VoIP Mailing List Archives

[helmut.kuper at ewetel.de]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

I try to establish a ISDN PRI (euroisdn/Q931) link between FS and an
AVAYA PBX. We use Sangoma A101 and FS revision 10729M on a Ubuntu 8.04
server in a non-root environment.

We experienced a timer problem which led to this FS console error message:

[ERR] Span:0 Q.921() Failed to establish Q.921 link in 3 retries


During anylizing this we found that q921 T203 is never reset when link
is in state "Multiple Frame Mode Established" and SABME frames are
received by FS. So it must timeout regardless if SABME frames are
received or not.
Additionally we found that the default T203 value (10 sec) was too short
for AVAYA (it has to be >=19 sec)

To fix the problem we changed two things in q921.c:

Change T203 default value from 10 sec to 20000 sec
Line 406: trunk->T203Timeout = 20000;

Change Q921T203TimerStart to Q921T203TimerReset to reset T203 on each
received SABME frame
Line 1996: Q921T203TimerReset(trunk, tei);

After recompiling FS the Error disapeared. Next week we will do some
calls over the link to make sure there are no other side effects.

Is it planned to make the q921 timeouts configurable in openzap.conf or
in openzap.conf.xml?

best regards
Helmut


PS: My openzap configs:

openzap.conf

[span wanpipe PRI_1]
trunk_type => E1
b-channel => 1:1-15
d-channel => 1:16
b-channel => 1:17-31




openzap.conf.xml

<configuration name="openzap.conf" description="OpenZAP Configuration">
<settings>
<param name="debug" value="7"/>
<!--<param name="hold-music" value="$${moh_uri}"/>-->
<!--<param name="enable-analog-option" value="call-swap"/>-->
<!--<param name="enable-analog-option" value="3-way"/>-->
</settings>
<pri_spans>
<span name="PRI_1">
<!-- Log Levels: none, alert, crit, err, warning, notice, info,
debug -->
<param name="q921loglevel" value="debug"/>
<param name="q931loglevel" value="debug"/>
<param name="mode" value="user"/>
<param name="dialect" value="Oh this is not my dialect"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
</span>
</pri_spans>
</configuration>

Very interesting here is, that the "dialect" parameter doesn't seem to
have an effect on FS. I use that one above without any errors or warning
and I guess that was not intended.



-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (MingW32)

iEYEARECAAYFAklCfB0ACgkQ4tZeNddg3dwZ2gCgovym/7R+5caEp1+fkupitN4p
BWsAn3FGWcT1CUsVx4W2cQ7chKM5qixB
=geXp
-----END PGP SIGNATURE-----

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[anthony.minessale at g...]

if you open a jira issue on it we can probably add your patch and/or the config option.
the users-list is a tough place to manage TDM issues.


On Fri, Dec 12, 2008 at 9:01 AM, Helmut Kuper <helmut.kuper@ewetel.de (helmut.kuper@ewetel.de)> wrote:

[msc at freeswitch.org]

On Fri, Dec 12, 2008 at 7:01 AM, Helmut Kuper <helmut.kuper@ewetel.de> wrote:

[mike at jerris.com]

Please file a bug on this issue

Mike

On Dec 13, 2008, at 3:51 PM, "Michael Collins" <msc@freeswitch.org>
wrote:

[msc at freeswitch.org]

Done: http://jira.freeswitch.org/browse/OPENZAP-37
-MC

On Sat, Dec 13, 2008 at 1:54 PM, Michael Jerris <mike@jerris.com> wrote:

[helmut.kuper at ewetel.de]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Hello Michael 1+2,

thank you for opening a bug. Otherwise I would have opened a bug today
after testing it a bit more.

regards
Helmut

Am 13.12.2008 23:53, schrieb Michael Collins:

[helmut.kuper at ewetel.de]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

OK, I opened a bug for T203 on jira:
http://jira.freeswitch.org/browse/OPENZAP-38

regards
helmut

Am 12.12.2008 16:18, schrieb Anthony Minessale: