VoIP Mailing List Archives

[ashley.ohq at gmail.com]

Hi,

I am interested in testing Freeswitch acting as an SBC. Is it simply a matter of configuring the dialplan correctly, using RE's so that inbound calls are just forwarded to our internal PBX and outbound calls from the PBX are forwarded to the VOIP provider?

Or do I need to create an application that specifcally creates a new call and then joins the inbound and outbound calls?

I haven't been able to find info on the wiki or google re. SBC setup.


thanks
Ash

[sicfslist at gmail.com]

Hey Ashley,
When you say "SBC" what are you trying to accomplish specifically?

FS should be able to accomplish what you want ... but can you provide some more details as far as what you want to accomplish and I'm sure someone here will be glad to help.

SR

On Mon, Jan 12, 2009 at 2:02 AM, Ashley van Gerven <ashley.ohq@gmail.com (ashley.ohq@gmail.com)> wrote:

[dave at 3c.co.uk]

Hi Ash,

It's the former. Here's a snippet from a dialplan of ours - this
takes calls with a specific prefix from a specific IP address and
forwards them to a particular carrier:

<extension name="sample">
<condition field="network_addr" expression="^10\.1\.1\.12$" />
<condition field="destination_number" expression="^301(.*)$">
<action application="set" data="bypass_media=true" />
<action application="set" data="effective_caller_id_name=$
{caller_id_number}" />
<action application="set" data="effective_caller_id_number=$
{caller_id_number}" />
<action application="bridge" data="sofia/gateway/att/$1"/>
</condition>
</extension>

- you'll need something similar for each direction.

Cheers --

Dave

[intralanman at freeswi...]

David Knell wrote: