VoIP Mailing List Archives

[freeswitch at ptmm.com]

I need to set up a system that would allow multiple mod_portaudio channels to be configured.

The calls would come in over SIP and any calls would be assigned a specific port on the multi-port sound card.

I would probably set it up so specific extensions go to specific ports, for example 1001 would be port 1 and 1008 would be port 8 on the sound card.

The documentation on the mod_portaudio module is very slim. In fact I would say it is nearly undocumented. Is it capable of handling multiple audio device ports (such as an 8-port LYNX sound card)?

If so how would it be interfaced/configured?

Thanks,

Clifford

[gmaruzz at celliax.org]

You can try making the lynx appear to Operating System like 8 single
soundcards (mono 1in 1out).
You can do this on Linux via the /etc/asound.conf

Then for each soundcard you created, you can start one portaudio channel


Sincerely,

Giovanni Maruzzelli
=========================================
Company : Celliax
Website: www.celliax.org
Address : via Pierlombardo 9, 20135 Milano
Country/Territory : Italy
Business Email: gmaruzz at celliax dot org
Cell : 39-347-2665618
Fax : 39-02-87390039




On Mon, Dec 15, 2008 at 11:56 AM, Clifford <freeswitch@ptmm.com> wrote: