VoIP Mailing List Archives :: View topic - [Freeswitch-users] close channels properly

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[Freeswitch-users] close channels properly

VoIP Mailing List Archives Forum Index -> freeSWITCH Users

View previous topic :: View next topic

Author

Message

brian at freeswitch.org
Guest

Posted: Mon Dec 22, 2008 9:44 am Post subject: [Freeswitch-users] close channels properly

What do you mean they close (hangup) after the 5 minute timeout?

/b

On Dec 22, 2008, at 7:35 AM, Carole O. wrote:

Quote:

1021 and 1022 are the speakers.
At the end of the announcement, since there is no noise anymore, the
speakers stop listening but they do not send any messages to tell
Freeswitch
it can close the opened channels. The channels are closed only after a
timeout of 5 minutes.

Does anybody know how I could force freeswitch to close all the
channels
after the announcement? I have seen there is the application
sched_hangup
but when I used it it only closes the channel to the caller and not
the
other ones.

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

carole.olivier at enst.fr
Guest

Posted: Tue Dec 23, 2008 2:05 am Post subject: [Freeswitch-users] close channels properly

Hello,

When I do a "show channels" in the cli the channels to the speakers are
listed even if the speakers have stopped transmitting. If I call the
speakers again freeswitch create new channels. If I do a "show channels"
again I can see the old and new ones. If I can keep doing this, each time
new channels are created while the old ones are still there.
I have noticed after 5 minutes the channels that are not used anymore close.
I believed there was a kind of timeout to detect the channels that are not
in use.

What I would like to know is if there is a way to close from these channels
the dialplan .

Thanks,
Carole

Brian West-3 wrote:

Quote:

What do you mean they close (hangup) after the 5 minute timeout?

/b

On Dec 22, 2008, at 7:35 AM, Carole O. wrote:

Quote:

--
View this message in context: http://www.nabble.com/close-channels-properly-tp21127913p21140461.html
Sent from the Freeswitch-users mailing list archive at Nabble.com.

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

brian at freeswitch.org
Guest

Posted: Tue Dec 23, 2008 10:07 am Post subject: [Freeswitch-users] close channels properly

Well in this context the phones need to hangup... they aren't going to
do so automatically. So you'll need to hang up on them or they will
need to hangup... or you can kick everyone from the conference with an
api command.

/b

On Dec 23, 2008, at 1:03 AM, Carole O. wrote:

Quote:

Hello,

When I do a "show channels" in the cli the channels to the speakers
are
listed even if the speakers have stopped transmitting. If I call the
speakers again freeswitch create new channels. If I do a "show
channels"
again I can see the old and new ones. If I can keep doing this, each
time
new channels are created while the old ones are still there.
I have noticed after 5 minutes the channels that are not used
anymore close.
I believed there was a kind of timeout to detect the channels that
are not
in use.

What I would like to know is if there is a way to close from these
channels
the dialplan .

Thanks,
Carole

msc at freeswitch.org
Guest

Posted: Tue Dec 23, 2008 10:55 am Post subject: [Freeswitch-users] close channels properly

Carole,

Are you calling the hangup app from the Dialplan?

-MC

Sent from my iPhone

On Dec 23, 2008, at 7:04 AM, Brian West <brian@freeswitch.org> wrote:

Quote:

Hello,

When I do a "show channels" in the cli the channels to the speakers
are
listed even if the speakers have stopped transmitting. If I call the
speakers again freeswitch create new channels. If I do a "show
channels"
again I can see the old and new ones. If I can keep doing this, each
time
new channels are created while the old ones are still there.
I have noticed after 5 minutes the channels that are not used
anymore close.
I believed there was a kind of timeout to detect the channels that
are not
in use.

What I would like to know is if there is a way to close from these
channels
the dialplan .

Thanks,
Carole

brian at freeswitch.org
Guest

Posted: Tue Dec 23, 2008 10:57 am Post subject: [Freeswitch-users] close channels properly

I think Carole is calling a group of people into a conference..
leaving and expecting everyone to get kicked.

/b

On Dec 23, 2008, at 9:53 AM, Michael S Collins wrote:

Quote:

Carole,

Are you calling the hangup app from the Dialplan?

-MC

Sent from my iPhone

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> freeSWITCH Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum