| View previous topic :: View next topic |
| Author |
Message |
vinz486 at gmail.com
Guest
|
 Posted: Mon Jul 07, 2008 4:26 am Post subject: [asterisk-users] Codec negotiation for Thomson ST2030 and g7 |
 |
|
Hi all,
i'm trouble with codec setup on an asterisk machine 1.4.18 and some
Thomson ST2030 as extensions.
In the users.conf file for internal extension i have:
disallow=all
allow=g729
allow=alaw
allow=ulaw
Without any codec installed (i mean with original g729 of asterisk)
all go fine, calling from an extension to one other:
Peer User/ANR Call ID Seq (Tx/Rx) Format
Hold Last Message
10.9.9.9 202 11a6323d2ff 00102/00000 0x100 (g729)
No Tx: ACK
10.9.9.10 201 a8749-c0a80 00101/00001 0x100 (g729)
No Rx: ACK
Installing the open source binary of g279 (codec_g729.so in modules
dir) and restarting asterisk, the same call require transcoding:
Peer User/ANR Call ID Seq (Tx/Rx) Format
Hold Last Message
10.9.9.9 202 1992c2d149e 00102/00000 0x8 (alaw)
No Tx: ACK
10.9.9.10 201 140a6d-c0a8 00101/00001 0x100 (g729)
No Rx: ACK
The CALLED extension uses alaw instead of g729.
This uses a lot of CPU (up to 10% in my P3 machine).
Where is the trouble? Asterisk bug? Thomson do not recognize g729 GPL
as standard g729? I must set the framebuffer size?
If i set ONLY g729 as allowed codec all go fine: all calls uses the g729 codec.
Why codec negotian in the allow= list is not respected? Depends on
codec binary? It's strange...
Thanks to all...
---
PicoStreamer - the real WEB live streaming software
vinz486.com |
|
| Back to top |
|
 |
vinz486 at gmail.com
Guest
|
| Posted: Mon Jul 07, 2008 7:28 am Post subject: [asterisk-users] Codec negotiation for Thomson ST2030 and g7 |
|
|
On Mon, Jul 7, 2008 at 12:18 PM, Olivier <oza-4h07 at myamail.com> wrote:
| Quote: | If my memory serves me right, we could use Thomson ST2030 and Asterisk 1.4.
Have you tried with another soft or hardphone ?
|
Why not??? |
|
| Back to top |
|
|
|
Search
