VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
eric at fnords.org
Guest
|
 Posted: Sun Jul 06, 2008 6:28 pm Post subject: [asterisk-users] delay when rinigng asterisk |
 |
|
Tell your box to not expect Caller*ID information. You set that with
usercallerid=no in /etc/asterisk/zapata.conf
Since you are using the Asterisk Appliance you would have to contact
Digium for support.
Sydney Web Hosting wrote:
| Quote: | Hi All,
I have just setup an asterisk box (AA50) and all is running well.
however when I ring the phone number (analog lines) there seems to be a
delay.
I'm ringing from my mobile phone - It rings 4 times on my mobile before I
can hear it in the office.
Any ideas on how to shorten this time?
Thanks
Dave.
------------------------------------------------------------------------
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
--
Consulting for Asterisk, Polycom, Sangoma, Digium, Cisco, LAN, WAN, QoS,
T-1, PRI, Frame Relay, Linux, and network design. Based near
Birmingham, AL. Now accepting clients worldwide. |
|
| Back to top |
|
 |
dbailey at digium.com
Guest
|
| Posted: Mon Jul 07, 2008 7:49 am Post subject: [asterisk-users] delay when rinigng asterisk |
|
|
----- "Eric \"ManxPower\" Wieling" <eric at fnords.org> wrote:
| Quote: | Tell your box to not expect Caller*ID information. You set that with
usercallerid=no in /etc/asterisk/zapata.conf
Since you are using the Asterisk Appliance you would have to contact
Digium for support.
Sydney Web Hosting wrote:
| Quote: | Hi All,
I have just setup an asterisk box (AA50) and all is running well.
however when I ring the phone number (analog lines) there seems to
|
be a
| Quote: | delay.
I'm ringing from my mobile phone - It rings 4 times on my mobile
|
before I
| Quote: | can hear it in the office.
Any ideas on how to shorten this time?
Thanks
Dave.
|
|
I would avoid using zapata.conf on the AA50 as it is manipulated during
the boot process. The place to set these parameters is in the general
section of users.conf (which is where the gui places them.)
How is your unit connected to the PSTN. If you are using an analog input,
you will see its associated led flash when it detects ringing from the
PSTN. This may help you in determining when the ring is actually
occurring on the AA50.
I'd also encourage you to get in touch with the support group at Digium
as they are quite adept at getting over these types of issues.
- Doug |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
