01 32 34 08 02 00 02 45 08 02 81 90 ]
|
| Quote: | Informational frame:
SAPI: 00 C/R: 0 EA: 0
TEI: 000 EA: 1
N(S): 025 0: 0
N(R): 026 P: 0
9 bytes of data
|
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
| Quote: | Protocol Discriminator: Q.931 ( len=9
Call Ref: len= 2 (reference 2/0x2) (Originator)
Message type: DISCONNECT (69)
[08 02 81 90]
Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: Private network serving the local user (1)
Ext: 1 Cause: Normal Clearing (16), class = Normal
|
|
Event
| Quote: | [Jun 13 12:44:19] DEBUG[13420]: chan_zap.c:2969 zt_setoption: Set option
AUDIO MODE, value: OFF(0) on Zap/2-1
-- Hungup 'Zap/2-1'
-- Hungup 'IAX2/1002-8371'
host*CLI>
Disconnected from Asterisk server <<< dead...
Thoughts?
James Finstrom
Rhino Equipment Corp.
All Rhino products are made in America, 100% Money Back Guarantee,
and have a 5 Year warranty. Quality and Toughness built in!!
Phone: 1-877-RHINO-T1 ~ FAX: +1 (480) 961-1826
IP: asterisk.rhinoequipment.com ~ FWD: 633686
|
Core dump? Try SIP instead of IAX2?
Thanks,
Steve T
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080613/0361f432/attachment.htm |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
