VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
mike240se at straighta...
Guest
|
 Posted: Tue Jun 24, 2008 11:56 pm Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
 |
|
Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the iax2
DID, and we couldnt make calls out even though everything looked ok.
Also there was usually a hung iax2 channel when this happened. Stopping
asterisk also wouldnt work, i would do a "Stop now" and it would just go
back to the cli prompt. I would do a ? and it wouldnt work. I would
have to kill asterisk via ps and then restart it via init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be a
major bug in 1.4.21 but i am not sure.
thanks
mike
This E-mail, including any attachments, may be intended solely for
the personal and confidential use of the sender and recipient(s) named
above. This message may include advisory, consultative and/or
deliberative material and, as such, would be privileged and confidential
and not a public document. Pursuant to 42 CFR, any information in this
e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080625/903b8cb6/attachment.htm |
|
| Back to top |
|
 |
digium at sanguinarius...
Guest
|
| Posted: Wed Jun 25, 2008 4:44 am Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the iax2
DID, and we couldnt make calls out even though everything looked ok.
Also there was usually a hung iax2 channel when this happened. Stopping
asterisk also wouldnt work, i would do a "Stop now" and it would just go
back to the cli prompt. I would do a ? and it wouldnt work. I would
have to kill asterisk via ps and then restart it via init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be a
major bug in 1.4.21 but i am not sure.
thanks
mike
|
I seem to have exactly the same problem, have rolled back to 1.4.19.2 .
Although on my machine I needed to kill -9 the process before it finally
died. (process is launched by safe_asterisk).
1.6.0b9 (running at home) doesn't suffer this. |
|
| Back to top |
|
|
digium at sanguinarius...
Guest
|
| Posted: Wed Jun 25, 2008 5:16 am Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
Thomas Kenyon wrote:
| Quote: | Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the iax2
DID, and we couldnt make calls out even though everything looked ok.
Also there was usually a hung iax2 channel when this happened. Stopping
asterisk also wouldnt work, i would do a "Stop now" and it would just go
back to the cli prompt. I would do a ? and it wouldnt work. I would
have to kill asterisk via ps and then restart it via init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be a
major bug in 1.4.21 but i am not sure.
thanks
mike
|
I seem to have exactly the same problem, have rolled back to 1.4.19.2 .
Although on my machine I needed to kill -9 the process before it finally
died. (process is launched by safe_asterisk).
1.6.0b9 (running at home) doesn't suffer this.
|
I forgot to mention that for the 10 to 20 minutes (at a time) asterisk
1.4.21 is working, chan_alsa also appears to have stopped working (well
produces chan_alsa.c:693 alsa_read: Read error: Resource temporarily
unavailable). |
|
| Back to top |
|
|
tilghman at mail.jeffa...
Guest
|
| Posted: Wed Jun 25, 2008 8:31 am Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
On Tuesday 24 June 2008 23:56:22 Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the iax2
DID, and we couldnt make calls out even though everything looked ok.
Also there was usually a hung iax2 channel when this happened. Stopping
asterisk also wouldnt work, i would do a "Stop now" and it would just go
back to the cli prompt. I would do a ? and it wouldnt work. I would
have to kill asterisk via ps and then restart it via init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be a
major bug in 1.4.21 but i am not sure.
|
Please try the patch in bug number 12903:
http://bugs.digium.com/view.php?id=12903
--
Tilghman |
|
| Back to top |
|
|
mike240se at straighta...
Guest
|
| Posted: Wed Jun 25, 2008 10:53 pm Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
Yes I forgot to mention, I did need to do kill -9 to finally kill it.
We have the exact same bug. Yes mine works for 10 - 20 minutes also. I
am glad I am not alone on this.
Mike
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Thomas
Kenyon
Sent: Wednesday, June 25, 2008 6:17 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
Thomas Kenyon wrote:
| Quote: | Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the
iax2 DID, and we couldnt make calls out even though everything looked
|
|
ok.
| Quote: | | Quote: | Also there was usually a hung iax2 channel when this happened.
Stopping asterisk also wouldnt work, i would do a "Stop now" and it
would just go back to the cli prompt. I would do a ? and it wouldnt
work. I would have to kill asterisk via ps and then restart it via
init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be
|
|
| Quote: | | Quote: | a major bug in 1.4.21 but i am not sure.
thanks
mike
|
I seem to have exactly the same problem, have rolled back to 1.4.19.2
|
.
| Quote: |
Although on my machine I needed to kill -9 the process before it
finally died. (process is launched by safe_asterisk).
1.6.0b9 (running at home) doesn't suffer this.
|
I forgot to mention that for the 10 to 20 minutes (at a time) asterisk
1.4.21 is working, chan_alsa also appears to have stopped working (well
produces chan_alsa.c:693 alsa_read: Read error: Resource temporarily
unavailable).
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now:
http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This E-mail, including any attachments, may be intended solely for
the personal and confidential use of the sender and recipient(s) named
above. This message may include advisory, consultative and/or
deliberative material and, as such, would be privileged and confidential
and not a public document. Pursuant to 42 CFR, any information in this
e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail. |
|
| Back to top |
|
|
mike240se at straighta...
Guest
|
| Posted: Wed Jun 25, 2008 11:01 pm Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
Hopefully the other guy with the problem can test it because this is a
production server and the client is already upset about the problems
this caused for a day or two till I realized what the issue is so I cant
risk it. Maybe I can off hours if he cant though.
Mike
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tilghman
Lesher
Sent: Wednesday, June 25, 2008 9:32 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
On Tuesday 24 June 2008 23:56:22 Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the
iax2 DID, and we couldnt make calls out even though everything looked
|
ok.
| Quote: | Also there was usually a hung iax2 channel when this happened.
Stopping asterisk also wouldnt work, i would do a "Stop now" and it
would just go back to the cli prompt. I would do a ? and it wouldnt
work. I would have to kill asterisk via ps and then restart it via
init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be
a major bug in 1.4.21 but i am not sure.
|
Please try the patch in bug number 12903:
http://bugs.digium.com/view.php?id=12903
--
Tilghman
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now:
http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This E-mail, including any attachments, may be intended solely for
the personal and confidential use of the sender and recipient(s) named
above. This message may include advisory, consultative and/or
deliberative material and, as such, would be privileged and confidential
and not a public document. Pursuant to 42 CFR, any information in this
e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail. |
|
| Back to top |
|
|
stotaro at totarotechn...
Guest
|
| Posted: Wed Jun 25, 2008 11:42 pm Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
Just out of curiosity, why did you feel they needed an upgrade?
Thanks,
Steve
On Thu, Jun 26, 2008 at 12:01 AM, Michael J. Liberatore
<mike240se at straightandnarrowinc.org> wrote:
| Quote: | Hopefully the other guy with the problem can test it because this is a
production server and the client is already upset about the problems
this caused for a day or two till I realized what the issue is so I cant
risk it. Maybe I can off hours if he cant though.
Mike
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tilghman
Lesher
Sent: Wednesday, June 25, 2008 9:32 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
On Tuesday 24 June 2008 23:56:22 Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the
iax2 DID, and we couldnt make calls out even though everything looked
|
ok.
| Quote: | Also there was usually a hung iax2 channel when this happened.
Stopping asterisk also wouldnt work, i would do a "Stop now" and it
would just go back to the cli prompt. I would do a ? and it wouldnt
work. I would have to kill asterisk via ps and then restart it via
init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be
a major bug in 1.4.21 but i am not sure.
|
Please try the patch in bug number 12903:
http://bugs.digium.com/view.php?id=12903
--
Tilghman
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now:
http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This E-mail, including any attachments, may be intended solely for
the personal and confidential use of the sender and recipient(s) named
above. This message may include advisory, consultative and/or
deliberative material and, as such, would be privileged and confidential
and not a public document. Pursuant to 42 CFR, any information in this
e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
| Back to top |
|
|
mike240se at straighta...
Guest
|
| Posted: Thu Jun 26, 2008 2:42 pm Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
If I remember correctly there was a security patch released after
1.4.19, I think that's shwy.
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve
Totaro
Sent: Thursday, June 26, 2008 12:42 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
Just out of curiosity, why did you feel they needed an upgrade?
Thanks,
Steve
On Thu, Jun 26, 2008 at 12:01 AM, Michael J. Liberatore
<mike240se at straightandnarrowinc.org> wrote:
| Quote: | Hopefully the other guy with the problem can test it because this is a
|
| Quote: | production server and the client is already upset about the problems
this caused for a day or two till I realized what the issue is so I
|
cant
| Quote: | risk it. Maybe I can off hours if he cant though.
Mike
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tilghman
|
| Quote: | Lesher
Sent: Wednesday, June 25, 2008 9:32 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
On Tuesday 24 June 2008 23:56:22 Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the
iax2 DID, and we couldnt make calls out even though everything looked
|
ok.
| Quote: | Also there was usually a hung iax2 channel when this happened.
Stopping asterisk also wouldnt work, i would do a "Stop now" and it
would just go back to the cli prompt. I would do a ? and it wouldnt
work. I would have to kill asterisk via ps and then restart it via
init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be
|
|
| Quote: | personal and confidential use of the sender and recipient(s) named
above. This message may include advisory, consultative and/or
deliberative material and, as such, would be privileged and
confidential and not a public document. Pursuant to 42 CFR, any
information in this e-mail identifying a former, present, or potential
|
client of Straight & Narrow is confidential. If you have received this
e-mail in error, you must not review, transmit, convert to hard copy,
copy, use or disseminate this e-mail or any attachments to it and you
must delete this message. You are requested to notify the sender by
return e-mail.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now:
http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
|
mike240se at straighta...
Guest
|
| Posted: Thu Jun 26, 2008 4:32 pm Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
Yes I do remember now, I believe that there was a security vunerability
in 1.4.19 and below that was addressed, that is why I updated. Do you
ask because you want to know if you should upgrade yours or to give me
one of those "you shouldn't upgrade a production server if its not
needed and working fine". I ask because if it's the former, I would be
glad to answer any other questions you have regarding upgrading.
Mike
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael J.
Liberatore
Sent: Thursday, June 26, 2008 3:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
If I remember correctly there was a security patch released after
1.4.19, I think that's shwy.
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve
Totaro
Sent: Thursday, June 26, 2008 12:42 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
Just out of curiosity, why did you feel they needed an upgrade?
Thanks,
Steve
On Thu, Jun 26, 2008 at 12:01 AM, Michael J. Liberatore
<mike240se at straightandnarrowinc.org> wrote:
| Quote: | Hopefully the other guy with the problem can test it because this is a
|
| Quote: | production server and the client is already upset about the problems
this caused for a day or two till I realized what the issue is so I
|
cant
| Quote: | risk it. Maybe I can off hours if he cant though.
Mike
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tilghman
|
| Quote: | Lesher
Sent: Wednesday, June 25, 2008 9:32 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
On Tuesday 24 June 2008 23:56:22 Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the
iax2 DID, and we couldnt make calls out even though everything looked
|
ok.
| Quote: | Also there was usually a hung iax2 channel when this happened.
Stopping asterisk also wouldnt work, i would do a "Stop now" and it
would just go back to the cli prompt. I would do a ? and it wouldnt
work. I would have to kill asterisk via ps and then restart it via
init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be
|
|
| Quote: | personal and confidential use of the sender and recipient(s) named
above. This message may include advisory, consultative and/or
deliberative material and, as such, would be privileged and
confidential and not a public document. Pursuant to 42 CFR, any
information in this e-mail identifying a former, present, or potential
|
client of Straight & Narrow is confidential. If you have received this
e-mail in error, you must not review, transmit, convert to hard copy,
copy, use or disseminate this e-mail or any attachments to it and you
must delete this message. You are requested to notify the sender by
return e-mail.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now:
http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now:
http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
|
mike240se at straighta...
Guest
|
| Posted: Fri Jun 27, 2008 2:09 am Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
I read over the patch details and it seems to address an iax2 issue but
doesn't seem to apply to the cli freezing up and asterisk needing a kill
-9 to stop it. Unless I am missing something.
Mike
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tilghman
Lesher
Sent: Wednesday, June 25, 2008 9:32 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
On Tuesday 24 June 2008 23:56:22 Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the
iax2 DID, and we couldnt make calls out even though everything looked
|
ok.
| Quote: | Also there was usually a hung iax2 channel when this happened.
Stopping asterisk also wouldnt work, i would do a "Stop now" and it
would just go back to the cli prompt. I would do a ? and it wouldnt
work. I would have to kill asterisk via ps and then restart it via
init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be
a major bug in 1.4.21 but i am not sure.
|
Please try the patch in bug number 12903:
http://bugs.digium.com/view.php?id=12903
--
Tilghman
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now:
http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This E-mail, including any attachments, may be intended solely for
the personal and confidential use of the sender and recipient(s) named
above. This message may include advisory, consultative and/or
deliberative material and, as such, would be privileged and confidential
and not a public document. Pursuant to 42 CFR, any information in this
e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail. |
|
| Back to top |
|
|
asterisk at barendse.to
Guest
|
| Posted: Fri Jun 27, 2008 2:46 am Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
I think "the other guy" would be..... me ?
Unfortunately i am also running my asterisk on a production environment
where people start screaming the moment "it doesn't work"
I have 1.4.21 running at 3 locations in a home environment, simple TD400
cards with analog ports and no problems.
My problem was with outgoing iax calls and the PRI going dead not
accepting inbound calls.
If there is any interest i can try and test it this weekend, should i use
the version with or without the mentioned patch?
Would anyone have some cripts to hammer the PRI from my home box? (Using
an IAX termination provider)
Remco
On Thu, 26 Jun 2008, Michael J. Liberatore wrote:
| Quote: | Hopefully the other guy with the problem can test it because this is a
production server and the client is already upset about the problems
this caused for a day or two till I realized what the issue is so I cant
risk it. Maybe I can off hours if he cant though.
Mike
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tilghman
Lesher
Sent: Wednesday, June 25, 2008 9:32 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
On Tuesday 24 June 2008 23:56:22 Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the
iax2 DID, and we couldnt make calls out even though everything looked
|
ok.
| Quote: | Also there was usually a hung iax2 channel when this happened.
Stopping asterisk also wouldnt work, i would do a "Stop now" and it
would just go back to the cli prompt. I would do a ? and it wouldnt
work. I would have to kill asterisk via ps and then restart it via
init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be
a major bug in 1.4.21 but i am not sure.
|
Please try the patch in bug number 12903:
http://bugs.digium.com/view.php?id=12903
--
Tilghman
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now:
http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This E-mail, including any attachments, may be intended solely for
the personal and confidential use of the sender and recipient(s) named
above. This message may include advisory, consultative and/or
deliberative material and, as such, would be privileged and confidential
and not a public document. Pursuant to 42 CFR, any information in this
e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
| Back to top |
|
|
ldidelot at mixvoip.com
Guest
|
| Posted: Fri Jun 27, 2008 3:58 am Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
I just drop in to say that I have the same problem and we have a very
low call volume therefore I could test this weekend.
Best regards,
Loic Didelot.
On Fri, 2008-06-27 at 09:46 +0200, Remco Barendse wrote:
| Quote: | I think "the other guy" would be..... me ?
Unfortunately i am also running my asterisk on a production environment
where people start screaming the moment "it doesn't work"
I have 1.4.21 running at 3 locations in a home environment, simple TD400
cards with analog ports and no problems.
My problem was with outgoing iax calls and the PRI going dead not
accepting inbound calls.
If there is any interest i can try and test it this weekend, should i use
the version with or without the mentioned patch?
Would anyone have some cripts to hammer the PRI from my home box? (Using
an IAX termination provider)
Remco
On Thu, 26 Jun 2008, Michael J. Liberatore wrote:
| Quote: | Hopefully the other guy with the problem can test it because this is a
production server and the client is already upset about the problems
this caused for a day or two till I realized what the issue is so I cant
risk it. Maybe I can off hours if he cant though.
Mike
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tilghman
Lesher
Sent: Wednesday, June 25, 2008 9:32 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Major problem with 1.4.21 asterisk
On Tuesday 24 June 2008 23:56:22 Michael J. Liberatore wrote:
| Quote: | Hi, i upgraded the other ay to 1.4.21 from 1.4.19 and started having
major iax2 problems. All of a sudden calls wouldnt come in on the
iax2 DID, and we couldnt make calls out even though everything looked
|
ok.
| Quote: | Also there was usually a hung iax2 channel when this happened.
Stopping asterisk also wouldnt work, i would do a "Stop now" and it
would just go back to the cli prompt. I would do a ? and it wouldnt
work. I would have to kill asterisk via ps and then restart it via
init.d and then
iax2 would start working again for a short while (maybe a few hours)
I reinstalled 1.4.19 and the problems went away. There appears to be
a major bug in 1.4.21 but i am not sure.
|
Please try the patch in bug number 12903:
http://bugs.digium.com/view.php?id=12903
--
Tilghman
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now:
http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This E-mail, including any attachments, may be intended solely for
the personal and confidential use of the sender and recipient(s) named
above. This message may include advisory, consultative and/or
deliberative material and, as such, would be privileged and confidential
and not a public document. Pursuant to 42 CFR, any information in this
e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
--
Lo?c DIDELOT
MIXvoip S.a.
ldidelot at mixvoip.com
http://www.mixvoip.com |
|
| Back to top |
|
|
tilghman at mail.jeffa...
Guest
|
| Posted: Fri Jun 27, 2008 7:12 am Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
On Friday 27 June 2008 02:09:26 Michael J. Liberatore wrote:
| Quote: | I read over the patch details and it seems to address an iax2 issue but
doesn't seem to apply to the cli freezing up and asterisk needing a kill
-9 to stop it. Unless I am missing something.
|
Without someone providing a 'core show locks' when this problem is happening
(note that you have to compile with DEBUG_THREADS to enable this command),
it's very difficult to diagnose the cause. Tim Panton noted, however, that
when he enabled this option, along with DONT_OPTIMIZE, that the issue ceased
to occur. So perhaps enabling those two options would help you out in the
meantime.
--
Tilghman |
|
| Back to top |
|
|
digium at sanguinarius...
Guest
|
| Posted: Mon Jun 30, 2008 4:11 am Post subject: [asterisk-users] Major problem with 1.4.21 asterisk |
|
|
Steve Totaro wrote:
| Quote: | Just out of curiosity, why did you feel they needed an upgrade?
Thanks,
Steve
|
For me it was a bit of slapdash behaviour on my part.
I'd hreceived a few complaints that sounded like they were probably
asterisk' fault (most interesting one being that one person could hear
in the background someone elses conversation who was in the next office
in their call occasionally).
Rather than looking through bugtracker to see if they'd been reported
and then look into more detail at what was going on, I just updated to
the latest release version to see if anything got magically fixed. (The
new release cheme gives a bit of confidence that it is generally not a
bad idea).
Oops. |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
